mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
1fd92db83d
Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
366 lines
11 KiB
C
366 lines
11 KiB
C
/*
|
|
* Xilinx xps_ll_temac ethernet driver for u-boot
|
|
*
|
|
* SDMA sub-controller
|
|
*
|
|
* Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net>
|
|
* Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu>
|
|
* Copyright (C) 2008 - 2011 PetaLogix
|
|
*
|
|
* Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver
|
|
* Copyright (C) 2008 Nissin Systems Co.,Ltd.
|
|
* March 2008 created
|
|
*
|
|
* CREDITS: tsec driver
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* [0]: http://www.xilinx.com/support/documentation
|
|
*
|
|
* [M]: [0]/ip_documentation/mpmc.pdf
|
|
* [S]: [0]/ip_documentation/xps_ll_temac.pdf
|
|
* [A]: [0]/application_notes/xapp1041.pdf
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <net.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "xilinx_ll_temac.h"
|
|
#include "xilinx_ll_temac_sdma.h"
|
|
|
|
#define TX_BUF_CNT 2
|
|
|
|
static unsigned int rx_idx; /* index of the current RX buffer */
|
|
static unsigned int tx_idx; /* index of the current TX buffer */
|
|
|
|
struct rtx_cdmac_bd {
|
|
struct cdmac_bd rx[PKTBUFSRX];
|
|
struct cdmac_bd tx[TX_BUF_CNT];
|
|
};
|
|
|
|
/*
|
|
* DMA Buffer Descriptor alignment
|
|
*
|
|
* If the address contained in the Next Descriptor Pointer register is not
|
|
* 8-word aligned or reaches beyond the range of available memory, the SDMA
|
|
* halts processing and sets the CDMAC_BD_STCTRL_ERROR bit in the respective
|
|
* status register (tx_chnl_sts or rx_chnl_sts).
|
|
*
|
|
* [1]: [0]/ip_documentation/mpmc.pdf
|
|
* page 161, Next Descriptor Pointer
|
|
*/
|
|
static struct rtx_cdmac_bd cdmac_bd __aligned(32);
|
|
|
|
#if defined(CONFIG_XILINX_440) || defined(CONFIG_XILINX_405)
|
|
|
|
/*
|
|
* Indirect DCR access operations mi{ft}dcr_xilinx() espacialy
|
|
* for Xilinx PowerPC implementations on FPGA.
|
|
*
|
|
* FIXME: This part should go up to arch/powerpc -- but where?
|
|
*/
|
|
#include <asm/processor.h>
|
|
#define XILINX_INDIRECT_DCR_ADDRESS_REG 0
|
|
#define XILINX_INDIRECT_DCR_ACCESS_REG 1
|
|
inline unsigned mifdcr_xilinx(const unsigned dcrn)
|
|
{
|
|
mtdcr(XILINX_INDIRECT_DCR_ADDRESS_REG, dcrn);
|
|
return mfdcr(XILINX_INDIRECT_DCR_ACCESS_REG);
|
|
}
|
|
inline void mitdcr_xilinx(const unsigned dcrn, int val)
|
|
{
|
|
mtdcr(XILINX_INDIRECT_DCR_ADDRESS_REG, dcrn);
|
|
mtdcr(XILINX_INDIRECT_DCR_ACCESS_REG, val);
|
|
}
|
|
|
|
/* Xilinx Device Control Register (DCR) in/out accessors */
|
|
inline unsigned ll_temac_xldcr_in32(phys_addr_t addr)
|
|
{
|
|
return mifdcr_xilinx((const unsigned)addr);
|
|
}
|
|
inline void ll_temac_xldcr_out32(phys_addr_t addr, unsigned value)
|
|
{
|
|
mitdcr_xilinx((const unsigned)addr, value);
|
|
}
|
|
|
|
void ll_temac_collect_xldcr_sdma_reg_addr(struct eth_device *dev)
|
|
{
|
|
struct ll_temac *ll_temac = dev->priv;
|
|
phys_addr_t dmac_ctrl = ll_temac->ctrladdr;
|
|
phys_addr_t *ra = ll_temac->sdma_reg_addr;
|
|
|
|
ra[TX_NXTDESC_PTR] = dmac_ctrl + TX_NXTDESC_PTR;
|
|
ra[TX_CURBUF_ADDR] = dmac_ctrl + TX_CURBUF_ADDR;
|
|
ra[TX_CURBUF_LENGTH] = dmac_ctrl + TX_CURBUF_LENGTH;
|
|
ra[TX_CURDESC_PTR] = dmac_ctrl + TX_CURDESC_PTR;
|
|
ra[TX_TAILDESC_PTR] = dmac_ctrl + TX_TAILDESC_PTR;
|
|
ra[TX_CHNL_CTRL] = dmac_ctrl + TX_CHNL_CTRL;
|
|
ra[TX_IRQ_REG] = dmac_ctrl + TX_IRQ_REG;
|
|
ra[TX_CHNL_STS] = dmac_ctrl + TX_CHNL_STS;
|
|
ra[RX_NXTDESC_PTR] = dmac_ctrl + RX_NXTDESC_PTR;
|
|
ra[RX_CURBUF_ADDR] = dmac_ctrl + RX_CURBUF_ADDR;
|
|
ra[RX_CURBUF_LENGTH] = dmac_ctrl + RX_CURBUF_LENGTH;
|
|
ra[RX_CURDESC_PTR] = dmac_ctrl + RX_CURDESC_PTR;
|
|
ra[RX_TAILDESC_PTR] = dmac_ctrl + RX_TAILDESC_PTR;
|
|
ra[RX_CHNL_CTRL] = dmac_ctrl + RX_CHNL_CTRL;
|
|
ra[RX_IRQ_REG] = dmac_ctrl + RX_IRQ_REG;
|
|
ra[RX_CHNL_STS] = dmac_ctrl + RX_CHNL_STS;
|
|
ra[DMA_CONTROL_REG] = dmac_ctrl + DMA_CONTROL_REG;
|
|
}
|
|
|
|
#endif /* CONFIG_XILINX_440 || ONFIG_XILINX_405 */
|
|
|
|
/* Xilinx Processor Local Bus (PLB) in/out accessors */
|
|
inline unsigned ll_temac_xlplb_in32(phys_addr_t addr)
|
|
{
|
|
return in_be32((void *)addr);
|
|
}
|
|
inline void ll_temac_xlplb_out32(phys_addr_t addr, unsigned value)
|
|
{
|
|
out_be32((void *)addr, value);
|
|
}
|
|
|
|
/* collect all register addresses for Xilinx PLB in/out accessors */
|
|
void ll_temac_collect_xlplb_sdma_reg_addr(struct eth_device *dev)
|
|
{
|
|
struct ll_temac *ll_temac = dev->priv;
|
|
struct sdma_ctrl *sdma_ctrl = (void *)ll_temac->ctrladdr;
|
|
phys_addr_t *ra = ll_temac->sdma_reg_addr;
|
|
|
|
ra[TX_NXTDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_nxtdesc_ptr;
|
|
ra[TX_CURBUF_ADDR] = (phys_addr_t)&sdma_ctrl->tx_curbuf_addr;
|
|
ra[TX_CURBUF_LENGTH] = (phys_addr_t)&sdma_ctrl->tx_curbuf_length;
|
|
ra[TX_CURDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_curdesc_ptr;
|
|
ra[TX_TAILDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_taildesc_ptr;
|
|
ra[TX_CHNL_CTRL] = (phys_addr_t)&sdma_ctrl->tx_chnl_ctrl;
|
|
ra[TX_IRQ_REG] = (phys_addr_t)&sdma_ctrl->tx_irq_reg;
|
|
ra[TX_CHNL_STS] = (phys_addr_t)&sdma_ctrl->tx_chnl_sts;
|
|
ra[RX_NXTDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_nxtdesc_ptr;
|
|
ra[RX_CURBUF_ADDR] = (phys_addr_t)&sdma_ctrl->rx_curbuf_addr;
|
|
ra[RX_CURBUF_LENGTH] = (phys_addr_t)&sdma_ctrl->rx_curbuf_length;
|
|
ra[RX_CURDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_curdesc_ptr;
|
|
ra[RX_TAILDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_taildesc_ptr;
|
|
ra[RX_CHNL_CTRL] = (phys_addr_t)&sdma_ctrl->rx_chnl_ctrl;
|
|
ra[RX_IRQ_REG] = (phys_addr_t)&sdma_ctrl->rx_irq_reg;
|
|
ra[RX_CHNL_STS] = (phys_addr_t)&sdma_ctrl->rx_chnl_sts;
|
|
ra[DMA_CONTROL_REG] = (phys_addr_t)&sdma_ctrl->dma_control_reg;
|
|
}
|
|
|
|
/* Check for TX and RX channel errors. */
|
|
static inline int ll_temac_sdma_error(struct eth_device *dev)
|
|
{
|
|
int err;
|
|
struct ll_temac *ll_temac = dev->priv;
|
|
phys_addr_t *ra = ll_temac->sdma_reg_addr;
|
|
|
|
err = ll_temac->in32(ra[TX_CHNL_STS]) & CHNL_STS_ERROR;
|
|
err |= ll_temac->in32(ra[RX_CHNL_STS]) & CHNL_STS_ERROR;
|
|
|
|
return err;
|
|
}
|
|
|
|
int ll_temac_init_sdma(struct eth_device *dev)
|
|
{
|
|
struct ll_temac *ll_temac = dev->priv;
|
|
struct cdmac_bd *rx_dp;
|
|
struct cdmac_bd *tx_dp;
|
|
phys_addr_t *ra = ll_temac->sdma_reg_addr;
|
|
int i;
|
|
|
|
printf("%s: SDMA: %d Rx buffers, %d Tx buffers\n",
|
|
dev->name, PKTBUFSRX, TX_BUF_CNT);
|
|
|
|
/* Initialize the Rx Buffer descriptors */
|
|
for (i = 0; i < PKTBUFSRX; i++) {
|
|
rx_dp = &cdmac_bd.rx[i];
|
|
memset(rx_dp, 0, sizeof(*rx_dp));
|
|
rx_dp->next_p = rx_dp;
|
|
rx_dp->buf_len = PKTSIZE_ALIGN;
|
|
rx_dp->phys_buf_p = (u8 *)net_rx_packets[i];
|
|
flush_cache((u32)rx_dp->phys_buf_p, PKTSIZE_ALIGN);
|
|
}
|
|
flush_cache((u32)cdmac_bd.rx, sizeof(cdmac_bd.rx));
|
|
|
|
/* Initialize the TX Buffer Descriptors */
|
|
for (i = 0; i < TX_BUF_CNT; i++) {
|
|
tx_dp = &cdmac_bd.tx[i];
|
|
memset(tx_dp, 0, sizeof(*tx_dp));
|
|
tx_dp->next_p = tx_dp;
|
|
}
|
|
flush_cache((u32)cdmac_bd.tx, sizeof(cdmac_bd.tx));
|
|
|
|
/* Reset index counter to the Rx and Tx Buffer descriptors */
|
|
rx_idx = tx_idx = 0;
|
|
|
|
/* initial Rx DMA start by writing to respective TAILDESC_PTR */
|
|
ll_temac->out32(ra[RX_CURDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
|
|
ll_temac->out32(ra[RX_TAILDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ll_temac_halt_sdma(struct eth_device *dev)
|
|
{
|
|
unsigned timeout = 50; /* 1usec * 50 = 50usec */
|
|
struct ll_temac *ll_temac = dev->priv;
|
|
phys_addr_t *ra = ll_temac->sdma_reg_addr;
|
|
|
|
/*
|
|
* Soft reset the DMA
|
|
*
|
|
* Quote from MPMC documentation: Writing a 1 to this field
|
|
* forces the DMA engine to shutdown and reset itself. After
|
|
* setting this bit, software must poll it until the bit is
|
|
* cleared by the DMA. This indicates that the reset process
|
|
* is done and the pipeline has been flushed.
|
|
*/
|
|
ll_temac->out32(ra[DMA_CONTROL_REG], DMA_CONTROL_RESET);
|
|
while (timeout && (ll_temac->in32(ra[DMA_CONTROL_REG])
|
|
& DMA_CONTROL_RESET)) {
|
|
timeout--;
|
|
udelay(1);
|
|
}
|
|
|
|
if (!timeout) {
|
|
printf("%s: Timeout\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ll_temac_reset_sdma(struct eth_device *dev)
|
|
{
|
|
u32 r;
|
|
struct ll_temac *ll_temac = dev->priv;
|
|
phys_addr_t *ra = ll_temac->sdma_reg_addr;
|
|
|
|
/* Soft reset the DMA. */
|
|
if (ll_temac_halt_sdma(dev))
|
|
return -1;
|
|
|
|
/* Now clear the interrupts. */
|
|
r = ll_temac->in32(ra[TX_CHNL_CTRL]);
|
|
r &= ~CHNL_CTRL_IRQ_MASK;
|
|
ll_temac->out32(ra[TX_CHNL_CTRL], r);
|
|
|
|
r = ll_temac->in32(ra[RX_CHNL_CTRL]);
|
|
r &= ~CHNL_CTRL_IRQ_MASK;
|
|
ll_temac->out32(ra[RX_CHNL_CTRL], r);
|
|
|
|
/* Now ACK pending IRQs. */
|
|
ll_temac->out32(ra[TX_IRQ_REG], IRQ_REG_IRQ_MASK);
|
|
ll_temac->out32(ra[RX_IRQ_REG], IRQ_REG_IRQ_MASK);
|
|
|
|
/* Set tail-ptr mode, disable errors for both channels. */
|
|
ll_temac->out32(ra[DMA_CONTROL_REG],
|
|
/* Enable use of tail pointer register */
|
|
DMA_CONTROL_TPE |
|
|
/* Disable error when 2 or 4 bit coalesce cnt overfl */
|
|
DMA_CONTROL_RXOCEID |
|
|
/* Disable error when 2 or 4 bit coalesce cnt overfl */
|
|
DMA_CONTROL_TXOCEID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ll_temac_recv_sdma(struct eth_device *dev)
|
|
{
|
|
int length, pb_idx;
|
|
struct cdmac_bd *rx_dp = &cdmac_bd.rx[rx_idx];
|
|
struct ll_temac *ll_temac = dev->priv;
|
|
phys_addr_t *ra = ll_temac->sdma_reg_addr;
|
|
|
|
if (ll_temac_sdma_error(dev)) {
|
|
|
|
if (ll_temac_reset_sdma(dev))
|
|
return -1;
|
|
|
|
ll_temac_init_sdma(dev);
|
|
}
|
|
|
|
flush_cache((u32)rx_dp, sizeof(*rx_dp));
|
|
|
|
if (!(rx_dp->sca.stctrl & CDMAC_BD_STCTRL_COMPLETED))
|
|
return 0;
|
|
|
|
if (rx_dp->sca.stctrl & (CDMAC_BD_STCTRL_SOP | CDMAC_BD_STCTRL_EOP)) {
|
|
pb_idx = rx_idx;
|
|
length = rx_dp->sca.app[4] & CDMAC_BD_APP4_RXBYTECNT_MASK;
|
|
} else {
|
|
pb_idx = -1;
|
|
length = 0;
|
|
printf("%s: Got part of package, unsupported (%x)\n",
|
|
__func__, rx_dp->sca.stctrl);
|
|
}
|
|
|
|
/* flip the buffer */
|
|
flush_cache((u32)rx_dp->phys_buf_p, length);
|
|
|
|
/* reset the current descriptor */
|
|
rx_dp->sca.stctrl = 0;
|
|
rx_dp->sca.app[4] = 0;
|
|
flush_cache((u32)rx_dp, sizeof(*rx_dp));
|
|
|
|
/* Find next empty buffer descriptor, preparation for next iteration */
|
|
rx_idx = (rx_idx + 1) % PKTBUFSRX;
|
|
rx_dp = &cdmac_bd.rx[rx_idx];
|
|
flush_cache((u32)rx_dp, sizeof(*rx_dp));
|
|
|
|
/* DMA start by writing to respective TAILDESC_PTR */
|
|
ll_temac->out32(ra[RX_CURDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
|
|
ll_temac->out32(ra[RX_TAILDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
|
|
|
|
if (length > 0 && pb_idx != -1)
|
|
net_process_received_packet(net_rx_packets[pb_idx], length);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ll_temac_send_sdma(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
unsigned timeout = 50; /* 1usec * 50 = 50usec */
|
|
struct cdmac_bd *tx_dp = &cdmac_bd.tx[tx_idx];
|
|
struct ll_temac *ll_temac = dev->priv;
|
|
phys_addr_t *ra = ll_temac->sdma_reg_addr;
|
|
|
|
if (ll_temac_sdma_error(dev)) {
|
|
|
|
if (ll_temac_reset_sdma(dev))
|
|
return -1;
|
|
|
|
ll_temac_init_sdma(dev);
|
|
}
|
|
|
|
tx_dp->phys_buf_p = (u8 *)packet;
|
|
tx_dp->buf_len = length;
|
|
tx_dp->sca.stctrl = CDMAC_BD_STCTRL_SOP | CDMAC_BD_STCTRL_EOP |
|
|
CDMAC_BD_STCTRL_STOP_ON_END;
|
|
|
|
flush_cache((u32)packet, length);
|
|
flush_cache((u32)tx_dp, sizeof(*tx_dp));
|
|
|
|
/* DMA start by writing to respective TAILDESC_PTR */
|
|
ll_temac->out32(ra[TX_CURDESC_PTR], (int)tx_dp);
|
|
ll_temac->out32(ra[TX_TAILDESC_PTR], (int)tx_dp);
|
|
|
|
/* Find next empty buffer descriptor, preparation for next iteration */
|
|
tx_idx = (tx_idx + 1) % TX_BUF_CNT;
|
|
tx_dp = &cdmac_bd.tx[tx_idx];
|
|
|
|
do {
|
|
flush_cache((u32)tx_dp, sizeof(*tx_dp));
|
|
udelay(1);
|
|
} while (timeout-- && !(tx_dp->sca.stctrl & CDMAC_BD_STCTRL_COMPLETED));
|
|
|
|
if (!timeout) {
|
|
printf("%s: Timeout\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|