mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
14d0a02a16
The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de>
204 lines
5.9 KiB
ArmAsm
204 lines
5.9 KiB
ArmAsm
/*
|
|
* Memory Setup stuff - taken from Linux
|
|
*
|
|
* Copyright (c) 2002 Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
|
|
* (c) 2004 IMMS gGmbH <www.imms.de>, Thomas Elste <info@elste.org>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/arch/netarm_registers.h>
|
|
|
|
|
|
/* some parameters for the board */
|
|
#define FLASH_90ns_WAIT_STATES ((NETARM_PLL_COUNT_VAL + 2) / 3)
|
|
#define FLASH_70ns_WAIT_STATES 4
|
|
|
|
#define NETARM_MMAP_CS0_BASE (PHYS_FLASH_1)
|
|
#if 1
|
|
#define NETARM_MMAP_CS0_MASK (~(PHYS_FLASH_1_SIZE - 1))
|
|
#else
|
|
#define NETARM_MMAP_CS0_MASK (~(1000000 - 1))
|
|
#endif
|
|
#define NETARM_MMAP_CS1_BASE (PHYS_SDRAM_1)
|
|
#define NETARM_MMAP_CS1_MASK (~(PHYS_SDRAM_1_SIZE - 1))
|
|
#define NETARM_MMAP_CS2_BASE (PHYS_SDRAM_2)
|
|
#define NETARM_MMAP_CS2_MASK (~(PHYS_SDRAM_2_SIZE - 1))
|
|
#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
|
|
#define NETARM_MMAP_CS3_BASE (PHYS_NVRAM_1)
|
|
#define NETARM_MMAP_CS3_MASK (~(PHYS_NVRAM_SIZE - 1))
|
|
#endif
|
|
#define NETARM_MMAP_CS4_BASE (PHYS_EXT_1)
|
|
#define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1))
|
|
|
|
/* setting up the memory */
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
|
|
#if defined(CONFIG_MODNET50)
|
|
ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - CONFIG_SYS_TEXT_BASE)
|
|
|
|
_jump_to_high:
|
|
/*
|
|
* MEM Config Reg
|
|
* ---------------------------------------------------
|
|
*/
|
|
ldr r0, =NETARM_MEM_MODULE_BASE
|
|
ldr r1, =( NETARM_MEM_REFR_PERIOD_USEC(16) | \
|
|
NETARM_MEM_CFG_REFRESH_EN | \
|
|
NETARM_MEM_CFG_REFR_CYCLE_5CLKS )
|
|
str r1, [r0, #+NETARM_MEM_MODULE_CONFIG]
|
|
|
|
|
|
memsetup_cs0:
|
|
/*
|
|
* Base Addr / Option Reg 0 (Flash)
|
|
* ---------------------------------------------------
|
|
*/
|
|
ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \
|
|
NETARM_MEM_BAR_DRAM_FP | \
|
|
NETARM_MEM_BAR_DRAM_MUX_INT | \
|
|
NETARM_MEM_BAR_DRAM_MUX_BAL | \
|
|
NETARM_MEM_BAR_VALID )
|
|
str r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR]
|
|
|
|
/* trust that the bus size for flash was strapped correctly */
|
|
/* this saves the bus width in r2 and then ORs it back in */
|
|
/* it's pretty safe assumption, otherwise it wouldn't boot */
|
|
ldr r2, [r0, #+NETARM_MEM_CS0_OPTIONS]
|
|
and r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK
|
|
|
|
/* just a test: assume 32 bit flash mem */
|
|
/* mov r2, #NETARM_MEM_OPT_32BIT */
|
|
|
|
ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \
|
|
NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \
|
|
NETARM_MEM_OPT_BCYC_4 | \
|
|
NETARM_MEM_OPT_BSIZE_16 | \
|
|
NETARM_MEM_OPT_16BIT | \
|
|
NETARM_MEM_OPT_READ_ASYNC | \
|
|
NETARM_MEM_OPT_WRITE_ASYNC )
|
|
|
|
orr r1, r1, r2
|
|
str r1, [r0, #+NETARM_MEM_CS0_OPTIONS]
|
|
|
|
|
|
memsetup_cs1:
|
|
/*
|
|
* Base Addr / Option Reg 1 (DRAM #1)
|
|
* ---------------------------------------------------
|
|
*/
|
|
#ifdef CONFIG_NETARM_NET40_REV2
|
|
/* we have to config SDRAM in burst mode */
|
|
ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
|
|
NETARM_MEM_OPT_BCYC_2 | \
|
|
NETARM_MEM_OPT_BSIZE_16 | \
|
|
NETARM_MEM_OPT_WAIT_STATES(0) | \
|
|
NETARM_MEM_OPT_32BIT | \
|
|
NETARM_MEM_OPT_READ_ASYNC | \
|
|
NETARM_MEM_OPT_WRITE_ASYNC )
|
|
str r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
|
|
|
|
ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
|
|
NETARM_MEM_BAR_DRAM_SYNC | \
|
|
NETARM_MEM_BAR_DRAM_MUX_INT | \
|
|
NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
|
|
NETARM_MEM_BAR_DRAM_SEL | \
|
|
NETARM_MEM_BAR_BURST_EN | \
|
|
NETARM_MEM_BAR_VALID )
|
|
str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
|
|
#else
|
|
/* we have to config FPDRAM in burst mode with smaller burst access size */
|
|
ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
|
|
NETARM_MEM_OPT_BCYC_2 | \
|
|
NETARM_MEM_OPT_BSIZE_16 | \
|
|
NETARM_MEM_OPT_WAIT_STATES(0) | \
|
|
NETARM_MEM_OPT_32BIT | \
|
|
NETARM_MEM_OPT_READ_ASYNC | \
|
|
NETARM_MEM_OPT_WRITE_ASYNC )
|
|
str r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
|
|
|
|
ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
|
|
NETARM_MEM_BAR_DRAM_SYNC | \
|
|
NETARM_MEM_BAR_DRAM_MUX_INT | \
|
|
NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
|
|
NETARM_MEM_BAR_DRAM_SEL | \
|
|
NETARM_MEM_BAR_BURST_EN | \
|
|
NETARM_MEM_BAR_VALID )
|
|
str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
|
|
|
|
#endif /* CONFIG_NETARM_NET40_REV2 */
|
|
|
|
|
|
memsetup_cs3:
|
|
/*
|
|
* Base Addr / Option Reg 3 (EEPROM, NVRAM)
|
|
* ---------------------------------------------------
|
|
*/
|
|
#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
|
|
ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \
|
|
NETARM_MEM_OPT_BCYC_3 | \
|
|
NETARM_MEM_OPT_BSIZE_2 | \
|
|
NETARM_MEM_OPT_WAIT_STATES(10) | \
|
|
NETARM_MEM_OPT_8BIT | \
|
|
NETARM_MEM_OPT_READ_ASYNC | \
|
|
NETARM_MEM_OPT_WRITE_ASYNC )
|
|
str r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
|
|
|
|
ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \
|
|
NETARM_MEM_BAR_DRAM_FP | \
|
|
NETARM_MEM_BAR_DRAM_MUX_INT | \
|
|
NETARM_MEM_BAR_DRAM_MUX_BAL | \
|
|
NETARM_MEM_BAR_VALID )
|
|
str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
|
|
#else
|
|
/* we don't need EEPROM --> no config */
|
|
ldr r1, =( 0 )
|
|
str r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
|
|
|
|
ldr r1, =( 0 )
|
|
str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
|
|
#endif
|
|
|
|
|
|
#else
|
|
/*
|
|
#error "missing CONFIG_MODNET50 (see your config.h)"
|
|
*/
|
|
#endif /* CONFIG_MODNET50 */
|
|
|
|
|
|
lowlevel_init_end:
|
|
/*
|
|
* manipulate address in lr and ip to match new
|
|
* address space
|
|
*/
|
|
ldr r3, =(NETARM_MMAP_CS0_BASE)
|
|
mov r0, lr
|
|
add r0, r3, r0
|
|
mov lr, r0
|
|
mov r0, ip
|
|
add r0, r3, r0
|
|
mov ip, r0
|
|
|
|
/* everything is fine now */
|
|
mov pc, lr
|