u-boot/arch/arm
Jorge Ramirez-Ortiz d754254f20 ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards
This port adds support for:
        1) Serial
        2) eMMC
        3) USB

It has been tested with ARM TRUSTED FIRMWARE running u-boot as the
BL33 executable [see board's README]

eMMC has been tested for reading and booting the loader and linux
kernels as well as saving the u-boot environment.

USB has been tested with ASIX networking adapter and SanDisk 7.4GB
drive.

PSCI has been tested via the reset call (PSCI executes from DDR)

The firwmare upgrade process has been tested via TFTP and USB FAT
filesystem containing the fastboot.bin image in one of the partitions.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2017-07-10 14:26:03 -04:00
..
cpu arm64: use psci reset on snapdragon 2017-07-06 16:17:13 -04:00
dts ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards 2017-07-10 14:26:03 -04:00
imx-common drivers: pci: imx: add imx_pcie_remove function 2017-05-31 10:09:03 +02:00
include ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards 2017-07-10 14:26:03 -04:00
lib Revert "armv7m: Disable D-cache when booting nommu(ARMv7M) Linux kernel" 2017-06-29 21:18:48 -04:00
mach-aspeed aspeed: Refactor SCU to use consistent mask & shift 2017-05-08 11:57:35 -04:00
mach-at91 ARM: atmel: Rename MA5D4EVK 2017-06-29 13:30:27 -04:00
mach-bcm283x bcm2835_wdt: support for the BCM2835/2836 watchdog 2017-05-09 20:30:08 -04:00
mach-davinci common: arm: davinci: Move header file out of common 2017-06-05 12:31:23 -04:00
mach-exynos Kconfig: Finish migration of hashing commands 2017-05-31 19:38:14 -04:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables 2017-07-10 14:25:57 -04:00
mach-kirkwood Kconfig: Add a CONFIG_IDE option 2017-05-22 12:45:27 -04:00
mach-meson board_f: Drop setup_dram_config() wrapper 2017-04-05 16:36:51 -04:00
mach-mvebu dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
mach-omap2 ti816x: Add additional boot device detection logic 2017-06-23 10:38:03 -04:00
mach-orion5x board_f: Drop setup_dram_config() wrapper 2017-04-05 16:36:51 -04:00
mach-rmobile mmc: sh_sdhi: Add MMC version 5.0 support 2017-06-09 20:25:16 +09:00
mach-rockchip rockchip: rk3288: Allow setting up clocks in U-Boot proper 2017-06-09 13:45:34 -06:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
mach-socfpga Convert CONFIG_SPL_BOARD_INIT to Kconfig 2017-05-22 07:29:48 -04:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 stm32: Correct positioning of declaration 2017-07-06 16:17:17 -04:00
mach-sunxi sunxi: add LPDDR3 timing from stock boot0 2017-06-08 22:37:55 +05:30
mach-tegra ARM: tegra: remove Whistler support 2017-06-12 13:03:50 -07:00
mach-uniphier ARM: uniphier: fix various sparse warnings 2017-06-25 06:06:09 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq arm: zynq: Add Kconfig option for any DDR specific initialization 2017-06-20 16:41:44 +02:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk arm: Always keep the dtb section on objcopy 2017-06-05 14:13:11 -04:00
Kconfig ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards 2017-07-10 14:26:03 -04:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig 2017-04-27 16:49:08 -04:00