mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
363fb32aca
T1042RDB is a Freescale reference board that hosts the T1042 SoC (and variants). The board is similar to T1040RDB, T1042 is a reduced personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch). T1042RDB is configured with serdes protocol 0x86 which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 1 SGMII on DTSEC3 DTSEC1, DTSEC2 are not connected on board. This Patch - add T1042RDB support - updates README file for T1042RDB details and update commands for switching to alternate banks from vBank0 to vBank4 and vice versa This patch also does minor clean ups for fdt defines for T1042RDB and T1042RDB_PI board Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
83 lines
2 KiB
C
83 lines
2 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_mdio.h>
|
|
#include <malloc.h>
|
|
#include <asm/fsl_dtsec.h>
|
|
|
|
#include "../common/fman.h"
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_FMAN_ENET
|
|
struct memac_mdio_info memac_mdio_info;
|
|
unsigned int i;
|
|
int phy_addr = 0;
|
|
printf("Initializing Fman\n");
|
|
|
|
memac_mdio_info.regs =
|
|
(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
|
|
memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
|
|
|
|
/* Register the real 1G MDIO bus */
|
|
fm_memac_mdio_init(bis, &memac_mdio_info);
|
|
|
|
/*
|
|
* Program on board RGMII, SGMII PHY addresses.
|
|
*/
|
|
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
|
|
int idx = i - FM1_DTSEC1;
|
|
|
|
switch (fm_info_get_enet_if(i)) {
|
|
#ifdef CONFIG_T1040RDB
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
/* T1040RDB only supports SGMII on DTSEC3 */
|
|
fm_info_set_phy_address(FM1_DTSEC3,
|
|
CONFIG_SYS_SGMII1_PHY_ADDR);
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_T1042RDB
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
/* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */
|
|
if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i))
|
|
fm_info_set_phy_address(i, 0);
|
|
/* T1042RDB only supports SGMII on DTSEC3 */
|
|
fm_info_set_phy_address(FM1_DTSEC3,
|
|
CONFIG_SYS_SGMII1_PHY_ADDR);
|
|
break;
|
|
#endif
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
if (FM1_DTSEC4 == i)
|
|
phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
|
|
if (FM1_DTSEC5 == i)
|
|
phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR;
|
|
fm_info_set_phy_address(i, phy_addr);
|
|
break;
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
fm_info_set_phy_address(i, 0);
|
|
break;
|
|
case PHY_INTERFACE_MODE_NONE:
|
|
fm_info_set_phy_address(i, 0);
|
|
break;
|
|
default:
|
|
printf("Fman1: DTSEC%u set to unknown interface %i\n",
|
|
idx + 1, fm_info_get_enet_if(i));
|
|
fm_info_set_phy_address(i, 0);
|
|
break;
|
|
}
|
|
fm_info_set_mdio(i,
|
|
miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
|
|
}
|
|
|
|
cpu_eth_init(bis);
|
|
#endif
|
|
|
|
return pci_eth_init(bis);
|
|
}
|