u-boot/arch/arm/include/asm/arch-lpc32xx/config.h
Masahiro Yamada 09f3ca3dd5 arm, powerpc: select SYS_GENERIC_BOARD
We have finished Generic Board conversion for ARM and PowerPC, i.e.
all the boards have been converted except OpenRISC, SuperH, SPARC,
which have not supported Generic Board framework yet.

Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
defines in include/configs/*.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-10-24 13:50:38 -04:00

101 lines
2.9 KiB
C

/*
* Common definitions for LPC32XX board configurations
*
* Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _LPC32XX_CONFIG_H
#define _LPC32XX_CONFIG_H
/* Basic CPU architecture */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_NR_DRAM_BANKS_MAX 2
/* UART configuration */
#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2)
#elif (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
(CONFIG_SYS_LPC32XX_UART == 7)
#define CONFIG_LPC32XX_HSUART
#else
#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
#endif
#if defined(CONFIG_SYS_NS16550_SERIAL)
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#define CONFIG_SYS_NS16550_COM1 UART3_BASE
#define CONFIG_SYS_NS16550_COM2 UART4_BASE
#define CONFIG_SYS_NS16550_COM3 UART5_BASE
#define CONFIG_SYS_NS16550_COM4 UART6_BASE
#endif
#if defined(CONFIG_LPC32XX_HSUART)
#if CONFIG_SYS_LPC32XX_UART == 1
#define HS_UART_BASE HS_UART1_BASE
#elif CONFIG_SYS_LPC32XX_UART == 2
#define HS_UART_BASE HS_UART2_BASE
#else /* CONFIG_SYS_LPC32XX_UART == 7 */
#define HS_UART_BASE HS_UART7_BASE
#endif
#endif
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
/* Ethernet */
#define LPC32XX_ETH_BASE ETHERNET_BASE
/* NAND */
#if defined(CONFIG_NAND_LPC32XX_SLC)
#define NAND_LARGE_BLOCK_PAGE_SIZE 0x800
#define NAND_SMALL_BLOCK_PAGE_SIZE 0x200
#if !defined(CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_PAGE_SIZE NAND_LARGE_BLOCK_PAGE_SIZE
#endif
#if (CONFIG_SYS_NAND_PAGE_SIZE == NAND_LARGE_BLOCK_PAGE_SIZE)
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63, }
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
#elif (CONFIG_SYS_NAND_PAGE_SIZE == NAND_SMALL_BLOCK_PAGE_SIZE)
#define CONFIG_SYS_NAND_OOBSIZE 16
#define CONFIG_SYS_NAND_ECCPOS { 10, 11, 12, 13, 14, 15, }
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
#else
#error "CONFIG_SYS_NAND_PAGE_SIZE set to an invalid value"
#endif
#define CONFIG_SYS_NAND_ECCSIZE 0x100
#define CONFIG_SYS_NAND_ECCBYTES 3
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#endif /* CONFIG_NAND_LPC32XX_SLC */
/* NOR Flash */
#if defined(CONFIG_SYS_FLASH_CFI)
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_PROTECTION
#endif
/* USB OHCI */
#if defined(CONFIG_USB_OHCI_LPC32XX)
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE USB_BASE
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lpc32xx-ohci"
#endif
#endif /* _LPC32XX_CONFIG_H */