mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
ce2896a8a0
Remove the legacy way of enabling GPIO, SPI and UART on Vybrid based boards since these driver's now only supports DT mode. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
263 lines
7.6 KiB
C
263 lines
7.6 KiB
C
/*
|
|
* Copyright 2015 Toradex, Inc.
|
|
*
|
|
* Configuration settings for the Toradex VF50/VF61 module.
|
|
*
|
|
* Based on vf610twr.h:
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONFIG_VF610
|
|
#define CONFIG_SYS_THUMB_BUILD
|
|
#define CONFIG_USE_ARCH_MEMCPY
|
|
#define CONFIG_USE_ARCH_MEMSET
|
|
#define CONFIG_SYS_FSL_CLK
|
|
|
|
#define CONFIG_ARCH_MISC_INIT
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
#define CONFIG_CMD_FUSE
|
|
#ifdef CONFIG_CMD_FUSE
|
|
#define CONFIG_MXC_OCOTP
|
|
#endif
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
/* Allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
#define CONFIG_VERSION_VARIABLE
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_CMD_ASKENV
|
|
|
|
/* NAND support */
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
|
|
|
|
/* Dynamic MTD partition support */
|
|
#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
#define MTDIDS_DEFAULT "nand0=vf610_nfc"
|
|
#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
|
|
"128k(vf-bcb)ro," \
|
|
"1408k(u-boot)ro," \
|
|
"512k(u-boot-env)," \
|
|
"-(ubi)"
|
|
|
|
#define CONFIG_MMC
|
|
#define CONFIG_FSL_ESDHC
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
|
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
|
|
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_EXT3
|
|
#define CONFIG_CMD_EXT4
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
#define CONFIG_CMD_FS_GENERIC
|
|
#define CONFIG_CMD_BOOTZ
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_MTD_UBI_FASTMAP
|
|
#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_MII
|
|
#define IMX_FEC_BASE ENET1_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RMII
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_MICREL
|
|
|
|
#define CONFIG_IPADDR 192.168.10.2
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_SERVERIP 192.168.10.1
|
|
|
|
#define CONFIG_BOOTDELAY 1
|
|
#define CONFIG_BOARD_LATE_INIT
|
|
|
|
#define CONFIG_LOADADDR 0x80008000
|
|
#define CONFIG_FDTADDR 0x84000000
|
|
|
|
/* We boot from the gfxRAM area of the OCRAM. */
|
|
#define CONFIG_SYS_TEXT_BASE 0x3f408000
|
|
#define CONFIG_BOARD_SIZE_LIMIT 524288
|
|
|
|
#define SD_BOOTCMD \
|
|
"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
|
|
"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
|
|
"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
|
|
"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
|
|
"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
|
|
"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
|
|
|
#define NFS_BOOTCMD \
|
|
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
|
|
"nfsboot=run setup; " \
|
|
"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
|
|
"${setupargs} ${vidargs}; echo Booting from NFS...;" \
|
|
"dhcp ${kernel_addr_r} && " \
|
|
"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
|
|
"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
|
|
|
#define UBI_BOOTCMD \
|
|
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
|
|
"ubi.fm_autoconvert=1\0" \
|
|
"ubiboot=run setup; " \
|
|
"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
|
|
"${setupargs} ${vidargs}; echo Booting from NAND...; " \
|
|
"ubi part ubi && ubifsmount ubi0:rootfs && " \
|
|
"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
|
|
"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
|
|
"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
|
|
|
|
#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"kernel_addr_r=0x82000000\0" \
|
|
"fdt_addr_r=0x84000000\0" \
|
|
"kernel_file=zImage\0" \
|
|
"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
|
|
"fdt_board=eval-v3\0" \
|
|
"defargs=\0" \
|
|
"console=ttyLP0\0" \
|
|
"setup=setenv setupargs " \
|
|
"console=tty1 console=${console}" \
|
|
",${baudrate}n8 ${memargs}\0" \
|
|
"setsdupdate=mmc rescan && set interface mmc && " \
|
|
"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
|
|
"source ${loadaddr}\0" \
|
|
"setusbupdate=usb start && set interface usb && " \
|
|
"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
|
|
"source ${loadaddr}\0" \
|
|
"setupdate=run setsdupdate || run setusbupdate\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
|
|
SD_BOOTCMD \
|
|
NFS_BOOTCMD \
|
|
UBI_BOOTCMD
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#undef CONFIG_AUTO_COMPLETE
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
#define CONFIG_CMD_MEMTEST
|
|
#define CONFIG_SYS_MEMTEST_START 0x80010000
|
|
#define CONFIG_SYS_MEMTEST_END 0x87C00000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
#define CONFIG_SYS_HZ 1000
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
/*
|
|
* Stack sizes
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
|
|
|
|
/* Physical memory map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM (0x80000000)
|
|
#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Environment organization */
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
|
|
#define CONFIG_ENV_SIZE (8 * 1024)
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_SIZE (64 * 2048)
|
|
#define CONFIG_ENV_RANGE (4 * 64 * 2048)
|
|
#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
|
|
#endif
|
|
|
|
#define CONFIG_OF_LIBFDT
|
|
#define CONFIG_CMD_BOOTZ
|
|
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
/* USB Host Support */
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_USB_EHCI_VF
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
|
|
/* USB Client Support */
|
|
#define CONFIG_USB_GADGET
|
|
#define CONFIG_CI_UDC
|
|
#define CONFIG_USB_GADGET_DUALSPEED
|
|
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
|
#define CONFIG_TRDX_VID 0x1B67
|
|
#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
|
|
#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
|
|
#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
|
|
#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
|
|
#define CONFIG_G_DNL_MANUFACTURER "Toradex"
|
|
#define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID
|
|
#define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50
|
|
|
|
/* USB DFU */
|
|
#define CONFIG_USB_GADGET_DOWNLOAD
|
|
#define CONFIG_CMD_DFU
|
|
#define CONFIG_USB_FUNCTION_DFU
|
|
#define CONFIG_DFU_NAND
|
|
#define CONFIG_DFU_MMC
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
|
|
|
|
/* USB Storage */
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
|
#define CONFIG_CMD_USB_MASS_STORAGE
|
|
|
|
#endif /* __CONFIG_H */
|