Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 18:59:44 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/sym53c8xx.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

552 lines
17 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2001
* Denis Peter, MPL AG Switzerland
*
* Most of these definitions are derived from
* linux/drivers/scsi/sym53c8xx_defs.h
*/
#ifndef _SYM53C8XX_DEFS_H
#define _SYM53C8XX_DEFS_H
#define SCNTL0 0x00 /* full arb., ena parity, par->ATN */
#define SCNTL1 0x01 /* no reset */
#define ISCON 0x10 /* connected to scsi */
#define CRST 0x08 /* force reset */
#define IARB 0x02 /* immediate arbitration */
#define SCNTL2 0x02 /* no disconnect expected */
#define SDU 0x80 /* cmd: disconnect will raise error */
#define CHM 0x40 /* sta: chained mode */
#define WSS 0x08 /* sta: wide scsi send [W]*/
#define WSR 0x01 /* sta: wide scsi received [W]*/
#define SCNTL3 0x03 /* cnf system clock dependent */
#define EWS 0x08 /* cmd: enable wide scsi [W]*/
#define ULTRA 0x80 /* cmd: ULTRA enable */
/* bits 0-2, 7 rsvd for C1010 */
#define SCID 0x04 /* cnf host adapter scsi address */
#define RRE 0x40 /* r/w:e enable response to resel. */
#define SRE 0x20 /* r/w:e enable response to select */
#define SXFER 0x05 /* ### Sync speed and count */
/* bits 6-7 rsvd for C1010 */
#define SDID 0x06 /* ### Destination-ID */
#define GPREG 0x07 /* ??? IO-Pins */
#define SFBR 0x08 /* ### First byte in phase */
#define SOCL 0x09
#define CREQ 0x80 /* r/w: SCSI-REQ */
#define CACK 0x40 /* r/w: SCSI-ACK */
#define CBSY 0x20 /* r/w: SCSI-BSY */
#define CSEL 0x10 /* r/w: SCSI-SEL */
#define CATN 0x08 /* r/w: SCSI-ATN */
#define CMSG 0x04 /* r/w: SCSI-MSG */
#define CC_D 0x02 /* r/w: SCSI-C_D */
#define CI_O 0x01 /* r/w: SCSI-I_O */
#define SSID 0x0a
#define SBCL 0x0b
#define DSTAT 0x0c
#define DFE 0x80 /* sta: dma fifo empty */
#define MDPE 0x40 /* int: master data parity error */
#define BF 0x20 /* int: script: bus fault */
#define ABRT 0x10 /* int: script: command aborted */
#define SSI 0x08 /* int: script: single step */
#define SIR 0x04 /* int: script: interrupt instruct. */
#define IID 0x01 /* int: script: illegal instruct. */
#define SSTAT0 0x0d
#define ILF 0x80 /* sta: data in SIDL register lsb */
#define ORF 0x40 /* sta: data in SODR register lsb */
#define OLF 0x20 /* sta: data in SODL register lsb */
#define AIP 0x10 /* sta: arbitration in progress */
#define LOA 0x08 /* sta: arbitration lost */
#define WOA 0x04 /* sta: arbitration won */
#define IRST 0x02 /* sta: scsi reset signal */
#define SDP 0x01 /* sta: scsi parity signal */
#define SSTAT1 0x0e
#define FF3210 0xf0 /* sta: bytes in the scsi fifo */
#define SSTAT2 0x0f
#define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
#define ORF1 0x40 /* sta: data in SODR register msb[W]*/
#define OLF1 0x20 /* sta: data in SODL register msb[W]*/
#define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
#define LDSC 0x02 /* sta: disconnect & reconnect */
#define DSA 0x10 /* --> Base page */
#define DSA1 0x11
#define DSA2 0x12
#define DSA3 0x13
#define ISTAT 0x14 /* --> Main Command and status */
#define CABRT 0x80 /* cmd: abort current operation */
#define SRST 0x40 /* mod: reset chip */
#define SIGP 0x20 /* r/w: message from host to ncr */
#define SEM 0x10 /* r/w: message between host + ncr */
#define CON 0x08 /* sta: connected to scsi */
#define INTF 0x04 /* sta: int on the fly (reset by wr)*/
#define SIP 0x02 /* sta: scsi-interrupt */
#define DIP 0x01 /* sta: host/script interrupt */
#define CTEST0 0x18
#define CTEST1 0x19
#define CTEST2 0x1a
#define CSIGP 0x40
/* bits 0-2,7 rsvd for C1010 */
#define CTEST3 0x1b
#define FLF 0x08 /* cmd: flush dma fifo */
#define CLF 0x04 /* cmd: clear dma fifo */
#define FM 0x02 /* mod: fetch pin mode */
#define WRIE 0x01 /* mod: write and invalidate enable */
/* bits 4-7 rsvd for C1010 */
#define DFIFO 0x20
#define CTEST4 0x21
#define BDIS 0x80 /* mod: burst disable */
#define MPEE 0x08 /* mod: master parity error enable */
#define CTEST5 0x22
#define DFS 0x20 /* mod: dma fifo size */
/* bits 0-1, 3-7 rsvd for C1010 */
#define CTEST6 0x23
#define DBC 0x24 /* ### Byte count and command */
#define DNAD 0x28 /* ### Next command register */
#define DSP 0x2c /* --> Script Pointer */
#define DSPS 0x30 /* --> Script pointer save/opcode#2 */
#define SCRATCHA 0x34 /* Temporary register a */
#define SCRATCHA1 0x35
#define SCRATCHA2 0x36
#define SCRATCHA3 0x37
#define DMODE 0x38
#define BL_2 0x80 /* mod: burst length shift value +2 */
#define BL_1 0x40 /* mod: burst length shift value +1 */
#define ERL 0x08 /* mod: enable read line */
#define ERMP 0x04 /* mod: enable read multiple */
#define BOF 0x02 /* mod: burst op code fetch */
#define MAN 0x01 /* mod: manual start */
#define DIEN 0x39
#define SBR 0x3a
#define DCNTL 0x3b /* --> Script execution control */
#define CLSE 0x80 /* mod: cache line size enable */
#define PFF 0x40 /* cmd: pre-fetch flush */
#define PFEN 0x20 /* mod: pre-fetch enable */
#define SSM 0x10 /* mod: single step mode */
#define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
#define STD 0x04 /* cmd: start dma mode */
#define IRQD 0x02 /* mod: irq disable */
#define NOCOM 0x01 /* cmd: protect sfbr while reselect */
/* bits 0-1 rsvd for C1010 */
#define ADDER 0x3c
#define SIEN 0x40 /* -->: interrupt enable */
#define SIST 0x42 /* <--: interrupt status */
#define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
#define STO 0x0400/* sta: timeout (select) */
#define GEN 0x0200/* sta: timeout (general) */
#define HTH 0x0100/* sta: timeout (handshake) */
#define MA 0x80 /* sta: phase mismatch */
#define CMP 0x40 /* sta: arbitration complete */
#define SEL 0x20 /* sta: selected by another device */
#define RSL 0x10 /* sta: reselected by another device*/
#define SGE 0x08 /* sta: gross error (over/underflow)*/
#define UDC 0x04 /* sta: unexpected disconnect */
#define RST 0x02 /* sta: scsi bus reset detected */
#define PAR 0x01 /* sta: scsi parity error */
#define SLPAR 0x44
#define SWIDE 0x45
#define MACNTL 0x46
#define GPCNTL 0x47
#define STIME0 0x48 /* cmd: timeout for select&handshake*/
#define STIME1 0x49 /* cmd: timeout user defined */
#define RESPID 0x4a /* sta: Reselect-IDs */
#define STEST0 0x4c
#define STEST1 0x4d
#define SCLK 0x80 /* Use the PCI clock as SCSI clock */
#define DBLEN 0x08 /* clock doubler running */
#define DBLSEL 0x04 /* clock doubler selected */
#define STEST2 0x4e
#define ROF 0x40 /* reset scsi offset (after gross error!) */
#define EXT 0x02 /* extended filtering */
#define STEST3 0x4f
#define TE 0x80 /* c: tolerAnt enable */
#define HSC 0x20 /* c: Halt SCSI Clock */
#define CSF 0x02 /* c: clear scsi fifo */
#define SIDL 0x50 /* Lowlevel: latched from scsi data */
#define STEST4 0x52
#define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
#define SMODE_HVD 0x40 /* High Voltage Differential */
#define SMODE_SE 0x80 /* Single Ended */
#define SMODE_LVD 0xc0 /* Low Voltage Differential */
#define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
/* bits 0-5 rsvd for C1010 */
#define SODL 0x54 /* Lowlevel: data out to scsi data */
#define SBDL 0x58 /* Lowlevel: data from scsi data */
/*-----------------------------------------------------------
**
** Utility macros for the script.
**
**-----------------------------------------------------------
*/
#define REG(r) (r)
/*-----------------------------------------------------------
**
** SCSI phases
**
** DT phases illegal for ncr driver.
**
**-----------------------------------------------------------
*/
#define SCR_DATA_OUT 0x00000000
#define SCR_DATA_IN 0x01000000
#define SCR_COMMAND 0x02000000
#define SCR_STATUS 0x03000000
#define SCR_DT_DATA_OUT 0x04000000
#define SCR_DT_DATA_IN 0x05000000
#define SCR_MSG_OUT 0x06000000
#define SCR_MSG_IN 0x07000000
#define SCR_ILG_OUT 0x04000000
#define SCR_ILG_IN 0x05000000
/*-----------------------------------------------------------
**
** Data transfer via SCSI.
**
**-----------------------------------------------------------
**
** MOVE_ABS (LEN)
** <<start address>>
**
** MOVE_IND (LEN)
** <<dnad_offset>>
**
** MOVE_TBL
** <<dnad_offset>>
**
**-----------------------------------------------------------
*/
#define OPC_MOVE 0x08000000
#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
#define SCR_CHMOV_TBL (0x10000000)
/*-----------------------------------------------------------
**
** Selection
**
**-----------------------------------------------------------
**
** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
** <<alternate_address>>
**
** SEL_TBL | << dnad_offset>> [ | REL_JMP]
** <<alternate_address>>
**
**-----------------------------------------------------------
*/
#define SCR_SEL_ABS 0x40000000
#define SCR_SEL_ABS_ATN 0x41000000
#define SCR_SEL_TBL 0x42000000
#define SCR_SEL_TBL_ATN 0x43000000
#define SCR_JMP_REL 0x04000000
#define SCR_ID(id) (((unsigned long)(id)) << 16)
/*-----------------------------------------------------------
**
** Waiting for Disconnect or Reselect
**
**-----------------------------------------------------------
**
** WAIT_DISC
** dummy: <<alternate_address>>
**
** WAIT_RESEL
** <<alternate_address>>
**
**-----------------------------------------------------------
*/
#define SCR_WAIT_DISC 0x48000000
#define SCR_WAIT_RESEL 0x50000000
/*-----------------------------------------------------------
**
** Bit Set / Reset
**
**-----------------------------------------------------------
**
** SET (flags {|.. })
**
** CLR (flags {|.. })
**
**-----------------------------------------------------------
*/
#define SCR_SET(f) (0x58000000 | (f))
#define SCR_CLR(f) (0x60000000 | (f))
#define SCR_CARRY 0x00000400
#define SCR_TRG 0x00000200
#define SCR_ACK 0x00000040
#define SCR_ATN 0x00000008
/*-----------------------------------------------------------
**
** Memory to memory move
**
**-----------------------------------------------------------
**
** COPY (bytecount)
** << source_address >>
** << destination_address >>
**
** SCR_COPY sets the NO FLUSH option by default.
** SCR_COPY_F does not set this option.
**
** For chips which do not support this option,
** ncr_copy_and_bind() will remove this bit.
**-----------------------------------------------------------
*/
#define SCR_NO_FLUSH 0x01000000
#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
#define SCR_COPY_F(n) (0xc0000000 | (n))
/*-----------------------------------------------------------
**
** Register move and binary operations
**
**-----------------------------------------------------------
**
** SFBR_REG (reg, op, data) reg = SFBR op data
** << 0 >>
**
** REG_SFBR (reg, op, data) SFBR = reg op data
** << 0 >>
**
** REG_REG (reg, op, data) reg = reg op data
** << 0 >>
**
**-----------------------------------------------------------
** On 810A, 860, 825A, 875, 895 and 896 chips the content
** of SFBR register can be used as data (SCR_SFBR_DATA).
** The 896 has additionnal IO registers starting at
** offset 0x80. Bit 7 of register offset is stored in
** bit 7 of the SCRIPTS instruction first DWORD.
**-----------------------------------------------------------
*/
#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul)) /* + ((ofs) & 0x80)) */
#define SCR_SFBR_REG(reg,op,data) \
(0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
#define SCR_REG_SFBR(reg,op,data) \
(0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
#define SCR_REG_REG(reg,op,data) \
(0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
#define SCR_LOAD 0x00000000
#define SCR_SHL 0x01000000
#define SCR_OR 0x02000000
#define SCR_XOR 0x03000000
#define SCR_AND 0x04000000
#define SCR_SHR 0x05000000
#define SCR_ADD 0x06000000
#define SCR_ADDC 0x07000000
#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
/*-----------------------------------------------------------
**
** FROM_REG (reg) SFBR = reg
** << 0 >>
**
** TO_REG (reg) reg = SFBR
** << 0 >>
**
** LOAD_REG (reg, data) reg = <data>
** << 0 >>
**
** LOAD_SFBR(data) SFBR = <data>
** << 0 >>
**
**-----------------------------------------------------------
*/
#define SCR_FROM_REG(reg) \
SCR_REG_SFBR(reg,SCR_OR,0)
#define SCR_TO_REG(reg) \
SCR_SFBR_REG(reg,SCR_OR,0)
#define SCR_LOAD_REG(reg,data) \
SCR_REG_REG(reg,SCR_LOAD,data)
#define SCR_LOAD_SFBR(data) \
(SCR_REG_SFBR (gpreg, SCR_LOAD, data))
/*-----------------------------------------------------------
**
** LOAD from memory to register.
** STORE from register to memory.
**
** Only supported by 810A, 860, 825A, 875, 895 and 896.
**
**-----------------------------------------------------------
**
** LOAD_ABS (LEN)
** <<start address>>
**
** LOAD_REL (LEN) (DSA relative)
** <<dsa_offset>>
**
**-----------------------------------------------------------
*/
#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
#define SCR_NO_FLUSH2 0x02000000
#define SCR_DSA_REL2 0x10000000
#define SCR_LOAD_R(reg, how, n) \
(0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
#define SCR_STORE_R(reg, how, n) \
(0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
/*-----------------------------------------------------------
**
** Waiting for Disconnect or Reselect
**
**-----------------------------------------------------------
**
** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
** <<address>>
**
** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
** <<distance>>
**
** CALL [ | IFTRUE/IFFALSE ( ... ) ]
** <<address>>
**
** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
** <<distance>>
**
** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
** <<dummy>>
**
** INT [ | IFTRUE/IFFALSE ( ... ) ]
** <<ident>>
**
** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
** <<ident>>
**
** Conditions:
** WHEN (phase)
** IF (phase)
** CARRYSET
** DATA (data, mask)
**
**-----------------------------------------------------------
*/
#define SCR_NO_OP 0x80000000
#define SCR_JUMP 0x80080000
#define SCR_JUMP64 0x80480000
#define SCR_JUMPR 0x80880000
#define SCR_CALL 0x88080000
#define SCR_CALLR 0x88880000
#define SCR_RETURN 0x90080000
#define SCR_INT 0x98080000
#define SCR_INT_FLY 0x98180000
#define IFFALSE(arg) (0x00080000 | (arg))
#define IFTRUE(arg) (0x00000000 | (arg))
#define WHEN(phase) (0x00030000 | (phase))
#define IF(phase) (0x00020000 | (phase))
#define DATA(D) (0x00040000 | ((D) & 0xff))
#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
#define CARRYSET (0x00200000)
#define SIR_COMPLETE 0x10000000
/* script errors */
#define SIR_SEL_ATN_NO_MSG_OUT 0x00000001
#define SIR_CMD_OUT_ILL_PH 0x00000002
#define SIR_STATUS_ILL_PH 0x00000003
#define SIR_MSG_RECEIVED 0x00000004
#define SIR_DATA_IN_ERR 0x00000005
#define SIR_DATA_OUT_ERR 0x00000006
#define SIR_SCRIPT_ERROR 0x00000007
#define SIR_MSG_OUT_NO_CMD 0x00000008
#define SIR_MSG_OVER7 0x00000009
/* Fly interrupt */
#define INT_ON_FY 0x00000080
/* Hardware errors are defined in scsi.h */
#define SCSI_IDENTIFY 0xC0
#endif
Reference in a new issue View git blame Copy permalink