mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
db2f721ffc
Add support for Motorola MPC8266ADS board
* Patch by Kyle Harris, 19 Feb 2003:
patches for the Intel lubbock board:
memsetup.S - general cleanup (based on Robert's csb226 code)
flash.c - overhaul, actually works now
lubbock.c - fix init funcs to return proper value
* Patch by Kenneth Johansson, 26 Feb 2003:
- Fixed off by one in RFTA calculation.
- No need to abort when LDF is lower than we can program it's only
minimum timing so clamp it to what we can do.
- Takes function pointer to function for reading the spd_nvram. Usefull
for faking data or hardcode a module without the nvram.
- fix other user for above change
- fix some comments.
* Patches by Brian Waite, 26 Feb 2003:
- fix port for evb64260 board
- fix PCI for evb64260 board
- fix PCI scan
* Patch by Reinhard Meyer, 1 Mar 2003:
Add support for EMK TOP860 Module
* Patch by Yuli Barcohen, 02 Mar 2003:
Add SPD EEPROM support for MPC8260ADS board
78 lines
5 KiB
C
78 lines
5 KiB
C
/*
|
|
* Copyright (C) 2003 Arabella Software Ltd.
|
|
* Yuli Barcohen <yuli@arabellasw.com>
|
|
*
|
|
* Serial Presence Detect (SPD) EEPROM format according to the
|
|
* Intel's PC SDRAM Serial Presence Detect (SPD) Specification,
|
|
* revision 1.2B, November 1999
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef _SPD_H_
|
|
#define _SPD_H_
|
|
|
|
typedef struct spd_eeprom_s {
|
|
unsigned char info_size; /* # of bytes written into serial memory */
|
|
unsigned char chip_size; /* Total # of bytes of SPD memory device */
|
|
unsigned char mem_type; /* Fundamental memory type (FPM, EDO, SDRAM...) */
|
|
unsigned char nrow_addr; /* # of Row Addresses on this assembly */
|
|
unsigned char ncol_addr; /* # of Column Addresses on this assembly */
|
|
unsigned char nrows; /* # of Module Rows on this assembly */
|
|
unsigned char dataw_lsb; /* Data Width of this assembly */
|
|
unsigned char dataw_msb; /* ... Data Width continuation */
|
|
unsigned char voltage; /* Voltage interface standard of this assembly */
|
|
unsigned char clk_cycle; /* SDRAM Cycle time at CL=X */
|
|
unsigned char clk_access; /* SDRAM Access from Clock at CL=X */
|
|
unsigned char config; /* DIMM Configuration type (non-parity, ECC) */
|
|
unsigned char refresh; /* Refresh Rate/Type */
|
|
unsigned char primw; /* Primary SDRAM Width */
|
|
unsigned char ecw; /* Error Checking SDRAM width */
|
|
unsigned char min_delay; /* Min Clock Delay for Back to Back Random Address */
|
|
unsigned char burstl; /* Burst Lengths Supported */
|
|
unsigned char nbanks; /* # of Banks on Each SDRAM Device */
|
|
unsigned char cas_lat; /* CAS# Latencies Supported */
|
|
unsigned char cs_lat; /* CS# Latency */
|
|
unsigned char write_lat; /* Write Latency (also called Write Recovery time) */
|
|
unsigned char mod_attr; /* SDRAM Module Attributes */
|
|
unsigned char dev_attr; /* SDRAM Device Attributes */
|
|
unsigned char clk_cycle2; /* Min SDRAM Cycle time at CL=X-1 */
|
|
unsigned char clk_access2; /* SDRAM Access from Clock at CL=X-1 */
|
|
unsigned char clk_cycle3; /* Min SDRAM Cycle time at CL=X-2 */
|
|
unsigned char clk_access3; /* Max SDRAM Access from Clock at CL=X-2 */
|
|
unsigned char trp; /* Min Row Precharge Time (tRP) */
|
|
unsigned char trrd; /* Min Row Active to Row Active (tRRD) */
|
|
unsigned char trcd; /* Min RAS to CAS Delay (tRCD) */
|
|
unsigned char tras; /* Minimum RAS Pulse Width (tRAS) */
|
|
unsigned char row_dens; /* Density of each row on module */
|
|
unsigned char ca_setup; /* Command and Address signal input setup time */
|
|
unsigned char ca_hold; /* Command and Address signal input hold time */
|
|
unsigned char data_setup; /* Data signal input setup time */
|
|
unsigned char data_hold; /* Data signal input hold time */
|
|
unsigned char sset[26]; /* Superset Information (may be used in future) */
|
|
unsigned char spd_rev; /* SPD Data Revision Code */
|
|
unsigned char cksum; /* Checksum for bytes 0-62 */
|
|
unsigned char mid[8]; /* Manufacturer's JEDEC ID code per JEP-108E */
|
|
unsigned char mloc; /* Manufacturing Location */
|
|
unsigned char mpart[18]; /* Manufacturer's Part Number */
|
|
unsigned char rev[2]; /* Revision Code */
|
|
unsigned char mdate[2]; /* Manufacturing Date */
|
|
unsigned char sernum[4]; /* Assembly Serial Number */
|
|
unsigned char mspec[27]; /* Manufacturer Specific Data */
|
|
unsigned char freq; /* Intel specification frequency */
|
|
unsigned char intel_cas; /* Intel Specification CAS# Latency support */
|
|
} spd_eeprom_t;
|
|
|
|
#endif /* _SPD_H_ */
|