mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
11f12c17d7
fix typo Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
472 lines
12 KiB
C
472 lines
12 KiB
C
/*
|
|
* spi driver for rockchip
|
|
*
|
|
* (C) Copyright 2015 Google, Inc
|
|
*
|
|
* (C) Copyright 2008-2013 Rockchip Electronics
|
|
* Peter, Software Engineering, <superpeter.cai@gmail.com>.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <errno.h>
|
|
#include <spi.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/periph.h>
|
|
#include <dm/pinctrl.h>
|
|
#include "rk_spi.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Change to 1 to output registers at the start of each transaction */
|
|
#define DEBUG_RK_SPI 0
|
|
|
|
struct rockchip_spi_platdata {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_rockchip_rk3288_spi of_plat;
|
|
#endif
|
|
s32 frequency; /* Default clock frequency, -1 for none */
|
|
fdt_addr_t base;
|
|
uint deactivate_delay_us; /* Delay to wait after deactivate */
|
|
uint activate_delay_us; /* Delay to wait after activate */
|
|
};
|
|
|
|
struct rockchip_spi_priv {
|
|
struct rockchip_spi *regs;
|
|
struct clk clk;
|
|
unsigned int max_freq;
|
|
unsigned int mode;
|
|
ulong last_transaction_us; /* Time of last transaction end */
|
|
u8 bits_per_word; /* max 16 bits per word */
|
|
u8 n_bytes;
|
|
unsigned int speed_hz;
|
|
unsigned int last_speed_hz;
|
|
unsigned int tmode;
|
|
uint input_rate;
|
|
};
|
|
|
|
#define SPI_FIFO_DEPTH 32
|
|
|
|
static void rkspi_dump_regs(struct rockchip_spi *regs)
|
|
{
|
|
debug("ctrl0: \t\t0x%08x\n", readl(®s->ctrlr0));
|
|
debug("ctrl1: \t\t0x%08x\n", readl(®s->ctrlr1));
|
|
debug("ssienr: \t\t0x%08x\n", readl(®s->enr));
|
|
debug("ser: \t\t0x%08x\n", readl(®s->ser));
|
|
debug("baudr: \t\t0x%08x\n", readl(®s->baudr));
|
|
debug("txftlr: \t\t0x%08x\n", readl(®s->txftlr));
|
|
debug("rxftlr: \t\t0x%08x\n", readl(®s->rxftlr));
|
|
debug("txflr: \t\t0x%08x\n", readl(®s->txflr));
|
|
debug("rxflr: \t\t0x%08x\n", readl(®s->rxflr));
|
|
debug("sr: \t\t0x%08x\n", readl(®s->sr));
|
|
debug("imr: \t\t0x%08x\n", readl(®s->imr));
|
|
debug("isr: \t\t0x%08x\n", readl(®s->isr));
|
|
debug("dmacr: \t\t0x%08x\n", readl(®s->dmacr));
|
|
debug("dmatdlr: \t0x%08x\n", readl(®s->dmatdlr));
|
|
debug("dmardlr: \t0x%08x\n", readl(®s->dmardlr));
|
|
}
|
|
|
|
static void rkspi_enable_chip(struct rockchip_spi *regs, bool enable)
|
|
{
|
|
writel(enable ? 1 : 0, ®s->enr);
|
|
}
|
|
|
|
static void rkspi_set_clk(struct rockchip_spi_priv *priv, uint speed)
|
|
{
|
|
/*
|
|
* We should try not to exceed the speed requested by the caller:
|
|
* when selecting a divider, we need to make sure we round up.
|
|
*/
|
|
uint clk_div = DIV_ROUND_UP(priv->input_rate, speed);
|
|
|
|
/* The baudrate register (BAUDR) is defined as a 32bit register where
|
|
* the upper 16bit are reserved and having 'Fsclk_out' in the lower
|
|
* 16bits with 'Fsclk_out' defined as follows:
|
|
*
|
|
* Fsclk_out = Fspi_clk/ SCKDV
|
|
* Where SCKDV is any even value between 2 and 65534.
|
|
*/
|
|
if (clk_div > 0xfffe) {
|
|
clk_div = 0xfffe;
|
|
debug("%s: can't divide down to %d Hz (actual will be %d Hz)\n",
|
|
__func__, speed, priv->input_rate / clk_div);
|
|
}
|
|
|
|
/* Round up to the next even 16bit number */
|
|
clk_div = (clk_div + 1) & 0xfffe;
|
|
|
|
debug("spi speed %u, div %u\n", speed, clk_div);
|
|
|
|
clrsetbits_le32(&priv->regs->baudr, 0xffff, clk_div);
|
|
priv->last_speed_hz = speed;
|
|
}
|
|
|
|
static int rkspi_wait_till_not_busy(struct rockchip_spi *regs)
|
|
{
|
|
unsigned long start;
|
|
|
|
start = get_timer(0);
|
|
while (readl(®s->sr) & SR_BUSY) {
|
|
if (get_timer(start) > ROCKCHIP_SPI_TIMEOUT_MS) {
|
|
debug("RK SPI: Status keeps busy for 1000us after a read/write!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spi_cs_activate(struct udevice *dev, uint cs)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_platdata *plat = bus->platdata;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
struct rockchip_spi *regs = priv->regs;
|
|
|
|
/* If it's too soon to do another transaction, wait */
|
|
if (plat->deactivate_delay_us && priv->last_transaction_us) {
|
|
ulong delay_us; /* The delay completed so far */
|
|
delay_us = timer_get_us() - priv->last_transaction_us;
|
|
if (delay_us < plat->deactivate_delay_us)
|
|
udelay(plat->deactivate_delay_us - delay_us);
|
|
}
|
|
|
|
debug("activate cs%u\n", cs);
|
|
writel(1 << cs, ®s->ser);
|
|
if (plat->activate_delay_us)
|
|
udelay(plat->activate_delay_us);
|
|
}
|
|
|
|
static void spi_cs_deactivate(struct udevice *dev, uint cs)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_platdata *plat = bus->platdata;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
struct rockchip_spi *regs = priv->regs;
|
|
|
|
debug("deactivate cs%u\n", cs);
|
|
writel(0, ®s->ser);
|
|
|
|
/* Remember time of this transaction so we can honour the bus delay */
|
|
if (plat->deactivate_delay_us)
|
|
priv->last_transaction_us = timer_get_us();
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
static int conv_of_platdata(struct udevice *dev)
|
|
{
|
|
struct rockchip_spi_platdata *plat = dev->platdata;
|
|
struct dtd_rockchip_rk3288_spi *dtplat = &plat->of_plat;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
plat->base = dtplat->reg[0];
|
|
plat->frequency = 20000000;
|
|
ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
dev->req_seq = 0;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int rockchip_spi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
plat->base = dev_read_addr(bus);
|
|
|
|
ret = clk_get_by_index(bus, 0, &priv->clk);
|
|
if (ret < 0) {
|
|
debug("%s: Could not get clock for %s: %d\n", __func__,
|
|
bus->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
plat->frequency =
|
|
dev_read_u32_default(bus, "spi-max-frequency", 50000000);
|
|
plat->deactivate_delay_us =
|
|
dev_read_u32_default(bus, "spi-deactivate-delay", 0);
|
|
plat->activate_delay_us =
|
|
dev_read_u32_default(bus, "spi-activate-delay", 0);
|
|
|
|
debug("%s: base=%x, max-frequency=%d, deactivate_delay=%d\n",
|
|
__func__, (uint)plat->base, plat->frequency,
|
|
plat->deactivate_delay_us);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_calc_modclk(ulong max_freq)
|
|
{
|
|
/*
|
|
* While this is not strictly correct for the RK3368, as the
|
|
* GPLL will be 576MHz, things will still work, as the
|
|
* clk_set_rate(...) implementation in our clock-driver will
|
|
* chose the next closest rate not exceeding what we request
|
|
* based on the output of this function.
|
|
*/
|
|
|
|
unsigned div;
|
|
const unsigned long gpll_hz = 594000000UL;
|
|
|
|
/*
|
|
* We need to find an input clock that provides at least twice
|
|
* the maximum frequency and can be generated from the assumed
|
|
* speed of GPLL (594MHz) using an integer divider.
|
|
*
|
|
* To give us more achievable bitrates at higher speeds (these
|
|
* are generated by dividing by an even 16-bit integer from
|
|
* this frequency), we try to have an input frequency of at
|
|
* least 4x our max_freq.
|
|
*/
|
|
|
|
div = DIV_ROUND_UP(gpll_hz, max_freq * 4);
|
|
return gpll_hz / div;
|
|
}
|
|
|
|
static int rockchip_spi_probe(struct udevice *bus)
|
|
{
|
|
struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
debug("%s: probe\n", __func__);
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
ret = conv_of_platdata(bus);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
priv->regs = (struct rockchip_spi *)plat->base;
|
|
|
|
priv->last_transaction_us = timer_get_us();
|
|
priv->max_freq = plat->frequency;
|
|
|
|
/* Clamp the value from the DTS against any hardware limits */
|
|
if (priv->max_freq > ROCKCHIP_SPI_MAX_RATE)
|
|
priv->max_freq = ROCKCHIP_SPI_MAX_RATE;
|
|
|
|
/* Find a module-input clock that fits with the max_freq setting */
|
|
ret = clk_set_rate(&priv->clk,
|
|
rockchip_spi_calc_modclk(priv->max_freq));
|
|
if (ret < 0) {
|
|
debug("%s: Failed to set clock: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
priv->input_rate = ret;
|
|
debug("%s: rate = %u\n", __func__, priv->input_rate);
|
|
priv->bits_per_word = 8;
|
|
priv->tmode = TMOD_TR; /* Tx & Rx */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
struct rockchip_spi *regs = priv->regs;
|
|
u8 spi_dfs, spi_tf;
|
|
uint ctrlr0;
|
|
|
|
/* Disable the SPI hardware */
|
|
rkspi_enable_chip(regs, 0);
|
|
|
|
switch (priv->bits_per_word) {
|
|
case 8:
|
|
priv->n_bytes = 1;
|
|
spi_dfs = DFS_8BIT;
|
|
spi_tf = HALF_WORD_OFF;
|
|
break;
|
|
case 16:
|
|
priv->n_bytes = 2;
|
|
spi_dfs = DFS_16BIT;
|
|
spi_tf = HALF_WORD_ON;
|
|
break;
|
|
default:
|
|
debug("%s: unsupported bits: %dbits\n", __func__,
|
|
priv->bits_per_word);
|
|
return -EPROTONOSUPPORT;
|
|
}
|
|
|
|
if (priv->speed_hz != priv->last_speed_hz)
|
|
rkspi_set_clk(priv, priv->speed_hz);
|
|
|
|
/* Operation Mode */
|
|
ctrlr0 = OMOD_MASTER << OMOD_SHIFT;
|
|
|
|
/* Data Frame Size */
|
|
ctrlr0 |= spi_dfs << DFS_SHIFT;
|
|
|
|
/* set SPI mode 0..3 */
|
|
if (priv->mode & SPI_CPOL)
|
|
ctrlr0 |= SCOL_HIGH << SCOL_SHIFT;
|
|
if (priv->mode & SPI_CPHA)
|
|
ctrlr0 |= SCPH_TOGSTA << SCPH_SHIFT;
|
|
|
|
/* Chip Select Mode */
|
|
ctrlr0 |= CSM_KEEP << CSM_SHIFT;
|
|
|
|
/* SSN to Sclk_out delay */
|
|
ctrlr0 |= SSN_DELAY_ONE << SSN_DELAY_SHIFT;
|
|
|
|
/* Serial Endian Mode */
|
|
ctrlr0 |= SEM_LITTLE << SEM_SHIFT;
|
|
|
|
/* First Bit Mode */
|
|
ctrlr0 |= FBM_MSB << FBM_SHIFT;
|
|
|
|
/* Byte and Halfword Transform */
|
|
ctrlr0 |= spi_tf << HALF_WORD_TX_SHIFT;
|
|
|
|
/* Rxd Sample Delay */
|
|
ctrlr0 |= 0 << RXDSD_SHIFT;
|
|
|
|
/* Frame Format */
|
|
ctrlr0 |= FRF_SPI << FRF_SHIFT;
|
|
|
|
/* Tx and Rx mode */
|
|
ctrlr0 |= (priv->tmode & TMOD_MASK) << TMOD_SHIFT;
|
|
|
|
writel(ctrlr0, ®s->ctrlr0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_release_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
rkspi_enable_chip(priv->regs, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
struct rockchip_spi *regs = priv->regs;
|
|
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
|
|
int len = bitlen >> 3;
|
|
const u8 *out = dout;
|
|
u8 *in = din;
|
|
int toread, towrite;
|
|
int ret;
|
|
|
|
debug("%s: dout=%p, din=%p, len=%x, flags=%lx\n", __func__, dout, din,
|
|
len, flags);
|
|
if (DEBUG_RK_SPI)
|
|
rkspi_dump_regs(regs);
|
|
|
|
/* Assert CS before transfer */
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(dev, slave_plat->cs);
|
|
|
|
while (len > 0) {
|
|
int todo = min(len, 0xffff);
|
|
|
|
rkspi_enable_chip(regs, false);
|
|
writel(todo - 1, ®s->ctrlr1);
|
|
rkspi_enable_chip(regs, true);
|
|
|
|
toread = todo;
|
|
towrite = todo;
|
|
while (toread || towrite) {
|
|
u32 status = readl(®s->sr);
|
|
|
|
if (towrite && !(status & SR_TF_FULL)) {
|
|
writel(out ? *out++ : 0, regs->txdr);
|
|
towrite--;
|
|
}
|
|
if (toread && !(status & SR_RF_EMPT)) {
|
|
u32 byte = readl(regs->rxdr);
|
|
|
|
if (in)
|
|
*in++ = byte;
|
|
toread--;
|
|
}
|
|
}
|
|
ret = rkspi_wait_till_not_busy(regs);
|
|
if (ret)
|
|
break;
|
|
len -= todo;
|
|
}
|
|
|
|
/* Deassert CS after transfer */
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(dev, slave_plat->cs);
|
|
|
|
rkspi_enable_chip(regs, false);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rockchip_spi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
/* Clamp to the maximum frequency specified in the DTS */
|
|
if (speed > priv->max_freq)
|
|
speed = priv->max_freq;
|
|
|
|
priv->speed_hz = speed;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops rockchip_spi_ops = {
|
|
.claim_bus = rockchip_spi_claim_bus,
|
|
.release_bus = rockchip_spi_release_bus,
|
|
.xfer = rockchip_spi_xfer,
|
|
.set_speed = rockchip_spi_set_speed,
|
|
.set_mode = rockchip_spi_set_mode,
|
|
/*
|
|
* cs_info is not needed, since we require all chip selects to be
|
|
* in the device tree explicitly
|
|
*/
|
|
};
|
|
|
|
static const struct udevice_id rockchip_spi_ids[] = {
|
|
{ .compatible = "rockchip,rk3288-spi" },
|
|
{ .compatible = "rockchip,rk3368-spi" },
|
|
{ .compatible = "rockchip,rk3399-spi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_spi) = {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.name = "rockchip_rk3288_spi",
|
|
#else
|
|
.name = "rockchip_spi",
|
|
#endif
|
|
.id = UCLASS_SPI,
|
|
.of_match = rockchip_spi_ids,
|
|
.ops = &rockchip_spi_ops,
|
|
.ofdata_to_platdata = rockchip_spi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct rockchip_spi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct rockchip_spi_priv),
|
|
.probe = rockchip_spi_probe,
|
|
};
|