mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 07:31:15 +00:00
321d153238
We are facing issues in the driver since SPI NOR framework has moved on SPI MEM framework, and SPI NAND framework is not running properly with the current driver. To be able to solve issues met on SPI NOR Flashes and to be able to support SPI NAND Flashes, the driver has been reworked. We are now using exec_op ops instead of using xfer ops. Thanks to this rework, the driver has been successfully tested with: - mx66l51235l SPI NOR Flash on stm32f746 SOC - n25q128a SPI NOR Flash on stm32f769 SOC - mx66l51235l SPI NOR Flash on stm32mp1 SOC - mt29f2g01abagd SPI NAND Flash on stm32mp1 SOC Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Tested-by: Patrick DELAUNAY <patrick.delaunay@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com>
390 lines
11 KiB
Text
390 lines
11 KiB
Text
menuconfig SPI
|
|
bool "SPI Support"
|
|
|
|
if SPI
|
|
|
|
config DM_SPI
|
|
bool "Enable Driver Model for SPI drivers"
|
|
depends on DM
|
|
help
|
|
Enable driver model for SPI. The SPI slave interface
|
|
(spi_setup_slave(), spi_xfer(), etc.) is then implemented by
|
|
the SPI uclass. Drivers provide methods to access the SPI
|
|
buses that they control. The uclass interface is defined in
|
|
include/spi.h. The existing spi_slave structure is attached
|
|
as 'parent data' to every slave on each bus. Slaves
|
|
typically use driver-private data instead of extending the
|
|
spi_slave structure.
|
|
|
|
config SPI_MEM
|
|
bool "SPI memory extension"
|
|
help
|
|
Enable this option if you want to enable the SPI memory extension.
|
|
This extension is meant to simplify interaction with SPI memories
|
|
by providing an high-level interface to send memory-like commands.
|
|
|
|
if DM_SPI
|
|
|
|
config ALTERA_SPI
|
|
bool "Altera SPI driver"
|
|
help
|
|
Enable the Altera SPI driver. This driver can be used to
|
|
access the SPI NOR flash on platforms embedding this Altera
|
|
IP core. Please find details on the "Embedded Peripherals IP
|
|
User Guide" of Altera.
|
|
|
|
config ATCSPI200_SPI
|
|
bool "Andestech ATCSPI200 SPI driver"
|
|
help
|
|
Enable the Andestech ATCSPI200 SPI driver. This driver can be
|
|
used to access the SPI flash on AE3XX and AE250 platforms embedding
|
|
this Andestech IP core.
|
|
|
|
config ATH79_SPI
|
|
bool "Atheros SPI driver"
|
|
depends on ARCH_ATH79
|
|
help
|
|
Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used
|
|
to access SPI NOR flash and other SPI peripherals. This driver
|
|
uses driver model and requires a device tree binding to operate.
|
|
please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
|
|
|
|
config ATMEL_SPI
|
|
bool "Atmel SPI driver"
|
|
default y if ARCH_AT91
|
|
help
|
|
This enables driver for the Atmel SPI Controller, present on
|
|
many AT91 (ARM) chips. This driver can be used to access
|
|
the SPI Flash, such as AT25DF321.
|
|
|
|
config BCM63XX_HSSPI
|
|
bool "BCM63XX HSSPI driver"
|
|
depends on ARCH_BMIPS
|
|
help
|
|
Enable the BCM6328 HSSPI driver. This driver can be used to
|
|
access the SPI NOR flash on platforms embedding this Broadcom
|
|
SPI core.
|
|
|
|
config BCM63XX_SPI
|
|
bool "BCM6348 SPI driver"
|
|
depends on ARCH_BMIPS
|
|
help
|
|
Enable the BCM6348/BCM6358 SPI driver. This driver can be used to
|
|
access the SPI NOR flash on platforms embedding these Broadcom
|
|
SPI cores.
|
|
|
|
config BCMSTB_SPI
|
|
bool "BCMSTB SPI driver"
|
|
help
|
|
Enable the Broadcom set-top box SPI driver. This driver can
|
|
be used to access the SPI flash on platforms embedding this
|
|
Broadcom SPI core.
|
|
|
|
config CADENCE_QSPI
|
|
bool "Cadence QSPI driver"
|
|
help
|
|
Enable the Cadence Quad-SPI (QSPI) driver. This driver can be
|
|
used to access the SPI NOR flash on platforms embedding this
|
|
Cadence IP core.
|
|
|
|
config DESIGNWARE_SPI
|
|
bool "Designware SPI driver"
|
|
help
|
|
Enable the Designware SPI driver. This driver can be used to
|
|
access the SPI NOR flash on platforms embedding this Designware
|
|
IP core.
|
|
|
|
config EXYNOS_SPI
|
|
bool "Samsung Exynos SPI driver"
|
|
help
|
|
Enable the Samsung Exynos SPI driver. This driver can be used to
|
|
access the SPI NOR flash on platforms embedding this Samsung
|
|
Exynos IP core.
|
|
|
|
config FSL_DSPI
|
|
bool "Freescale DSPI driver"
|
|
help
|
|
Enable the Freescale DSPI driver. This driver can be used to
|
|
access the SPI NOR flash and SPI Data flash on platforms embedding
|
|
this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
|
|
use this driver.
|
|
|
|
config ICH_SPI
|
|
bool "Intel ICH SPI driver"
|
|
imply SPI_FLASH_BAR
|
|
help
|
|
Enable the Intel ICH SPI driver. This driver can be used to
|
|
access the SPI NOR flash on platforms embedding this Intel
|
|
ICH IP core.
|
|
|
|
config MESON_SPIFC
|
|
bool "Amlogic Meson SPI Flash Controller driver"
|
|
depends on ARCH_MESON
|
|
help
|
|
Enable the Amlogic Meson SPI Flash Controller SPIFC) driver.
|
|
This driver can be used to access the SPI NOR flash chips on
|
|
Amlogic Meson SoCs.
|
|
|
|
config MPC8XX_SPI
|
|
bool "MPC8XX SPI Driver"
|
|
depends on MPC8xx
|
|
help
|
|
Enable support for SPI on MPC8XX
|
|
|
|
config MT7621_SPI
|
|
bool "MediaTek MT7621 SPI driver"
|
|
depends on ARCH_MT7620
|
|
help
|
|
Enable the MT7621 SPI driver. This driver can be used to access
|
|
the SPI NOR flash on platforms embedding this Ralink / MediaTek
|
|
SPI core, like MT7621/7628/7688.
|
|
|
|
config MTK_QSPI
|
|
bool "Mediatek QSPI driver"
|
|
imply SPI_FLASH_BAR
|
|
help
|
|
Enable the Mediatek QSPI driver. This driver can be
|
|
used to access the SPI NOR flash on platforms embedding this
|
|
Mediatek QSPI IP core.
|
|
|
|
config MVEBU_A3700_SPI
|
|
bool "Marvell Armada 3700 SPI driver"
|
|
select CLK_ARMADA_3720
|
|
help
|
|
Enable the Marvell Armada 3700 SPI driver. This driver can be
|
|
used to access the SPI NOR flash on platforms embedding this
|
|
Marvell IP core.
|
|
|
|
config PIC32_SPI
|
|
bool "Microchip PIC32 SPI driver"
|
|
depends on MACH_PIC32
|
|
help
|
|
Enable the Microchip PIC32 SPI driver. This driver can be used
|
|
to access the SPI NOR flash, MMC-over-SPI on platforms based on
|
|
Microchip PIC32 family devices.
|
|
|
|
config PL022_SPI
|
|
bool "ARM AMBA PL022 SSP controller driver"
|
|
depends on ARM
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
|
|
controller. If you have an embedded system with an AMBA(R)
|
|
bus and a PL022 controller, say Y or M here.
|
|
|
|
config RENESAS_RPC_SPI
|
|
bool "Renesas RPC SPI driver"
|
|
depends on RCAR_GEN3
|
|
imply SPI_FLASH_BAR
|
|
help
|
|
Enable the Renesas RPC SPI driver, used to access SPI NOR flash
|
|
on Renesas RCar Gen3 SoCs. This uses driver model and requires a
|
|
device tree binding to operate.
|
|
|
|
config ROCKCHIP_SPI
|
|
bool "Rockchip SPI driver"
|
|
help
|
|
Enable the Rockchip SPI driver, used to access SPI NOR flash and
|
|
other SPI peripherals (such as the Chrome OS EC) on Rockchip SoCs.
|
|
This uses driver model and requires a device tree binding to
|
|
operate.
|
|
|
|
config SANDBOX_SPI
|
|
bool "Sandbox SPI driver"
|
|
depends on SANDBOX && DM
|
|
help
|
|
Enable SPI support for sandbox. This is an emulation of a real SPI
|
|
bus. Devices can be attached to the bus using the device tree
|
|
which specifies the driver to use. As an example, see this device
|
|
tree fragment from sandbox.dts. It shows that the SPI bus has a
|
|
single flash device on chip select 0 which is emulated by the driver
|
|
for "sandbox,spi-flash", which is in drivers/mtd/spi/sandbox.c.
|
|
|
|
spi@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
compatible = "sandbox,spi";
|
|
cs-gpios = <0>, <&gpio_a 0>;
|
|
flash@0 {
|
|
reg = <0>;
|
|
compatible = "spansion,m25p16", "sandbox,spi-flash";
|
|
spi-max-frequency = <40000000>;
|
|
sandbox,filename = "spi.bin";
|
|
};
|
|
};
|
|
|
|
config SPI_SUNXI
|
|
bool "Allwinner SoC SPI controllers"
|
|
help
|
|
Enable the Allwinner SoC SPi controller driver.
|
|
|
|
Same controller driver can reuse in all Allwinner SoC variants.
|
|
|
|
config STM32_QSPI
|
|
bool "STM32F7 QSPI driver"
|
|
depends on STM32F7 || ARCH_STM32MP
|
|
help
|
|
Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
|
|
used to access the SPI NOR flash chips on platforms embedding
|
|
this ST IP core.
|
|
|
|
config TEGRA114_SPI
|
|
bool "nVidia Tegra114 SPI driver"
|
|
help
|
|
Enable the nVidia Tegra114 SPI driver. This driver can be used to
|
|
access the SPI NOR flash on platforms embedding this nVidia Tegra114
|
|
IP core.
|
|
|
|
This controller is different than the older SoCs SPI controller and
|
|
also register interface get changed with this controller.
|
|
|
|
config TEGRA20_SFLASH
|
|
bool "nVidia Tegra20 Serial Flash controller driver"
|
|
help
|
|
Enable the nVidia Tegra20 Serial Flash controller driver. This driver
|
|
can be used to access the SPI NOR flash on platforms embedding this
|
|
nVidia Tegra20 IP core.
|
|
|
|
config TEGRA20_SLINK
|
|
bool "nVidia Tegra20/Tegra30 SLINK driver"
|
|
help
|
|
Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can
|
|
be used to access the SPI NOR flash on platforms embedding this
|
|
nVidia Tegra20/Tegra30 IP cores.
|
|
|
|
config TEGRA210_QSPI
|
|
bool "nVidia Tegra210 QSPI driver"
|
|
help
|
|
Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver
|
|
be used to access SPI chips on platforms embedding this
|
|
NVIDIA Tegra210 IP core.
|
|
|
|
config XILINX_SPI
|
|
bool "Xilinx SPI driver"
|
|
help
|
|
Enable the Xilinx SPI driver from the Xilinx EDK. This SPI
|
|
controller support 8 bit SPI transfers only, with or w/o FIFO.
|
|
For more info on Xilinx SPI Register Definitions and Overview
|
|
see driver file - drivers/spi/xilinx_spi.c
|
|
|
|
config ZYNQ_SPI
|
|
bool "Zynq SPI driver"
|
|
depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
|
|
help
|
|
Enable the Zynq SPI driver. This driver can be used to
|
|
access the SPI NOR flash on platforms embedding this Zynq
|
|
SPI IP core.
|
|
|
|
config ZYNQ_QSPI
|
|
bool "Zynq QSPI driver"
|
|
depends on ARCH_ZYNQ
|
|
imply SPI_FLASH_BAR
|
|
help
|
|
Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
|
|
used to access the SPI NOR flash on platforms embedding this
|
|
Zynq QSPI IP core. This IP is used to connect the flash in
|
|
4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
|
|
|
|
config ZYNQMP_GQSPI
|
|
bool "Configure ZynqMP Generic QSPI"
|
|
depends on ARCH_ZYNQMP || ARCH_VERSAL
|
|
help
|
|
This option is used to enable ZynqMP QSPI controller driver which
|
|
is used to communicate with qspi flash devices.
|
|
|
|
endif # if DM_SPI
|
|
|
|
config SOFT_SPI
|
|
bool "Soft SPI driver"
|
|
help
|
|
Enable Soft SPI driver. This driver is to use GPIO simulate
|
|
the SPI protocol.
|
|
|
|
config MSCC_BB_SPI
|
|
bool "MSCC bitbang SPI driver"
|
|
depends on SOC_VCOREIII
|
|
help
|
|
Enable MSCC bitbang SPI driver. This driver can be used on
|
|
MSCC SOCs.
|
|
|
|
config CF_SPI
|
|
bool "ColdFire SPI driver"
|
|
help
|
|
Enable the ColdFire SPI driver. This driver can be used on
|
|
some m68k SoCs.
|
|
|
|
config FSL_ESPI
|
|
bool "Freescale eSPI driver"
|
|
help
|
|
Enable the Freescale eSPI driver. This driver can be used to
|
|
access the SPI interface and SPI NOR flash on platforms embedding
|
|
this Freescale eSPI IP core.
|
|
|
|
config FSL_QSPI
|
|
bool "Freescale QSPI driver"
|
|
imply SPI_FLASH_BAR
|
|
help
|
|
Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
|
|
used to access the SPI NOR flash on platforms embedding this
|
|
Freescale IP core.
|
|
|
|
config DAVINCI_SPI
|
|
bool "Davinci & Keystone SPI driver"
|
|
depends on ARCH_DAVINCI || ARCH_KEYSTONE
|
|
help
|
|
Enable the Davinci SPI driver
|
|
|
|
config SH_SPI
|
|
bool "SuperH SPI driver"
|
|
help
|
|
Enable the SuperH SPI controller driver. This driver can be used
|
|
on various SuperH SoCs, such as SH7757.
|
|
|
|
config SH_QSPI
|
|
bool "Renesas Quad SPI driver"
|
|
help
|
|
Enable the Renesas Quad SPI controller driver. This driver can be
|
|
used on Renesas SoCs.
|
|
|
|
config TI_QSPI
|
|
bool "TI QSPI driver"
|
|
help
|
|
Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
|
|
This driver support spi flash single, quad and memory reads.
|
|
|
|
config KIRKWOOD_SPI
|
|
bool "Marvell Kirkwood SPI Driver"
|
|
help
|
|
Enable support for SPI on various Marvell SoCs, such as
|
|
Kirkwood and Armada 375.
|
|
|
|
config LPC32XX_SSP
|
|
bool "LPC32XX SPI Driver"
|
|
help
|
|
Enable support for SPI on LPC32xx
|
|
|
|
config MPC8XXX_SPI
|
|
bool "MPC8XXX SPI Driver"
|
|
help
|
|
Enable support for SPI on the MPC8XXX PowerPC SoCs.
|
|
|
|
config MXC_SPI
|
|
bool "MXC SPI Driver"
|
|
help
|
|
Enable the MXC SPI controller driver. This driver can be used
|
|
on various i.MX SoCs such as i.MX31/35/51/6/7.
|
|
|
|
config MXS_SPI
|
|
bool "MXS SPI Driver"
|
|
help
|
|
Enable the MXS SPI controller driver. This driver can be used
|
|
on the i.MX23 and i.MX28 SoCs.
|
|
|
|
config OMAP3_SPI
|
|
bool "McSPI driver for OMAP"
|
|
help
|
|
SPI master controller for OMAP24XX and later Multichannel SPI
|
|
(McSPI). This driver be used to access SPI chips on platforms
|
|
embedding this OMAP3 McSPI IP core.
|
|
|
|
endif # menu "SPI Support"
|