mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
fdce9d35dc
This patch synchronizes the am33xx SoC specific files with those from Linux 4.20.0. Hence all board maintainers of am33xx based boards are on the cc list. The main purpose of this patch is to prevent further diverging of the dts files from U-Boot and those from Linux. It aims to set the stage for the synchronization of board specific dts files. Example: I'm the maintainer of the PDU001 board: once this patch is applied successfully I will make changes to the board specific dts file in Linux only and then post a patch with a copy of this exact dts file to U-Boot. This will make U-Boot and Linux remain in sync. The stumbling block of https://patchwork.ozlabs.org/patch/943627 was removed by the patch https://patchwork.ozlabs.org/patch/962428 from Lokesh Vutla (many thanks!). This omap-serial driver allows using the Linux am33xx.dtsi file in U-Boot. Other changes to dts and dtsi files made by this patch are mainly to prevent _new_ warnings during the build process. Especially the warning at pinmux@800 stating 'unnecessary #address-cells/#size-cells without "ranges" or child "reg"' was not removed. This warning is a good example showing the benefit of the synchronization: if it needs to be fixed it will be fixed in Linux and ported back to U-Boot. Buildman reports all 46 am33xx SoC based boards to build fine, with warnings of course. Nevertheless this patch should be tested thoroughly on as many boards as possible to prevent any collateral damage. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com>
514 lines
12 KiB
Text
514 lines
12 KiB
Text
/*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/omap.h>
|
|
|
|
/ {
|
|
compatible = "ti,dm816";
|
|
interrupt-parent = <&intc>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
chosen { };
|
|
|
|
aliases {
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
ethernet0 = ð0;
|
|
ethernet1 = ð1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a8";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a8-pmu";
|
|
interrupts = <3>;
|
|
};
|
|
|
|
/*
|
|
* The soc node represents the soc top level view. It is used for IPs
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
|
*/
|
|
soc {
|
|
compatible = "ti,omap-infra";
|
|
mpu {
|
|
compatible = "ti,omap3-mpu";
|
|
ti,hwmods = "mpu";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* XXX: Use a flat representation of the dm816x interconnect.
|
|
* The real dm816x interconnect network is quite complex. Since
|
|
* it will not bring real advantage to represent that in DT
|
|
* for the moment, just use a fake OCP bus entry to represent
|
|
* the whole bus hierarchy.
|
|
*/
|
|
ocp {
|
|
compatible = "simple-bus";
|
|
reg = <0x44000000 0x10000>;
|
|
interrupts = <9 10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
prcm: prcm@48180000 {
|
|
compatible = "ti,dm816-prcm";
|
|
reg = <0x48180000 0x4000>;
|
|
|
|
prcm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
prcm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
scrm: scrm@48140000 {
|
|
compatible = "ti,dm816-scrm", "simple-bus";
|
|
reg = <0x48140000 0x21000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#pinctrl-cells = <1>;
|
|
ranges = <0 0x48140000 0x21000>;
|
|
|
|
dm816x_pinmux: pinmux@800 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x800 0x50a>;
|
|
#pinctrl-cells = <1>;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xf>;
|
|
};
|
|
|
|
/* Device Configuration Registers */
|
|
scm_conf: syscon@600 {
|
|
compatible = "syscon", "simple-bus";
|
|
reg = <0x600 0x110>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x600 0x110>;
|
|
|
|
usb_phy0: usb-phy@20 {
|
|
compatible = "ti,dm8168-usb-phy";
|
|
reg = <0x20 0x8>;
|
|
reg-names = "phy";
|
|
clocks = <&main_fapll 6>;
|
|
clock-names = "refclk";
|
|
#phy-cells = <0>;
|
|
syscon = <&scm_conf>;
|
|
};
|
|
|
|
usb_phy1: usb-phy@28 {
|
|
compatible = "ti,dm8168-usb-phy";
|
|
reg = <0x28 0x8>;
|
|
reg-names = "phy";
|
|
clocks = <&main_fapll 6>;
|
|
clock-names = "refclk";
|
|
#phy-cells = <0>;
|
|
syscon = <&scm_conf>;
|
|
};
|
|
};
|
|
|
|
scrm_clocks: clocks {
|
|
};
|
|
|
|
scrm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
|
|
edma: edma@49000000 {
|
|
compatible = "ti,edma3";
|
|
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
|
|
reg = <0x49000000 0x10000>,
|
|
<0x44e10f90 0x40>;
|
|
interrupts = <12 13 14>;
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
elm: elm@48080000 {
|
|
compatible = "ti,816-elm";
|
|
ti,hwmods = "elm";
|
|
reg = <0x48080000 0x2000>;
|
|
interrupts = <4>;
|
|
};
|
|
|
|
gpio1: gpio@48032000 {
|
|
compatible = "ti,omap4-gpio";
|
|
ti,hwmods = "gpio1";
|
|
ti,gpio-always-on;
|
|
reg = <0x48032000 0x1000>;
|
|
interrupts = <96>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@4804c000 {
|
|
compatible = "ti,omap4-gpio";
|
|
ti,hwmods = "gpio2";
|
|
ti,gpio-always-on;
|
|
reg = <0x4804c000 0x1000>;
|
|
interrupts = <98>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpmc: gpmc@50000000 {
|
|
compatible = "ti,am3352-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
reg = <0x50000000 0x2000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
interrupts = <100>;
|
|
dmas = <&edma 52>;
|
|
dma-names = "rxtx";
|
|
gpmc,num-cs = <6>;
|
|
gpmc,num-waitpins = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
i2c1: i2c@48028000 {
|
|
compatible = "ti,omap4-i2c";
|
|
ti,hwmods = "i2c1";
|
|
reg = <0x48028000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <70>;
|
|
dmas = <&edma 58 &edma 59>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
i2c2: i2c@4802a000 {
|
|
compatible = "ti,omap4-i2c";
|
|
ti,hwmods = "i2c2";
|
|
reg = <0x4802a000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <71>;
|
|
dmas = <&edma 60 &edma 61>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
intc: interrupt-controller@48200000 {
|
|
compatible = "ti,dm816-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x48200000 0x1000>;
|
|
};
|
|
|
|
rtc: rtc@480c0000 {
|
|
compatible = "ti,am3352-rtc", "ti,da830-rtc";
|
|
reg = <0x480c0000 0x1000>;
|
|
interrupts = <75 76>;
|
|
ti,hwmods = "rtc";
|
|
};
|
|
|
|
mailbox: mailbox@480c8000 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x480c8000 0x2000>;
|
|
interrupts = <77>;
|
|
ti,hwmods = "mailbox";
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <12>;
|
|
mbox_dsp: mbox_dsp {
|
|
ti,mbox-tx = <3 0 0>;
|
|
ti,mbox-rx = <0 0 0>;
|
|
};
|
|
};
|
|
|
|
spinbox: spinbox@480ca000 {
|
|
compatible = "ti,omap4-hwspinlock";
|
|
reg = <0x480ca000 0x2000>;
|
|
ti,hwmods = "spinbox";
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
mdio: mdio@4a100800 {
|
|
compatible = "ti,davinci_mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x4a100800 0x100>;
|
|
ti,hwmods = "davinci_mdio";
|
|
bus_freq = <1000000>;
|
|
phy0: ethernet-phy@0 {
|
|
reg = <1>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
eth0: ethernet@4a100000 {
|
|
compatible = "ti,dm816-emac";
|
|
ti,hwmods = "emac0";
|
|
reg = <0x4a100000 0x800
|
|
0x4a100900 0x3700>;
|
|
clocks = <&sysclk24_ck>;
|
|
syscon = <&scm_conf>;
|
|
ti,davinci-ctrl-reg-offset = <0>;
|
|
ti,davinci-ctrl-mod-reg-offset = <0x900>;
|
|
ti,davinci-ctrl-ram-offset = <0x2000>;
|
|
ti,davinci-ctrl-ram-size = <0x2000>;
|
|
interrupts = <40 41 42 43>;
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
eth1: ethernet@4a120000 {
|
|
compatible = "ti,dm816-emac";
|
|
ti,hwmods = "emac1";
|
|
reg = <0x4a120000 0x4000>;
|
|
clocks = <&sysclk24_ck>;
|
|
syscon = <&scm_conf>;
|
|
ti,davinci-ctrl-reg-offset = <0>;
|
|
ti,davinci-ctrl-mod-reg-offset = <0x900>;
|
|
ti,davinci-ctrl-ram-offset = <0x2000>;
|
|
ti,davinci-ctrl-ram-size = <0x2000>;
|
|
interrupts = <44 45 46 47>;
|
|
phy-handle = <&phy1>;
|
|
};
|
|
|
|
mcspi1: spi@48030000 {
|
|
compatible = "ti,omap4-mcspi";
|
|
reg = <0x48030000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <65>;
|
|
ti,spi-num-cs = <4>;
|
|
ti,hwmods = "mcspi1";
|
|
dmas = <&edma 16 &edma 17
|
|
&edma 18 &edma 19
|
|
&edma 20 &edma 21
|
|
&edma 22 &edma 23>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1",
|
|
"tx2", "rx2", "tx3", "rx3";
|
|
};
|
|
|
|
mmc1: mmc@48060000 {
|
|
compatible = "ti,omap4-hsmmc";
|
|
reg = <0x48060000 0x11000>;
|
|
ti,hwmods = "mmc1";
|
|
interrupts = <64>;
|
|
dmas = <&edma 24 &edma 25>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
timer1: timer@4802e000 {
|
|
compatible = "ti,dm816-timer";
|
|
reg = <0x4802e000 0x2000>;
|
|
interrupts = <67>;
|
|
ti,hwmods = "timer1";
|
|
ti,timer-alwon;
|
|
};
|
|
|
|
timer2: timer@48040000 {
|
|
compatible = "ti,dm816-timer";
|
|
reg = <0x48040000 0x2000>;
|
|
interrupts = <68>;
|
|
ti,hwmods = "timer2";
|
|
};
|
|
|
|
timer3: timer@48042000 {
|
|
compatible = "ti,dm816-timer";
|
|
reg = <0x48042000 0x2000>;
|
|
interrupts = <69>;
|
|
ti,hwmods = "timer3";
|
|
};
|
|
|
|
timer4: timer@48044000 {
|
|
compatible = "ti,dm816-timer";
|
|
reg = <0x48044000 0x2000>;
|
|
interrupts = <92>;
|
|
ti,hwmods = "timer4";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer5: timer@48046000 {
|
|
compatible = "ti,dm816-timer";
|
|
reg = <0x48046000 0x2000>;
|
|
interrupts = <93>;
|
|
ti,hwmods = "timer5";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer6: timer@48048000 {
|
|
compatible = "ti,dm816-timer";
|
|
reg = <0x48048000 0x2000>;
|
|
interrupts = <94>;
|
|
ti,hwmods = "timer6";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer7: timer@4804a000 {
|
|
compatible = "ti,dm816-timer";
|
|
reg = <0x4804a000 0x2000>;
|
|
interrupts = <95>;
|
|
ti,hwmods = "timer7";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
uart1: uart@48020000 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
ti,hwmods = "uart1";
|
|
reg = <0x48020000 0x2000>;
|
|
clock-frequency = <48000000>;
|
|
interrupts = <72>;
|
|
dmas = <&edma 26 &edma 27>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
uart2: uart@48022000 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
ti,hwmods = "uart2";
|
|
reg = <0x48022000 0x2000>;
|
|
clock-frequency = <48000000>;
|
|
interrupts = <73>;
|
|
dmas = <&edma 28 &edma 29>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
uart3: uart@48024000 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
ti,hwmods = "uart3";
|
|
reg = <0x48024000 0x2000>;
|
|
clock-frequency = <48000000>;
|
|
interrupts = <74>;
|
|
dmas = <&edma 30 &edma 31>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
/* NOTE: USB needs a transceiver driver for phys to work */
|
|
usb: usb_otg_hs@47401000 {
|
|
compatible = "ti,am33xx-usb";
|
|
reg = <0x47401000 0x400000>;
|
|
ranges;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ti,hwmods = "usb_otg_hs";
|
|
|
|
usb0: usb@47401000 {
|
|
compatible = "ti,musb-dm816";
|
|
reg = <0x47401400 0x400
|
|
0x47401000 0x200>;
|
|
reg-names = "mc", "control";
|
|
interrupts = <18>;
|
|
interrupt-names = "mc";
|
|
dr_mode = "host";
|
|
interface-type = <0>;
|
|
phys = <&usb_phy0>;
|
|
phy-names = "usb2-phy";
|
|
mentor,multipoint = <1>;
|
|
mentor,num-eps = <16>;
|
|
mentor,ram-bits = <12>;
|
|
mentor,power = <500>;
|
|
|
|
dmas = <&cppi41dma 0 0 &cppi41dma 1 0
|
|
&cppi41dma 2 0 &cppi41dma 3 0
|
|
&cppi41dma 4 0 &cppi41dma 5 0
|
|
&cppi41dma 6 0 &cppi41dma 7 0
|
|
&cppi41dma 8 0 &cppi41dma 9 0
|
|
&cppi41dma 10 0 &cppi41dma 11 0
|
|
&cppi41dma 12 0 &cppi41dma 13 0
|
|
&cppi41dma 14 0 &cppi41dma 0 1
|
|
&cppi41dma 1 1 &cppi41dma 2 1
|
|
&cppi41dma 3 1 &cppi41dma 4 1
|
|
&cppi41dma 5 1 &cppi41dma 6 1
|
|
&cppi41dma 7 1 &cppi41dma 8 1
|
|
&cppi41dma 9 1 &cppi41dma 10 1
|
|
&cppi41dma 11 1 &cppi41dma 12 1
|
|
&cppi41dma 13 1 &cppi41dma 14 1>;
|
|
dma-names =
|
|
"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
|
|
"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
|
|
"rx14", "rx15",
|
|
"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
|
|
"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
|
|
"tx14", "tx15";
|
|
};
|
|
|
|
usb1: usb@47401800 {
|
|
compatible = "ti,musb-dm816";
|
|
reg = <0x47401c00 0x400
|
|
0x47401800 0x200>;
|
|
reg-names = "mc", "control";
|
|
interrupts = <19>;
|
|
interrupt-names = "mc";
|
|
dr_mode = "host";
|
|
interface-type = <0>;
|
|
phys = <&usb_phy1>;
|
|
phy-names = "usb2-phy";
|
|
mentor,multipoint = <1>;
|
|
mentor,num-eps = <16>;
|
|
mentor,ram-bits = <12>;
|
|
mentor,power = <500>;
|
|
|
|
dmas = <&cppi41dma 15 0 &cppi41dma 16 0
|
|
&cppi41dma 17 0 &cppi41dma 18 0
|
|
&cppi41dma 19 0 &cppi41dma 20 0
|
|
&cppi41dma 21 0 &cppi41dma 22 0
|
|
&cppi41dma 23 0 &cppi41dma 24 0
|
|
&cppi41dma 25 0 &cppi41dma 26 0
|
|
&cppi41dma 27 0 &cppi41dma 28 0
|
|
&cppi41dma 29 0 &cppi41dma 15 1
|
|
&cppi41dma 16 1 &cppi41dma 17 1
|
|
&cppi41dma 18 1 &cppi41dma 19 1
|
|
&cppi41dma 20 1 &cppi41dma 21 1
|
|
&cppi41dma 22 1 &cppi41dma 23 1
|
|
&cppi41dma 24 1 &cppi41dma 25 1
|
|
&cppi41dma 26 1 &cppi41dma 27 1
|
|
&cppi41dma 28 1 &cppi41dma 29 1>;
|
|
dma-names =
|
|
"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
|
|
"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
|
|
"rx14", "rx15",
|
|
"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
|
|
"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
|
|
"tx14", "tx15";
|
|
};
|
|
|
|
cppi41dma: dma-controller@47402000 {
|
|
compatible = "ti,am3359-cppi41";
|
|
reg = <0x47400000 0x1000
|
|
0x47402000 0x1000
|
|
0x47403000 0x1000
|
|
0x47404000 0x4000>;
|
|
reg-names = "glue", "controller", "scheduler", "queuemgr";
|
|
interrupts = <17>;
|
|
interrupt-names = "glue";
|
|
#dma-cells = <2>;
|
|
#dma-channels = <30>;
|
|
#dma-requests = <256>;
|
|
};
|
|
};
|
|
|
|
wd_timer2: wd_timer@480c2000 {
|
|
compatible = "ti,omap3-wdt";
|
|
ti,hwmods = "wd_timer";
|
|
reg = <0x480c2000 0x1000>;
|
|
interrupts = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "dm816x-clocks.dtsi"
|