mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
1221ce459d
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
302 lines
6.1 KiB
C
302 lines
6.1 KiB
C
/*
|
|
* (C) Copyright 2012
|
|
* Valentin Lontgchamp, Keymile AG, valentin.longchamp@keymile.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <miiphy.h>
|
|
#include <linux/errno.h>
|
|
#include <mv88e6352.h>
|
|
|
|
#define SMI_HDR ((0x8 | 0x1) << 12)
|
|
#define SMI_BUSY_MASK (0x8000)
|
|
#define SMIRD_OP (0x2 << 10)
|
|
#define SMIWR_OP (0x1 << 10)
|
|
#define SMI_MASK 0x1f
|
|
#define PORT_SHIFT 5
|
|
|
|
#define COMMAND_REG 0
|
|
#define DATA_REG 1
|
|
|
|
/* global registers */
|
|
#define GLOBAL 0x1b
|
|
|
|
#define GLOBAL_STATUS 0x00
|
|
#define PPU_STATE 0x8000
|
|
|
|
#define GLOBAL_CTRL 0x04
|
|
#define SW_RESET 0x8000
|
|
#define PPU_ENABLE 0x4000
|
|
|
|
static int sw_wait_rdy(const char *devname, u8 phy_addr)
|
|
{
|
|
u16 command;
|
|
u32 timeout = 100;
|
|
int ret;
|
|
|
|
/* wait till the SMI is not busy */
|
|
do {
|
|
/* read command register */
|
|
ret = miiphy_read(devname, phy_addr, COMMAND_REG, &command);
|
|
if (ret < 0) {
|
|
printf("%s: Error reading command register\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
if (timeout-- == 0) {
|
|
printf("Err..(%s) SMI busy timeout\n", __func__);
|
|
return -EFAULT;
|
|
}
|
|
} while (command & SMI_BUSY_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sw_reg_read(const char *devname, u8 phy_addr, u8 port,
|
|
u8 reg, u16 *data)
|
|
{
|
|
int ret;
|
|
u16 command;
|
|
|
|
ret = sw_wait_rdy(devname, phy_addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
command = SMI_HDR | SMIRD_OP | ((port&SMI_MASK) << PORT_SHIFT) |
|
|
(reg & SMI_MASK);
|
|
debug("%s: write to command: %#x\n", __func__, command);
|
|
ret = miiphy_write(devname, phy_addr, COMMAND_REG, command);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sw_wait_rdy(devname, phy_addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = miiphy_read(devname, phy_addr, DATA_REG, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sw_reg_write(const char *devname, u8 phy_addr, u8 port,
|
|
u8 reg, u16 data)
|
|
{
|
|
int ret;
|
|
u16 value;
|
|
|
|
ret = sw_wait_rdy(devname, phy_addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
debug("%s: write to data: %#x\n", __func__, data);
|
|
ret = miiphy_write(devname, phy_addr, DATA_REG, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
value = SMI_HDR | SMIWR_OP | ((port & SMI_MASK) << PORT_SHIFT) |
|
|
(reg & SMI_MASK);
|
|
debug("%s: write to command: %#x\n", __func__, value);
|
|
ret = miiphy_write(devname, phy_addr, COMMAND_REG, value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sw_wait_rdy(devname, phy_addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ppu_enable(const char *devname, u8 phy_addr)
|
|
{
|
|
int i, ret = 0;
|
|
u16 reg;
|
|
|
|
ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, ®);
|
|
if (ret) {
|
|
printf("%s: Error reading global ctrl reg\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
reg |= PPU_ENABLE;
|
|
|
|
ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
|
|
if (ret) {
|
|
printf("%s: Error writing global ctrl reg\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
|
|
®);
|
|
if ((reg & 0xc000) == 0xc000)
|
|
return 0;
|
|
udelay(1000);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int ppu_disable(const char *devname, u8 phy_addr)
|
|
{
|
|
int i, ret = 0;
|
|
u16 reg;
|
|
|
|
ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, ®);
|
|
if (ret) {
|
|
printf("%s: Error reading global ctrl reg\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
reg &= ~PPU_ENABLE;
|
|
|
|
ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
|
|
if (ret) {
|
|
printf("%s: Error writing global ctrl reg\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
|
|
®);
|
|
if ((reg & 0xc000) != 0xc000)
|
|
return 0;
|
|
udelay(1000);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
int mv88e_sw_program(const char *devname, u8 phy_addr,
|
|
struct mv88e_sw_reg *regs, int regs_nb)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
/* first we need to disable the PPU */
|
|
ret = ppu_disable(devname, phy_addr);
|
|
if (ret) {
|
|
printf("%s: Error disabling PPU\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < regs_nb; i++) {
|
|
ret = sw_reg_write(devname, phy_addr, regs[i].port,
|
|
regs[i].reg, regs[i].value);
|
|
if (ret) {
|
|
printf("%s: Error configuring switch\n", __func__);
|
|
ppu_enable(devname, phy_addr);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* re-enable the PPU */
|
|
ret = ppu_enable(devname, phy_addr);
|
|
if (ret) {
|
|
printf("%s: Error enabling PPU\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mv88e_sw_reset(const char *devname, u8 phy_addr)
|
|
{
|
|
int i, ret = 0;
|
|
u16 reg;
|
|
|
|
ret = sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_CTRL, ®);
|
|
if (ret) {
|
|
printf("%s: Error reading global ctrl reg\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
reg = SW_RESET | PPU_ENABLE | 0x0400;
|
|
|
|
ret = sw_reg_write(devname, phy_addr, GLOBAL, GLOBAL_CTRL, reg);
|
|
if (ret) {
|
|
printf("%s: Error writing global ctrl reg\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
sw_reg_read(devname, phy_addr, GLOBAL, GLOBAL_STATUS,
|
|
®);
|
|
if ((reg & 0xc800) != 0xc800)
|
|
return 0;
|
|
udelay(1000);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
int do_mvsw_reg_read(const char *name, int argc, char * const argv[])
|
|
{
|
|
u16 value = 0, phyaddr, reg, port;
|
|
int ret;
|
|
|
|
phyaddr = simple_strtoul(argv[1], NULL, 10);
|
|
port = simple_strtoul(argv[2], NULL, 10);
|
|
reg = simple_strtoul(argv[3], NULL, 10);
|
|
|
|
ret = sw_reg_read(name, phyaddr, port, reg, &value);
|
|
printf("%#x\n", value);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int do_mvsw_reg_write(const char *name, int argc, char * const argv[])
|
|
{
|
|
u16 value = 0, phyaddr, reg, port;
|
|
int ret;
|
|
|
|
phyaddr = simple_strtoul(argv[1], NULL, 10);
|
|
port = simple_strtoul(argv[2], NULL, 10);
|
|
reg = simple_strtoul(argv[3], NULL, 10);
|
|
value = simple_strtoul(argv[4], NULL, 16);
|
|
|
|
ret = sw_reg_write(name, phyaddr, port, reg, value);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
int do_mvsw_reg(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int ret;
|
|
const char *cmd, *ethname;
|
|
|
|
if (argc < 2)
|
|
return cmd_usage(cmdtp);
|
|
|
|
cmd = argv[1];
|
|
--argc;
|
|
++argv;
|
|
|
|
if (strcmp(cmd, "read") == 0) {
|
|
if (argc < 5)
|
|
return cmd_usage(cmdtp);
|
|
ethname = argv[1];
|
|
--argc;
|
|
++argv;
|
|
ret = do_mvsw_reg_read(ethname, argc, argv);
|
|
} else if (strcmp(cmd, "write") == 0) {
|
|
if (argc < 6)
|
|
return cmd_usage(cmdtp);
|
|
ethname = argv[1];
|
|
--argc;
|
|
++argv;
|
|
ret = do_mvsw_reg_write(ethname, argc, argv);
|
|
} else
|
|
return cmd_usage(cmdtp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
mvsw_reg, 7, 1, do_mvsw_reg,
|
|
"marvell 88e6352 switch register access",
|
|
"write ethname phyaddr port reg value\n"
|
|
"mvsw_reg read ethname phyaddr port reg\n"
|
|
);
|