mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
d5abcf94c7
To keep a consistent MMC device mapping in SPL and in u-boot, let's register the MMC controllers the same way in u-boot and in the SPL. In terms of boot time, it doesn't hurt to register more controllers than needed because the MMC device is initialized only prior being accessed for the first time. Having the same device mapping in SPL and u-boot allows us to use the environment in SPL whatever the MMC boot device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
341 lines
8 KiB
C
341 lines
8 KiB
C
/*
|
|
* board.c
|
|
*
|
|
* Common board functions for AM33XX based boards
|
|
*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <ns16550.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <cpsw.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/musb.h>
|
|
#include <asm/omap_musb.h>
|
|
#include <asm/davinci_rtc.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if !CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static const struct ns16550_platdata am33xx_serial[] = {
|
|
{ .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
|
|
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
|
|
# ifdef CONFIG_SYS_NS16550_COM2
|
|
{ .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
|
|
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
|
|
# ifdef CONFIG_SYS_NS16550_COM3
|
|
{ .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
|
|
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
|
|
{ .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
|
|
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
|
|
{ .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
|
|
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
|
|
{ .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
|
|
.clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
|
|
# endif
|
|
# endif
|
|
};
|
|
|
|
U_BOOT_DEVICES(am33xx_uarts) = {
|
|
{ "ns16550_serial", &am33xx_serial[0] },
|
|
# ifdef CONFIG_SYS_NS16550_COM2
|
|
{ "ns16550_serial", &am33xx_serial[1] },
|
|
# ifdef CONFIG_SYS_NS16550_COM3
|
|
{ "ns16550_serial", &am33xx_serial[2] },
|
|
{ "ns16550_serial", &am33xx_serial[3] },
|
|
{ "ns16550_serial", &am33xx_serial[4] },
|
|
{ "ns16550_serial", &am33xx_serial[5] },
|
|
# endif
|
|
# endif
|
|
};
|
|
|
|
#ifdef CONFIG_DM_GPIO
|
|
static const struct omap_gpio_platdata am33xx_gpio[] = {
|
|
{ 0, AM33XX_GPIO0_BASE },
|
|
{ 1, AM33XX_GPIO1_BASE },
|
|
{ 2, AM33XX_GPIO2_BASE },
|
|
{ 3, AM33XX_GPIO3_BASE },
|
|
#ifdef CONFIG_AM43XX
|
|
{ 4, AM33XX_GPIO4_BASE },
|
|
{ 5, AM33XX_GPIO5_BASE },
|
|
#endif
|
|
};
|
|
|
|
U_BOOT_DEVICES(am33xx_gpios) = {
|
|
{ "gpio_omap", &am33xx_gpio[0] },
|
|
{ "gpio_omap", &am33xx_gpio[1] },
|
|
{ "gpio_omap", &am33xx_gpio[2] },
|
|
{ "gpio_omap", &am33xx_gpio[3] },
|
|
#ifdef CONFIG_AM43XX
|
|
{ "gpio_omap", &am33xx_gpio[4] },
|
|
{ "gpio_omap", &am33xx_gpio[5] },
|
|
#endif
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef CONFIG_DM_GPIO
|
|
static const struct gpio_bank gpio_bank_am33xx[] = {
|
|
{ (void *)AM33XX_GPIO0_BASE },
|
|
{ (void *)AM33XX_GPIO1_BASE },
|
|
{ (void *)AM33XX_GPIO2_BASE },
|
|
{ (void *)AM33XX_GPIO3_BASE },
|
|
#ifdef CONFIG_AM43XX
|
|
{ (void *)AM33XX_GPIO4_BASE },
|
|
{ (void *)AM33XX_GPIO5_BASE },
|
|
#endif
|
|
};
|
|
|
|
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
|
|
#endif
|
|
|
|
#if defined(CONFIG_MMC_OMAP_HS)
|
|
int cpu_mmc_init(bd_t *bis)
|
|
{
|
|
int ret;
|
|
|
|
ret = omap_mmc_init(0, 0, 0, -1, -1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return omap_mmc_init(1, 0, 0, -1, -1);
|
|
}
|
|
#endif
|
|
|
|
/* AM33XX has two MUSB controllers which can be host or gadget */
|
|
#if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
|
|
(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
|
|
(!defined(CONFIG_DM_USB))
|
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
/* USB 2.0 PHY Control */
|
|
#define CM_PHY_PWRDN (1 << 0)
|
|
#define CM_PHY_OTG_PWRDN (1 << 1)
|
|
#define OTGVDET_EN (1 << 19)
|
|
#define OTGSESSENDEN (1 << 20)
|
|
|
|
static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
|
|
{
|
|
if (on) {
|
|
clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
|
|
OTGVDET_EN | OTGSESSENDEN);
|
|
} else {
|
|
clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
|
|
}
|
|
}
|
|
|
|
static struct musb_hdrc_config musb_config = {
|
|
.multipoint = 1,
|
|
.dyn_fifo = 1,
|
|
.num_eps = 16,
|
|
.ram_bits = 12,
|
|
};
|
|
|
|
#ifdef CONFIG_AM335X_USB0
|
|
static void am33xx_otg0_set_phy_power(struct udevice *dev, u8 on)
|
|
{
|
|
am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
|
|
}
|
|
|
|
struct omap_musb_board_data otg0_board_data = {
|
|
.set_phy_power = am33xx_otg0_set_phy_power,
|
|
};
|
|
|
|
static struct musb_hdrc_platform_data otg0_plat = {
|
|
.mode = CONFIG_AM335X_USB0_MODE,
|
|
.config = &musb_config,
|
|
.power = 50,
|
|
.platform_ops = &musb_dsps_ops,
|
|
.board_data = &otg0_board_data,
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_AM335X_USB1
|
|
static void am33xx_otg1_set_phy_power(struct udevice *dev, u8 on)
|
|
{
|
|
am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
|
|
}
|
|
|
|
struct omap_musb_board_data otg1_board_data = {
|
|
.set_phy_power = am33xx_otg1_set_phy_power,
|
|
};
|
|
|
|
static struct musb_hdrc_platform_data otg1_plat = {
|
|
.mode = CONFIG_AM335X_USB1_MODE,
|
|
.config = &musb_config,
|
|
.power = 50,
|
|
.platform_ops = &musb_dsps_ops,
|
|
.board_data = &otg1_board_data,
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
int arch_misc_init(void)
|
|
{
|
|
#ifndef CONFIG_DM_USB
|
|
#ifdef CONFIG_AM335X_USB0
|
|
musb_register(&otg0_plat, &otg0_board_data,
|
|
(void *)USB0_OTG_BASE);
|
|
#endif
|
|
#ifdef CONFIG_AM335X_USB1
|
|
musb_register(&otg1_plat, &otg1_board_data,
|
|
(void *)USB1_OTG_BASE);
|
|
#endif
|
|
#else
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = uclass_first_device(UCLASS_MISC, &dev);
|
|
if (ret || !dev)
|
|
return ret;
|
|
|
|
#if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER)
|
|
ret = usb_ether_init();
|
|
if (ret) {
|
|
error("USB ether init failed\n");
|
|
return ret;
|
|
}
|
|
#endif
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
/*
|
|
* In the case of non-SPL based booting we'll want to call these
|
|
* functions a tiny bit later as it will require gd to be set and cleared
|
|
* and that's not true in s_init in this case so we cannot do it there.
|
|
*/
|
|
int board_early_init_f(void)
|
|
{
|
|
prcm_init();
|
|
set_mux_conf_regs();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function is the place to do per-board things such as ramp up the
|
|
* MPU clock frequency.
|
|
*/
|
|
__weak void am33xx_spl_board_init(void)
|
|
{
|
|
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
|
|
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
|
|
}
|
|
|
|
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
|
|
static void rtc32k_enable(void)
|
|
{
|
|
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
|
|
|
|
/*
|
|
* Unlock the RTC's registers. For more details please see the
|
|
* RTC_SS section of the TRM. In order to unlock we need to
|
|
* write these specific values (keys) in this order.
|
|
*/
|
|
writel(RTC_KICK0R_WE, &rtc->kick0r);
|
|
writel(RTC_KICK1R_WE, &rtc->kick1r);
|
|
|
|
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
|
|
writel((1 << 3) | (1 << 6), &rtc->osc);
|
|
}
|
|
#endif
|
|
|
|
static void uart_soft_reset(void)
|
|
{
|
|
struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
|
|
u32 regval;
|
|
|
|
regval = readl(&uart_base->uartsyscfg);
|
|
regval |= UART_RESET;
|
|
writel(regval, &uart_base->uartsyscfg);
|
|
while ((readl(&uart_base->uartsyssts) &
|
|
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
|
|
;
|
|
|
|
/* Disable smart idle */
|
|
regval = readl(&uart_base->uartsyscfg);
|
|
regval |= UART_SMART_IDLE_EN;
|
|
writel(regval, &uart_base->uartsyscfg);
|
|
}
|
|
|
|
static void watchdog_disable(void)
|
|
{
|
|
struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
|
|
|
|
writel(0xAAAA, &wdtimer->wdtwspr);
|
|
while (readl(&wdtimer->wdtwwps) != 0x0)
|
|
;
|
|
writel(0x5555, &wdtimer->wdtwspr);
|
|
while (readl(&wdtimer->wdtwwps) != 0x0)
|
|
;
|
|
}
|
|
|
|
void s_init(void)
|
|
{
|
|
}
|
|
|
|
void early_system_init(void)
|
|
{
|
|
/*
|
|
* The ROM will only have set up sufficient pinmux to allow for the
|
|
* first 4KiB NOR to be read, we must finish doing what we know of
|
|
* the NOR mux in this space in order to continue.
|
|
*/
|
|
#ifdef CONFIG_NOR_BOOT
|
|
enable_norboot_pin_mux();
|
|
#endif
|
|
watchdog_disable();
|
|
set_uart_mux_conf();
|
|
setup_early_clocks();
|
|
uart_soft_reset();
|
|
#ifdef CONFIG_TI_I2C_BOARD_DETECT
|
|
do_board_detect();
|
|
#endif
|
|
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
|
|
/* Enable RTC32K clock */
|
|
rtc32k_enable();
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
early_system_init();
|
|
board_early_init_f();
|
|
sdram_init();
|
|
}
|
|
#endif
|
|
|
|
#endif
|
|
|
|
int arch_cpu_init_dm(void)
|
|
{
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
early_system_init();
|
|
#endif
|
|
return 0;
|
|
}
|