mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 23:51:33 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
159 lines
4.5 KiB
C
159 lines
4.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2016 NXP Semiconductors
|
|
*
|
|
* Configuration settings for the i.MX7S Warp board.
|
|
*/
|
|
|
|
#ifndef __WARP7_CONFIG_H
|
|
#define __WARP7_CONFIG_H
|
|
|
|
#include "mx7_common.h"
|
|
#include <imximage.h>
|
|
|
|
#define PHYS_SDRAM_SIZE SZ_512M
|
|
|
|
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
|
|
|
|
/* MMC Config*/
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
|
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
|
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
|
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
|
|
|
/* Switch on SERIAL_TAG */
|
|
#define CONFIG_SERIAL_TAG
|
|
|
|
#define CONFIG_DFU_ENV_SETTINGS \
|
|
"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_DFU_ENV_SETTINGS \
|
|
"script=boot.scr\0" \
|
|
"script_signed=boot.scr.imx-signed\0" \
|
|
"image=zImage\0" \
|
|
"console=ttymxc0\0" \
|
|
"ethact=usb_ether\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdt_file=imx7s-warp.dtb\0" \
|
|
"fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \
|
|
"optee_addr=" __stringify(CONFIG_OPTEE_LOAD_ADDR)"\0" \
|
|
"boot_fdt=try\0" \
|
|
"ip_dyn=yes\0" \
|
|
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
|
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
|
"rootpart=" __stringify(CONFIG_WARP7_ROOT_PART) "\0" \
|
|
"finduuid=part uuid mmc 0:${rootpart} uuid\0" \
|
|
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
|
"root=PARTUUID=${uuid} rootwait rw\0" \
|
|
"ivt_offset=" __stringify(BOOTROM_IVT_HDR_OFFSET)"\0"\
|
|
"warp7_auth_or_fail=hab_auth_img_or_fail ${hab_ivt_addr} ${filesize} 0;\0" \
|
|
"do_bootscript_hab=" \
|
|
"if test ${hab_enabled} -eq 1; then " \
|
|
"setexpr hab_ivt_addr ${loadaddr} - ${ivt_offset}; " \
|
|
"setenv script ${script_signed}; " \
|
|
"load mmc ${mmcdev}:${mmcpart} ${hab_ivt_addr} ${script}; " \
|
|
"run warp7_auth_or_fail; " \
|
|
"run bootscript; "\
|
|
"fi;\0" \
|
|
"loadbootscript=" \
|
|
"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run finduuid; " \
|
|
"run mmcargs; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if run loadfdt; then " \
|
|
"bootz ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"if test ${boot_fdt} = try; then " \
|
|
"bootz; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else " \
|
|
"bootz; " \
|
|
"fi;\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev};" \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"run do_bootscript_hab;" \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loadimage; then " \
|
|
"run mmcboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi"
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* I2C configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* PMIC */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_PFUZE3000
|
|
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
|
|
|
|
/* environment organization */
|
|
#define CONFIG_ENV_SIZE SZ_8K
|
|
|
|
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
|
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_SYS_MMC_ENV_PART 0
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
|
|
|
|
#define CONFIG_IMX_THERMAL
|
|
|
|
#define CONFIG_USBD_HS
|
|
|
|
/* USB Device Firmware Update support */
|
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
|
|
#define CONFIG_USBNET_DEV_ADDR "de:ad:be:af:00:01"
|
|
|
|
/* Environment variable name to represent HAB enable state */
|
|
#define HAB_ENABLED_ENVNAME "hab_enabled"
|
|
|
|
#endif
|