u-boot/drivers/net/phy/Makefile
Florian Fainelli 137963d71a net: phy: Add Broadcom BCM53xx switch driver
Add a minimalistic Broadcom BCM53xx (roboswitch) switch driver similar
to the Marvell MV88E617x. This takes care of configuring the minimum
amount out of the switch hardware such that each user visible port
(configurable) and the CPU port can forward packets between each other
while preserving isolation with other ports.

This is useful for e.g: the Lamobo R1 board featuring a Broadcom
BCM53125 switch.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15 12:05:21 -06:00

34 lines
1.1 KiB
Makefile

#
# (C) Copyright 2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_BITBANGMII) += miiphybb.o
obj-$(CONFIG_B53_SWITCH) += b53.o
obj-$(CONFIG_MV88E61XX_SWITCH) += mv88e61xx.o
obj-$(CONFIG_MV88E6352_SWITCH) += mv88e6352.o
obj-$(CONFIG_PHYLIB) += phy.o
obj-$(CONFIG_PHYLIB_10G) += generic_10g.o
obj-$(CONFIG_PHY_AQUANTIA) += aquantia.o
obj-$(CONFIG_PHY_ATHEROS) += atheros.o
obj-$(CONFIG_PHY_BROADCOM) += broadcom.o
obj-$(CONFIG_PHY_CORTINA) += cortina.o
obj-$(CONFIG_PHY_DAVICOM) += davicom.o
obj-$(CONFIG_PHY_ET1011C) += et1011c.o
obj-$(CONFIG_PHY_LXT) += lxt.o
obj-$(CONFIG_PHY_MARVELL) += marvell.o
obj-$(CONFIG_PHY_MICREL_KSZ8XXX) += micrel_ksz8xxx.o
obj-$(CONFIG_PHY_MICREL_KSZ90X1) += micrel_ksz90x1.o
obj-$(CONFIG_PHY_MESON_GXL) += meson-gxl.o
obj-$(CONFIG_PHY_NATSEMI) += natsemi.o
obj-$(CONFIG_PHY_REALTEK) += realtek.o
obj-$(CONFIG_PHY_SMSC) += smsc.o
obj-$(CONFIG_PHY_TERANETICS) += teranetics.o
obj-$(CONFIG_PHY_TI) += ti.o
obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o
obj-$(CONFIG_PHY_VITESSE) += vitesse.o
obj-$(CONFIG_PHY_MSCC) += mscc.o
obj-$(CONFIG_PHY_FIXED) += fixed.o