u-boot/arch/arm/mach-socfpga/misc_arria10.c
Marek Vasut d6a61da462 ARM: socfpga: Remove adhoc ethernet reset and configuration
Remove ad-hoc ethernet syscon registers configuration and reset support.
Reset is now handled by the reset framework and the syscon registers are
set in the dwmac_socfpga.c driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-13 22:35:42 +02:00

110 lines
2.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016-2017 Intel Corporation
*/
#include <altera.h>
#include <common.h>
#include <errno.h>
#include <fdtdec.h>
#include <miiphy.h>
#include <netdev.h>
#include <ns16550.h>
#include <watchdog.h>
#include <asm/arch/misc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/reset_manager_arria10.h>
#include <asm/arch/sdram_arria10.h>
#include <asm/arch/system_manager.h>
#include <asm/arch/nic301.h>
#include <asm/io.h>
#include <asm/pl310.h>
#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 0x08
#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 0x58
#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3 0x68
#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 0x18
#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 0x78
#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3 0x98
#if defined(CONFIG_SPL_BUILD)
static struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
#endif
static struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
#if defined(CONFIG_SPL_BUILD)
/*
+ * This function initializes security policies to be consistent across
+ * all logic units in the Arria 10.
+ *
+ * The idea is to set all security policies to be normal, nonsecure
+ * for all units.
+ */
static void initialize_security_policies(void)
{
/* Put OCRAM in non-secure */
writel(0x003f0000, &noc_fw_ocram_base->region0);
writel(0x1, &noc_fw_ocram_base->enable);
/* Put DDR in non-secure */
writel(0xffff0000, SOCFPGA_SDR_FIREWALL_L3_ADDRESS + 0xc);
writel(0x1, SOCFPGA_SDR_FIREWALL_L3_ADDRESS);
/* Enable priviledged and non-priviledged access to L4 peripherals */
writel(~0, SOCFPGA_NOC_L4_PRIV_FLT_OFST);
/* Enable secure and non-secure transactions to bridges */
writel(~0, SOCFPGA_NOC_FW_H2F_SCR_OFST);
writel(~0, SOCFPGA_NOC_FW_H2F_SCR_OFST + 4);
writel(0x0007FFFF, &sysmgr_regs->ecc_intmask_set);
}
int arch_early_init_r(void)
{
initialize_security_policies();
/* Configure the L2 controller to make SDRAM start at 0 */
writel(0x1, &pl310->pl310_addr_filter_start);
/* assert reset to all except L4WD0 and L4TIMER0 */
socfpga_per_reset_all();
return 0;
}
#else
int arch_early_init_r(void)
{
return 0;
}
#endif
/*
* Print CPU information
*/
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
const u32 bsel =
SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo));
puts("CPU: Altera SoCFPGA Arria 10\n");
printf("BOOT: %s\n", bsel_str[bsel].name);
return 0;
}
#endif
void do_bridge_reset(int enable)
{
if (enable)
socfpga_reset_deassert_bridges_handoff();
else
socfpga_bridges_reset();
}