mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
d51e5aeff6
when porting u-boot to a new am43xx board, it helps to know the name of the current unsupported board so we don't have to hunt for design documents to figure out what's written in the EEPROM. Signed-off-by: Felipe Balbi <balbi@ti.com>
539 lines
13 KiB
C
539 lines
13 KiB
C
/*
|
|
* board.c
|
|
*
|
|
* Board functions for TI AM43XX based boards
|
|
*
|
|
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/errno.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/emif.h>
|
|
#include "board.h"
|
|
#include <power/tps65218.h>
|
|
#include <miiphy.h>
|
|
#include <cpsw.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
/*
|
|
* Read header information from EEPROM into global structure.
|
|
*/
|
|
static int read_eeprom(struct am43xx_board_id *header)
|
|
{
|
|
/* Check if baseboard eeprom is available */
|
|
if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
|
|
printf("Could not probe the EEPROM at 0x%x\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* read the eeprom using i2c */
|
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header,
|
|
sizeof(struct am43xx_board_id))) {
|
|
printf("Could not read the EEPROM\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (header->magic != 0xEE3355AA) {
|
|
/*
|
|
* read the eeprom using i2c again,
|
|
* but use only a 1 byte address
|
|
*/
|
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
|
|
sizeof(struct am43xx_board_id))) {
|
|
printf("Could not read the EEPROM at 0x%x\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR);
|
|
return -EIO;
|
|
}
|
|
|
|
if (header->magic != 0xEE3355AA) {
|
|
printf("Incorrect magic number (0x%x) in EEPROM\n",
|
|
header->magic);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
strncpy(am43xx_board_name, (char *)header->name, sizeof(header->name));
|
|
am43xx_board_name[sizeof(header->name)] = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
#define NUM_OPPS 6
|
|
|
|
const struct dpll_params dpll_mpu[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
|
|
{ /* 19.2 MHz */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 50 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 100 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP 120 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP TB */
|
|
{-1, -1, -1, -1, -1, -1, -1} /* OPP NT */
|
|
},
|
|
{ /* 24 MHz */
|
|
{300, 23, 1, -1, -1, -1, -1}, /* OPP 50 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
|
|
{600, 23, 1, -1, -1, -1, -1}, /* OPP 100 */
|
|
{720, 23, 1, -1, -1, -1, -1}, /* OPP 120 */
|
|
{800, 23, 1, -1, -1, -1, -1}, /* OPP TB */
|
|
{1000, 23, 1, -1, -1, -1, -1} /* OPP NT */
|
|
},
|
|
{ /* 25 MHz */
|
|
{300, 24, 1, -1, -1, -1, -1}, /* OPP 50 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
|
|
{600, 24, 1, -1, -1, -1, -1}, /* OPP 100 */
|
|
{720, 24, 1, -1, -1, -1, -1}, /* OPP 120 */
|
|
{800, 24, 1, -1, -1, -1, -1}, /* OPP TB */
|
|
{1000, 24, 1, -1, -1, -1, -1} /* OPP NT */
|
|
},
|
|
{ /* 26 MHz */
|
|
{300, 25, 1, -1, -1, -1, -1}, /* OPP 50 */
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
|
|
{600, 25, 1, -1, -1, -1, -1}, /* OPP 100 */
|
|
{720, 25, 1, -1, -1, -1, -1}, /* OPP 120 */
|
|
{800, 25, 1, -1, -1, -1, -1}, /* OPP TB */
|
|
{1000, 25, 1, -1, -1, -1, -1} /* OPP NT */
|
|
},
|
|
};
|
|
|
|
const struct dpll_params dpll_core[NUM_CRYSTAL_FREQ] = {
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{1000, 23, -1, -1, 10, 8, 4}, /* 24 MHz */
|
|
{1000, 24, -1, -1, 10, 8, 4}, /* 25 MHz */
|
|
{1000, 25, -1, -1, 10, 8, 4} /* 26 MHz */
|
|
};
|
|
|
|
const struct dpll_params dpll_per[NUM_CRYSTAL_FREQ] = {
|
|
{-1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
|
|
{960, 23, 5, -1, -1, -1, -1}, /* 24 MHz */
|
|
{960, 24, 5, -1, -1, -1, -1}, /* 25 MHz */
|
|
{960, 25, 5, -1, -1, -1, -1} /* 26 MHz */
|
|
};
|
|
|
|
const struct dpll_params epos_evm_dpll_ddr = {
|
|
266, 24, 1, -1, 1, -1, -1};
|
|
|
|
const struct dpll_params gp_evm_dpll_ddr = {
|
|
400, 23, 1, -1, 1, -1, -1};
|
|
|
|
const struct ctrl_ioregs ioregs_lpddr2 = {
|
|
.cm0ioctl = LPDDR2_ADDRCTRL_IOCTRL_VALUE,
|
|
.cm1ioctl = LPDDR2_ADDRCTRL_WD0_IOCTRL_VALUE,
|
|
.cm2ioctl = LPDDR2_ADDRCTRL_WD1_IOCTRL_VALUE,
|
|
.dt0ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
|
|
.dt1ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
|
|
.dt2ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
|
|
.dt3ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
|
|
.emif_sdram_config_ext = 0x1,
|
|
};
|
|
|
|
const struct emif_regs emif_regs_lpddr2 = {
|
|
.sdram_config = 0x808012BA,
|
|
.ref_ctrl = 0x0000040D,
|
|
.sdram_tim1 = 0xEA86B411,
|
|
.sdram_tim2 = 0x103A094A,
|
|
.sdram_tim3 = 0x0F6BA37F,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x50074BE4,
|
|
.temp_alert_config = 0x0,
|
|
.emif_rd_wr_lvl_rmp_win = 0x0,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x0,
|
|
.emif_rd_wr_lvl_ctl = 0x0,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E084006,
|
|
.emif_rd_wr_exec_thresh = 0x00000405,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x04010040,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00500050,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00500050,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x00500050,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x00500050
|
|
};
|
|
|
|
const u32 ext_phy_ctrl_const_base_lpddr2[] = {
|
|
0x00500050,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x40001000,
|
|
0x08102040
|
|
};
|
|
|
|
const struct ctrl_ioregs ioregs_ddr3 = {
|
|
.cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE,
|
|
.cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE,
|
|
.cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE,
|
|
.dt0ioctl = DDR3_DATA0_IOCTRL_VALUE,
|
|
.dt1ioctl = DDR3_DATA0_IOCTRL_VALUE,
|
|
.dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE,
|
|
.dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE,
|
|
.emif_sdram_config_ext = 0x0143,
|
|
};
|
|
|
|
const struct emif_regs ddr3_emif_regs_400Mhz = {
|
|
.sdram_config = 0x638413B2,
|
|
.ref_ctrl = 0x00000C30,
|
|
.sdram_tim1 = 0xEAAAD4DB,
|
|
.sdram_tim2 = 0x266B7FDA,
|
|
.sdram_tim3 = 0x107F8678,
|
|
.read_idle_ctrl = 0x00050000,
|
|
.zq_config = 0x50074BE4,
|
|
.temp_alert_config = 0x0,
|
|
.emif_ddr_phy_ctlr_1 = 0x0E004008,
|
|
.emif_ddr_ext_phy_ctrl_1 = 0x08020080,
|
|
.emif_ddr_ext_phy_ctrl_2 = 0x00400040,
|
|
.emif_ddr_ext_phy_ctrl_3 = 0x00400040,
|
|
.emif_ddr_ext_phy_ctrl_4 = 0x00400040,
|
|
.emif_ddr_ext_phy_ctrl_5 = 0x00400040,
|
|
.emif_rd_wr_lvl_rmp_win = 0x0,
|
|
.emif_rd_wr_lvl_rmp_ctl = 0x0,
|
|
.emif_rd_wr_lvl_ctl = 0x0,
|
|
.emif_rd_wr_exec_thresh = 0x00000405
|
|
};
|
|
|
|
const u32 ext_phy_ctrl_const_base_ddr3[] = {
|
|
0x00400040,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00350035,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00000000,
|
|
0x00340034,
|
|
0x00340034,
|
|
0x00340034,
|
|
0x00340034,
|
|
0x00340034,
|
|
0x0,
|
|
0x0,
|
|
0x40000000,
|
|
0x08102040
|
|
};
|
|
|
|
void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
|
|
{
|
|
if (board_is_eposevm()) {
|
|
*regs = ext_phy_ctrl_const_base_lpddr2;
|
|
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
|
|
} else if (board_is_gpevm()) {
|
|
*regs = ext_phy_ctrl_const_base_ddr3;
|
|
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
if (board_is_eposevm())
|
|
return &epos_evm_dpll_ddr;
|
|
else if (board_is_gpevm())
|
|
return &gp_evm_dpll_ddr;
|
|
|
|
printf(" Board '%s' not supported\n", am43xx_board_name);
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* get_sys_clk_index : returns the index of the sys_clk read from
|
|
* ctrl status register. This value is either
|
|
* read from efuse or sysboot pins.
|
|
*/
|
|
static u32 get_sys_clk_index(void)
|
|
{
|
|
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
|
|
u32 ind = readl(&ctrl->statusreg), src;
|
|
|
|
src = (ind & CTRL_CRYSTAL_FREQ_SRC_MASK) >> CTRL_CRYSTAL_FREQ_SRC_SHIFT;
|
|
if (src == CTRL_CRYSTAL_FREQ_SRC_EFUSE) /* Value read from EFUSE */
|
|
return ((ind & CTRL_CRYSTAL_FREQ_SELECTION_MASK) >>
|
|
CTRL_CRYSTAL_FREQ_SELECTION_SHIFT);
|
|
else /* Value read from SYS BOOT pins */
|
|
return ((ind & CTRL_SYSBOOT_15_14_MASK) >>
|
|
CTRL_SYSBOOT_15_14_SHIFT);
|
|
}
|
|
|
|
/*
|
|
* get_opp_offset:
|
|
* Returns the index for safest OPP of the device to boot.
|
|
* max_off: Index of the MAX OPP in DEV ATTRIBUTE register.
|
|
* min_off: Index of the MIN OPP in DEV ATTRIBUTE register.
|
|
* This data is read from dev_attribute register which is e-fused.
|
|
* A'1' in bit indicates OPP disabled and not available, a '0' indicates
|
|
* OPP available. Lowest OPP starts with min_off. So returning the
|
|
* bit with rightmost '0'.
|
|
*/
|
|
static int get_opp_offset(int max_off, int min_off)
|
|
{
|
|
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
|
|
int opp, offset, i;
|
|
|
|
/* Bits 0:11 are defined to be the MPU_MAX_FREQ */
|
|
opp = readl(&ctrl->dev_attr) & ~0xFFFFF000;
|
|
|
|
for (i = max_off; i >= min_off; i--) {
|
|
offset = opp & (1 << i);
|
|
if (!offset)
|
|
return i;
|
|
}
|
|
|
|
return min_off;
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_mpu_params(void)
|
|
{
|
|
int opp = get_opp_offset(DEV_ATTR_MAX_OFFSET, DEV_ATTR_MIN_OFFSET);
|
|
u32 ind = get_sys_clk_index();
|
|
|
|
return &dpll_mpu[ind][opp];
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_core_params(void)
|
|
{
|
|
int ind = get_sys_clk_index();
|
|
|
|
return &dpll_core[ind];
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_per_params(void)
|
|
{
|
|
int ind = get_sys_clk_index();
|
|
|
|
return &dpll_per[ind];
|
|
}
|
|
|
|
void scale_vcores(void)
|
|
{
|
|
const struct dpll_params *mpu_params;
|
|
int mpu_vdd;
|
|
struct am43xx_board_id header;
|
|
|
|
enable_i2c0_pin_mux();
|
|
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
|
if (read_eeprom(&header) < 0)
|
|
puts("Could not get board ID.\n");
|
|
|
|
/* Get the frequency */
|
|
mpu_params = get_dpll_mpu_params();
|
|
|
|
if (i2c_probe(TPS65218_CHIP_PM))
|
|
return;
|
|
|
|
if (mpu_params->m == 1000) {
|
|
mpu_vdd = TPS65218_DCDC_VOLT_SEL_1330MV;
|
|
} else if (mpu_params->m == 600) {
|
|
mpu_vdd = TPS65218_DCDC_VOLT_SEL_1100MV;
|
|
} else {
|
|
puts("Unknown MPU clock, not scaling\n");
|
|
return;
|
|
}
|
|
|
|
/* Set DCDC1 (CORE) voltage to 1.1V */
|
|
if (tps65218_voltage_update(TPS65218_DCDC1,
|
|
TPS65218_DCDC_VOLT_SEL_1100MV)) {
|
|
puts("tps65218_voltage_update failure\n");
|
|
return;
|
|
}
|
|
|
|
/* Set DCDC2 (MPU) voltage */
|
|
if (tps65218_voltage_update(TPS65218_DCDC2, mpu_vdd)) {
|
|
puts("tps65218_voltage_update failure\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
void set_uart_mux_conf(void)
|
|
{
|
|
enable_uart0_pin_mux();
|
|
}
|
|
|
|
void set_mux_conf_regs(void)
|
|
{
|
|
enable_board_pin_mux();
|
|
}
|
|
|
|
static void enable_vtt_regulator(void)
|
|
{
|
|
u32 temp;
|
|
|
|
/* enable module */
|
|
writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL);
|
|
|
|
/* enable output for GPIO5_7 */
|
|
writel(GPIO_SETDATAOUT(7),
|
|
AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT);
|
|
temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
|
|
temp = temp & ~(GPIO_OE_ENABLE(7));
|
|
writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
|
|
}
|
|
|
|
void sdram_init(void)
|
|
{
|
|
/*
|
|
* EPOS EVM has 1GB LPDDR2 connected to EMIF.
|
|
* GP EMV has 1GB DDR3 connected to EMIF
|
|
* along with VTT regulator.
|
|
*/
|
|
if (board_is_eposevm()) {
|
|
config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0);
|
|
} else if (board_is_gpevm()) {
|
|
enable_vtt_regulator();
|
|
config_ddr(0, &ioregs_ddr3, NULL, NULL,
|
|
&ddr3_emif_regs_400Mhz, 0);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
char safe_string[HDR_NAME_LEN + 1];
|
|
struct am43xx_board_id header;
|
|
|
|
if (read_eeprom(&header) < 0)
|
|
puts("Could not get board ID.\n");
|
|
|
|
/* Now set variables based on the header. */
|
|
strncpy(safe_string, (char *)header.name, sizeof(header.name));
|
|
safe_string[sizeof(header.name)] = 0;
|
|
setenv("board_name", safe_string);
|
|
|
|
strncpy(safe_string, (char *)header.version, sizeof(header.version));
|
|
safe_string[sizeof(header.version)] = 0;
|
|
setenv("board_rev", safe_string);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
|
|
|
static void cpsw_control(int enabled)
|
|
{
|
|
/* Additional controls can be added here */
|
|
return;
|
|
}
|
|
|
|
static struct cpsw_slave_data cpsw_slaves[] = {
|
|
{
|
|
.slave_reg_ofs = 0x208,
|
|
.sliver_reg_ofs = 0xd80,
|
|
.phy_addr = 16,
|
|
},
|
|
{
|
|
.slave_reg_ofs = 0x308,
|
|
.sliver_reg_ofs = 0xdc0,
|
|
.phy_addr = 1,
|
|
},
|
|
};
|
|
|
|
static struct cpsw_platform_data cpsw_data = {
|
|
.mdio_base = CPSW_MDIO_BASE,
|
|
.cpsw_base = CPSW_BASE,
|
|
.mdio_div = 0xff,
|
|
.channels = 8,
|
|
.cpdma_reg_ofs = 0x800,
|
|
.slaves = 1,
|
|
.slave_data = cpsw_slaves,
|
|
.ale_reg_ofs = 0xd00,
|
|
.ale_entries = 1024,
|
|
.host_port_reg_ofs = 0x108,
|
|
.hw_stats_reg_ofs = 0x900,
|
|
.bd_ram_ofs = 0x2000,
|
|
.mac_control = (1 << 5),
|
|
.control = cpsw_control,
|
|
.host_port_num = 0,
|
|
.version = CPSW_CTRL_VERSION_2,
|
|
};
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rv;
|
|
uint8_t mac_addr[6];
|
|
uint32_t mac_hi, mac_lo;
|
|
|
|
/* try reading mac address from efuse */
|
|
mac_lo = readl(&cdev->macid0l);
|
|
mac_hi = readl(&cdev->macid0h);
|
|
mac_addr[0] = mac_hi & 0xFF;
|
|
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
|
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
|
|
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
|
|
mac_addr[4] = mac_lo & 0xFF;
|
|
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
|
|
|
|
if (!getenv("ethaddr")) {
|
|
puts("<ethaddr> not set. Validating first E-fuse MAC\n");
|
|
if (is_valid_ether_addr(mac_addr))
|
|
eth_setenv_enetaddr("ethaddr", mac_addr);
|
|
}
|
|
|
|
mac_lo = readl(&cdev->macid1l);
|
|
mac_hi = readl(&cdev->macid1h);
|
|
mac_addr[0] = mac_hi & 0xFF;
|
|
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
|
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
|
|
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
|
|
mac_addr[4] = mac_lo & 0xFF;
|
|
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
|
|
|
|
if (!getenv("eth1addr")) {
|
|
if (is_valid_ether_addr(mac_addr))
|
|
eth_setenv_enetaddr("eth1addr", mac_addr);
|
|
}
|
|
|
|
if (board_is_eposevm()) {
|
|
writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
|
|
cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
|
|
cpsw_slaves[0].phy_addr = 16;
|
|
} else {
|
|
writel(RGMII_MODE_ENABLE, &cdev->miisel);
|
|
cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
|
|
cpsw_slaves[0].phy_addr = 0;
|
|
}
|
|
|
|
rv = cpsw_register(&cpsw_data);
|
|
if (rv < 0)
|
|
printf("Error %d registering CPSW switch\n", rv);
|
|
|
|
return rv;
|
|
}
|
|
#endif
|