mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
150 lines
6 KiB
C
150 lines
6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* mcf5249.h -- Definitions for Motorola Coldfire 5249
|
|
*
|
|
* Based on mcf5272sim.h of uCLinux distribution:
|
|
* (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
|
|
* (C) Copyright 2000, Lineo Inc. (www.lineo.com)
|
|
*/
|
|
|
|
#ifndef mcf5249_h
|
|
#define mcf5249_h
|
|
/****************************************************************************/
|
|
|
|
/*
|
|
* useful definitions for reading/writing MBAR offset memory
|
|
*/
|
|
#define mbar_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x))
|
|
#define mbar_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) = y
|
|
#define mbar_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR + x)) = y
|
|
#define mbar_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR + x)) = y
|
|
#define mbar2_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x))
|
|
#define mbar2_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x)) = y
|
|
#define mbar2_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR2 + x)) = y
|
|
#define mbar2_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR2 + x)) = y
|
|
|
|
/*
|
|
* Size of internal RAM
|
|
*/
|
|
|
|
#define INT_RAM_SIZE 32768 /* RAMBAR0 - 32k */
|
|
#define INT_RAM_SIZE2 65536 /* RAMBAR1 - 64k */
|
|
|
|
/*
|
|
* Define the 5249 SIM register set addresses.
|
|
*/
|
|
|
|
/*****************
|
|
***** MBAR1 *****
|
|
*****************/
|
|
#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
|
|
#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w) */
|
|
#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
|
|
#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
|
|
#define MCFSIM_MPARK 0x0c /* Bus master park register (r/w) */
|
|
|
|
#define MCFSIM_SIMR 0x00 /* SIM Config reg (r/w) */
|
|
#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
|
|
#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
|
|
#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
|
|
#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
|
|
#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
|
|
#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
|
|
#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
|
|
#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
|
|
#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
|
|
#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
|
|
#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
|
|
#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
|
|
|
|
#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
|
|
#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
|
|
|
|
#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */
|
|
#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */
|
|
#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */
|
|
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
|
|
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
|
|
|
|
/*****************
|
|
***** MBAR2 *****
|
|
*****************/
|
|
|
|
/* GPIO Addresses
|
|
* Note: These are offset from MBAR2!
|
|
*/
|
|
#define MCFSIM_GPIO_READ 0x00 /* Read-Only access to gpio 0-31 (MBAR2) (r) */
|
|
#define MCFSIM_GPIO_OUT 0x04 /* Output register for gpio 0-31 (MBAR2) (r/w) */
|
|
#define MCFSIM_GPIO_EN 0x08 /* gpio 0-31 enable (r/w) */
|
|
#define MCFSIM_GPIO_FUNC 0x0c /* gpio 0-31 function select (r/w) */
|
|
#define MCFSIM_GPIO1_READ 0xb0 /* Read-Only access to gpio 32-63 (MBAR2) (r) */
|
|
#define MCFSIM_GPIO1_OUT 0xb4 /* Output register for gpio 32-63 (MBAR2) (r/w) */
|
|
#define MCFSIM_GPIO1_EN 0xb8 /* gpio 32-63 enable (r/w) */
|
|
#define MCFSIM_GPIO1_FUNC 0xbc /* gpio 32-63 function select (r/w) */
|
|
|
|
#define MCFSIM_GPIO_INT_STAT 0xc0 /* Secondary Interrupt status (r) */
|
|
#define MCFSIM_GPIO_INT_CLEAR 0xc0 /* Secondary Interrupt status (w) */
|
|
#define MCFSIM_GPIO_INT_EN 0xc4 /* Secondary Interrupt status (r/w) */
|
|
|
|
#define MCFSIM_INT_STAT3 0xe0 /* 3rd Interrupt ctrl status (r) */
|
|
#define MCFSIM_INT_CLEAR3 0xe0 /* 3rd Interrupt ctrl clear (w) */
|
|
#define MCFSIM_INT_EN3 0xe4 /* 3rd Interrupt ctrl enable (r/w) */
|
|
|
|
#define MCFSIM_INTLEV1 0x140 /* Interrupts 0 - 7 (r/w) */
|
|
#define MCFSIM_INTLEV2 0x144 /* Interrupts 8 -15 (r/w) */
|
|
#define MCFSIM_INTLEV3 0x148 /* Interrupts 16-23 (r/w) */
|
|
#define MCFSIM_INTLEV4 0x14c /* Interrupts 24-31 (r/w) */
|
|
#define MCFSIM_INTLEV5 0x150 /* Interrupts 32-39 (r/w) */
|
|
#define MCFSIM_INTLEV6 0x154 /* Interrupts 40-47 (r/w) */
|
|
#define MCFSIM_INTLEV7 0x158 /* Interrupts 48-55 (r/w) */
|
|
#define MCFSIM_INTLEV8 0x15c /* Interrupts 56-63 (r/w) */
|
|
|
|
#define MCFSIM_SPURVEC 0x167 /* Spurious Vector Register (r/w) */
|
|
#define MCFSIM_INTBASE 0x16b /* Software interrupt base address (r/w) */
|
|
|
|
#define MCFSIM_IDECONFIG1 0x18c /* IDE config register 1 (r/w) */
|
|
#define MCFSIM_IDECONFIG2 0x190 /* IDE config register 1 (r/w) */
|
|
|
|
#define MCFSIM_PLLCR 0x180 /* PLL Control register */
|
|
|
|
/*
|
|
* Some symbol defines for the above...
|
|
*/
|
|
#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
|
|
#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
|
|
#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
|
|
#define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */
|
|
#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
|
|
#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
|
|
/* XXX - If needed, DMA ICRs go here */
|
|
#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */
|
|
|
|
/*
|
|
* Bit definitions for the ICR family of registers.
|
|
*/
|
|
#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
|
|
#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
|
|
#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
|
|
#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
|
|
#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
|
|
#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
|
|
#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
|
|
#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
|
|
#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
|
|
|
|
#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
|
|
#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
|
|
#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
|
|
#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
|
|
|
|
/*
|
|
* Macros to read/set IMR register. It is 32 bits on the 5249.
|
|
*/
|
|
|
|
#define mcf_getimr() \
|
|
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
|
|
|
|
#define mcf_setimr(imr) \
|
|
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
|
|
|
|
#endif /* mcf5249_h */
|