mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
421e7a41c6
struct sunxi_prcm_reg is naturally packed. There is no need to define it as
packed. Defining it as packed leads to compilation errors with GCC 9.2.1:
CC arch/arm/lib/reloc_arm_efi.o
arch/arm/cpu/armv7/sunxi/psci.c: In function ‘sunxi_cpu_set_power’:
:qarch/arm/cpu/armv7/sunxi/psci.c:163:21: error: taking address of packed
member of ‘struct sunxi_prcm_reg’ may result in an unaligned pointer value
[-Werror=address-of-packed-member]
163 | sunxi_power_switch(&prcm->cpu_pwr_clamp[cpu], &prcm->cpu_pwroff,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Remove __packed attribute from struct sunxi_prcm_reg.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
247 lines
9.3 KiB
C
247 lines
9.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Sunxi A31 Power Management Unit register definition.
|
|
*
|
|
* (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
|
|
* http://linux-sunxi.org
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Berg Xing <bergxing@allwinnertech.com>
|
|
* Tom Cubie <tangliang@allwinnertech.com>
|
|
*/
|
|
|
|
#ifndef _SUNXI_PRCM_H
|
|
#define _SUNXI_PRCM_H
|
|
|
|
#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4)
|
|
#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3)
|
|
#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1)
|
|
#define PRCM_CPUS_CFG_PRE_DIV(n) \
|
|
__PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n))
|
|
#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8)
|
|
#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f)
|
|
#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1)
|
|
#define PRCM_CPUS_CFG_POST_DIV(n) \
|
|
__PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n))
|
|
#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16)
|
|
#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3)
|
|
#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0
|
|
#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1
|
|
#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2
|
|
#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3
|
|
#define PRCM_CPUS_CFG_CLK_SRC_LOSC \
|
|
__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC)
|
|
#define PRCM_CPUS_CFG_CLK_SRC_HOSC \
|
|
__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC)
|
|
#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \
|
|
__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6)
|
|
#define PRCM_CPUS_CFG_CLK_SRC_PDIV \
|
|
__PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV)
|
|
|
|
#define __PRCM_APB0_RATIO(n) (((n) & 0x3) << 0)
|
|
#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3)
|
|
#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1)
|
|
#define PRCM_APB0_RATIO_DIV(n) \
|
|
__PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n))
|
|
|
|
#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0)
|
|
#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1)
|
|
|
|
#define PRCM_APB0_GATE_PIO (0x1 << 0)
|
|
#define PRCM_APB0_GATE_IR (0x1 << 1)
|
|
#define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
|
|
#define PRCM_APB0_GATE_P2WI (0x1 << 3) /* sun6i */
|
|
#define PRCM_APB0_GATE_RSB (0x1 << 3) /* sun8i */
|
|
#define PRCM_APB0_GATE_UART (0x1 << 4)
|
|
#define PRCM_APB0_GATE_1WIRE (0x1 << 5)
|
|
#define PRCM_APB0_GATE_I2C (0x1 << 6)
|
|
|
|
#define PRCM_APB0_RESET_PIO (0x1 << 0)
|
|
#define PRCM_APB0_RESET_IR (0x1 << 1)
|
|
#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
|
|
#define PRCM_APB0_RESET_P2WI (0x1 << 3)
|
|
#define PRCM_APB0_RESET_UART (0x1 << 4)
|
|
#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
|
|
#define PRCM_APB0_RESET_I2C (0x1 << 6)
|
|
|
|
#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0)
|
|
#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1)
|
|
#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4)
|
|
#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \
|
|
__PRCM_PLL_CTRL_USB_CLK_SRC(0x3)
|
|
#define __PRCM_PLL_CTRL_USB_CLK_0 0x0
|
|
#define __PRCM_PLL_CTRL_USB_CLK_1 0x1
|
|
#define __PRCM_PLL_CTRL_USB_CLK_2 0x2
|
|
#define __PRCM_PLL_CTRL_USB_CLK_3 0x3
|
|
#define PRCM_PLL_CTRL_USB_CLK_0 \
|
|
__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0)
|
|
#define PRCM_PLL_CTRL_USB_CLK_1 \
|
|
__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1)
|
|
#define PRCM_PLL_CTRL_USB_CLK_2 \
|
|
__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2)
|
|
#define PRCM_PLL_CTRL_USB_CLK_3 \
|
|
__PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3)
|
|
#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12)
|
|
#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \
|
|
__PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3)
|
|
#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \
|
|
__PRCM_PLL_CTRL_INT_PLL_IN_SEL(n)
|
|
#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20)
|
|
#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \
|
|
__PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3)
|
|
#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0
|
|
#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1
|
|
#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2
|
|
#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3
|
|
#define PRCM_PLL_CTRL_HOSC_CLK_0 \
|
|
__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0)
|
|
#define PRCM_PLL_CTRL_HOSC_CLK_1 \
|
|
__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1)
|
|
#define PRCM_PLL_CTRL_HOSC_CLK_2 \
|
|
__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2)
|
|
#define PRCM_PLL_CTRL_HOSC_CLK_3 \
|
|
__PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3)
|
|
#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24)
|
|
#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0)
|
|
#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1)
|
|
#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2)
|
|
#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3)
|
|
#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */
|
|
#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16)
|
|
#define PRCM_PLL_CTRL_LDO_OUT_MASK \
|
|
__PRCM_PLL_CTRL_LDO_OUT(0x7)
|
|
/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
|
|
#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
|
|
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
|
|
#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
|
|
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
|
|
#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
|
|
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
|
|
#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
|
|
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
|
|
#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
|
|
#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
|
|
|
|
#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
|
|
|
|
#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0)
|
|
#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf)
|
|
#define __PRCM_CLK_MOD0_M_X(n) (n - 1)
|
|
#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n))
|
|
#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8)
|
|
#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7)
|
|
#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16)
|
|
#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3)
|
|
#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) - 1)
|
|
#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n))
|
|
#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20)
|
|
#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7)
|
|
#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24)
|
|
#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7)
|
|
#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31)
|
|
|
|
#define PRCM_APB0_RESET_PIO (0x1 << 0)
|
|
#define PRCM_APB0_RESET_IR (0x1 << 1)
|
|
#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
|
|
#define PRCM_APB0_RESET_P2WI (0x1 << 3)
|
|
#define PRCM_APB0_RESET_UART (0x1 << 4)
|
|
#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
|
|
#define PRCM_APB0_RESET_I2C (0x1 << 6)
|
|
|
|
#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8)
|
|
#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7)
|
|
#define __PRCM_CLK_OUTD_M_X() ((n) - 1)
|
|
#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n))
|
|
#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20)
|
|
#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7)
|
|
#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1)
|
|
#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n)
|
|
#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24)
|
|
#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3)
|
|
#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0
|
|
#define __PRCM_CLK_OUTD_SRC_LOSC 0x1
|
|
#define __PRCM_CLK_OUTD_SRC_HOSC 0x2
|
|
#define __PRCM_CLK_OUTD_SRC_ERR 0x3
|
|
#define PRCM_CLK_OUTD_SRC_LOSC2 \
|
|
#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2)
|
|
#define PRCM_CLK_OUTD_SRC_LOSC \
|
|
#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC)
|
|
#define PRCM_CLK_OUTD_SRC_HOSC \
|
|
#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC)
|
|
#define PRCM_CLK_OUTD_SRC_ERR \
|
|
#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR)
|
|
#define PRCM_CLK_OUTD_EN (0x1 << 31)
|
|
|
|
#define PRCM_CPU0_PWROFF (0x1 << 0)
|
|
#define PRCM_CPU1_PWROFF (0x1 << 1)
|
|
#define PRCM_CPU2_PWROFF (0x1 << 2)
|
|
#define PRCM_CPU3_PWROFF (0x1 << 3)
|
|
#define PRCM_CPU_ALL_PWROFF (0xf << 0)
|
|
|
|
#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0)
|
|
#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1)
|
|
#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2)
|
|
#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3)
|
|
|
|
#define PRCM_VDD_GPU_PWROFF (0x1 << 0)
|
|
|
|
#define PRCM_VDD_SYS_RESET (0x1 << 0)
|
|
|
|
#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0)
|
|
#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff)
|
|
|
|
#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0)
|
|
#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff)
|
|
|
|
#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
|
|
#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
|
|
|
|
#define PRCM_SEC_SWITCH_APB0_CLK_NONSEC (0x1 << 0)
|
|
#define PRCM_SEC_SWITCH_PLL_CFG_NONSEC (0x1 << 1)
|
|
#define PRCM_SEC_SWITCH_PWR_GATE_NONSEC (0x1 << 2)
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#include <linux/compiler.h>
|
|
|
|
struct sunxi_prcm_reg {
|
|
u32 cpus_cfg; /* 0x000 */
|
|
u8 res0[0x8]; /* 0x004 */
|
|
u32 apb0_ratio; /* 0x00c */
|
|
u32 cpu0_cfg; /* 0x010 */
|
|
u32 cpu1_cfg; /* 0x014 */
|
|
u32 cpu2_cfg; /* 0x018 */
|
|
u32 cpu3_cfg; /* 0x01c */
|
|
u8 res1[0x8]; /* 0x020 */
|
|
u32 apb0_gate; /* 0x028 */
|
|
u8 res2[0x14]; /* 0x02c */
|
|
u32 pll_ctrl0; /* 0x040 */
|
|
u32 pll_ctrl1; /* 0x044 */
|
|
u8 res3[0x8]; /* 0x048 */
|
|
u32 clk_1wire; /* 0x050 */
|
|
u32 clk_ir; /* 0x054 */
|
|
u8 res4[0x58]; /* 0x058 */
|
|
u32 apb0_reset; /* 0x0b0 */
|
|
u8 res5[0x3c]; /* 0x0b4 */
|
|
u32 clk_outd; /* 0x0f0 */
|
|
u8 res6[0xc]; /* 0x0f4 */
|
|
u32 cpu_pwroff; /* 0x100 */
|
|
u8 res7[0xc]; /* 0x104 */
|
|
u32 vdd_sys_pwroff; /* 0x110 */
|
|
u8 res8[0x4]; /* 0x114 */
|
|
u32 gpu_pwroff; /* 0x118 */
|
|
u8 res9[0x4]; /* 0x11c */
|
|
u32 vdd_pwr_reset; /* 0x120 */
|
|
u8 res10[0x1c]; /* 0x124 */
|
|
u32 cpu_pwr_clamp[4]; /* 0x140 but first one is actually unused */
|
|
u8 res11[0x30]; /* 0x150 */
|
|
u32 dram_pwr; /* 0x180 */
|
|
u8 res12[0xc]; /* 0x184 */
|
|
u32 dram_tst; /* 0x190 */
|
|
u8 res13[0x3c]; /* 0x194 */
|
|
u32 prcm_sec_switch; /* 0x1d0 */
|
|
};
|
|
|
|
void prcm_apb0_enable(u32 flags);
|
|
void prcm_apb0_disable(u32 flags);
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* _PRCM_H */
|