mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 07:31:15 +00:00
f38f5f4bcf
This patch adds board support for the Toradex Apalis TK1 a computer on module which can be used on different carrier boards. The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. Furthermore, there is a Kinetis MK20DN512 companion micro controller for analogue, CAN and resistive touch functionality. For the sake of ease of use we do not distinguish between different carrier boards for now as the base module features are deemed sufficient enough for regular booting. The following functionality is working so far: - eMMC boot, environment storage and Toradex factory config block - Gigabit Ethernet - MMC/SD cards (both MMC1 as well as SD1 slot) - USB client/host (dual role OTG port as client e.g. for DFU/UMS or host, other two ports as host) Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
176 lines
5.7 KiB
C
176 lines
5.7 KiB
C
/*
|
|
* Copyright (c) 2017 Toradex, Inc.
|
|
*
|
|
* Configuration settings for the Toradex Apalis TK1 modules.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <linux/sizes.h>
|
|
|
|
/* enable PMIC */
|
|
#define CONFIG_AS3722_POWER
|
|
|
|
#include "tegra124-common.h"
|
|
|
|
#define CONFIG_ARCH_MISC_INIT
|
|
|
|
/* High-level configuration options */
|
|
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
|
|
|
|
/* Board-specific serial config */
|
|
#define CONFIG_TEGRA_ENABLE_UARTA
|
|
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C_TEGRA
|
|
|
|
/* SD/MMC support */
|
|
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
|
|
|
|
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
|
|
CONFIG_TDX_CFG_BLOCK_OFFSET)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_SYS_MMC_ENV_PART 1
|
|
|
|
/* USB host support */
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_USB_EHCI_TEGRA
|
|
|
|
/* PCI host support */
|
|
#undef CONFIG_PCI_SCAN_SHOW
|
|
#define CONFIG_CMD_PCI
|
|
|
|
/* PCI networking support */
|
|
#define CONFIG_E1000_NO_NVM
|
|
|
|
/* General networking support */
|
|
#define CONFIG_IP_DEFRAG
|
|
#define CONFIG_TFTP_BLOCKSIZE 16352
|
|
#define CONFIG_TFTP_TSIZE
|
|
|
|
/* Miscellaneous commands */
|
|
#define CONFIG_FAT_WRITE
|
|
|
|
#undef CONFIG_IPADDR
|
|
#define CONFIG_IPADDR 192.168.10.2
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#undef CONFIG_SERVERIP
|
|
#define CONFIG_SERVERIP 192.168.10.1
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run emmcboot; setenv fdtfile ${soc}-apalis-${fdt_board}.dtb && " \
|
|
"run distro_bootcmd"
|
|
|
|
#define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
|
|
"boot part 0 1 mmcpart 0; " \
|
|
"rootfs part 0 2 mmcpart 0; " \
|
|
"uImage fat 0 1 mmcpart 0; " \
|
|
"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
|
|
|
|
#define EMMC_BOOTCMD \
|
|
"emmcargs=ip=off root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait\0" \
|
|
"emmcboot=run setup; setenv bootargs ${defargs} ${emmcargs} " \
|
|
"${setupargs} ${vidargs}; echo Booting from internal eMMC " \
|
|
"chip...; run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
|
|
"${boot_file} && run fdt_fixup && " \
|
|
"bootm ${kernel_addr_r} - ${dtbparam}\0" \
|
|
"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
|
|
"${soc}-apalis-${fdt_board}.dtb && " \
|
|
"setenv dtbparam ${fdt_addr_r}\0"
|
|
|
|
#define NFS_BOOTCMD \
|
|
"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
|
|
"nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
|
|
"${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
|
|
"run nfsdtbload; dhcp ${kernel_addr_r} " \
|
|
"&& run fdt_fixup && bootm ${kernel_addr_r} - ${dtbparam}\0" \
|
|
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
|
|
"${soc}-apalis-${fdt_board}.dtb " \
|
|
"&& setenv dtbparam ${fdt_addr_r}\0"
|
|
|
|
#define SD_BOOTCMD \
|
|
"sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext3 rootwait\0" \
|
|
"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
|
|
"${vidargs}; echo Booting from SD card in 8bit slot...; " \
|
|
"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
|
|
"${boot_file} && run fdt_fixup && " \
|
|
"bootm ${kernel_addr_r} - ${dtbparam}\0" \
|
|
"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
|
|
"${soc}-apalis-${fdt_board}.dtb " \
|
|
"&& setenv dtbparam ${fdt_addr_r}\0"
|
|
|
|
#define USB_BOOTCMD \
|
|
"usbargs=ip=off root=/dev/sda2 rw rootfstype=ext3 rootwait\0" \
|
|
"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
|
|
"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
|
|
"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
|
|
"${boot_file} && run fdt_fixup && " \
|
|
"bootm ${kernel_addr_r} - ${dtbparam}\0" \
|
|
"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
|
|
"${soc}-apalis-${fdt_board}.dtb " \
|
|
"&& setenv dtbparam ${fdt_addr_r}\0"
|
|
|
|
#define BOARD_EXTRA_ENV_SETTINGS \
|
|
"boot_file=uImage\0" \
|
|
"console=ttyS0\0" \
|
|
"defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
|
|
"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0\0" \
|
|
"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
|
|
EMMC_BOOTCMD \
|
|
"fdt_board=eval\0" \
|
|
"fdt_fixup=;\0" \
|
|
NFS_BOOTCMD \
|
|
SD_BOOTCMD \
|
|
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
|
|
"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
|
|
"flash_eth.img && source ${loadaddr}\0" \
|
|
"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
|
|
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
|
|
"|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1 " \
|
|
"${loadaddr} flash_blk.img && " \
|
|
"source ${loadaddr}\0" \
|
|
"setup=setenv setupargs igb_mac=${ethaddr} " \
|
|
"consoleblank=0 no_console_suspend=1 console=tty1 " \
|
|
"console=${console},${baudrate}n8 debug_uartport=lsport,0 " \
|
|
"${memargs}\0" \
|
|
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
|
|
"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
|
|
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
|
|
"source ${loadaddr}\0" \
|
|
USB_BOOTCMD \
|
|
"vidargs=video=tegrafb0:640x480-16@60 fbcon=map:1\0"
|
|
|
|
/* Increase console I/O buffer size */
|
|
#undef CONFIG_SYS_CBSIZE
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
|
|
/* Increase arguments buffer size */
|
|
#undef CONFIG_SYS_BARGSIZE
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
/* Increase print buffer size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
/* Increase maximum number of arguments */
|
|
#undef CONFIG_SYS_MAXARGS
|
|
#define CONFIG_SYS_MAXARGS 32
|
|
|
|
#define CONFIG_CMD_TIME
|
|
|
|
#define CONFIG_SUPPORT_RAW_INITRD
|
|
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
|
|
|
|
#include "tegra-common-usb-gadget.h"
|
|
#include "tegra-common-post.h"
|
|
|
|
/* Reserve top 1M for secure RAM */
|
|
#define CONFIG_ARMV7_SECURE_BASE 0xfff00000
|
|
#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000
|
|
|
|
#endif /* __CONFIG_H */
|