mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 09:30:10 +00:00
7f3f2bd2dc
The PCI ID select values on the Arcadia main board differ depending on the version of the hardware. The standard configuration supports Rev 3.1. The legacy target supports Rev 2.x. Signed-off-by Randy Vinson <rvinson@mvista.com>
242 lines
6.4 KiB
C
242 lines
6.4 KiB
C
/*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* Copyright (C) 2003 Motorola Inc.
|
|
* Xianghua Xiao (x.xiao@motorola.com)
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* PCI Configuration space access support for MPC85xx PCI Bridge
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/cpm_85xx.h>
|
|
#include <pci.h>
|
|
|
|
#if defined(CONFIG_OF_FLAT_TREE)
|
|
#include <ft_build.h>
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
static struct pci_controller *pci_hose;
|
|
|
|
void
|
|
pci_mpc85xx_init(struct pci_controller *board_hose)
|
|
{
|
|
u16 reg16;
|
|
u32 dev;
|
|
|
|
volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
|
|
volatile ccsr_pcix_t *pcix = &immap->im_pcix;
|
|
#ifdef CONFIG_MPC85XX_PCI2
|
|
volatile ccsr_pcix_t *pcix2 = &immap->im_pcix2;
|
|
#endif
|
|
volatile ccsr_gur_t *gur = &immap->im_gur;
|
|
struct pci_controller * hose;
|
|
|
|
pci_hose = board_hose;
|
|
|
|
hose = &pci_hose[0];
|
|
|
|
hose->first_busno = 0;
|
|
hose->last_busno = 0xff;
|
|
|
|
pci_setup_indirect(hose,
|
|
(CFG_IMMR+0x8000),
|
|
(CFG_IMMR+0x8004));
|
|
|
|
/*
|
|
* Hose scan.
|
|
*/
|
|
dev = PCI_BDF(hose->first_busno, 0, 0);
|
|
pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Clear non-reserved bits in status register.
|
|
*/
|
|
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
|
|
|
|
if (!(gur->pordevsr & PORDEVSR_PCI)) {
|
|
/* PCI-X init */
|
|
if (CONFIG_SYS_CLK_FREQ < 66000000)
|
|
printf("PCI-X will only work at 66 MHz\n");
|
|
|
|
reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
|
|
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
|
|
pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
|
|
}
|
|
|
|
pcix->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
|
|
pcix->potear1 = 0x00000000;
|
|
pcix->powbar1 = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff;
|
|
pcix->powbear1 = 0x00000000;
|
|
pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
|
|
POWAR_MEM_WRITE | (__ilog2(CFG_PCI1_MEM_SIZE) - 1));
|
|
|
|
pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
|
|
pcix->potear2 = 0x00000000;
|
|
pcix->powbar2 = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff;
|
|
pcix->powbear2 = 0x00000000;
|
|
pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
|
|
POWAR_IO_WRITE | (__ilog2(CFG_PCI1_IO_SIZE) - 1));
|
|
|
|
pcix->pitar1 = 0x00000000;
|
|
pcix->piwbar1 = 0x00000000;
|
|
pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
|
|
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
|
|
|
|
pcix->powar3 = 0;
|
|
pcix->powar4 = 0;
|
|
pcix->piwar2 = 0;
|
|
pcix->piwar3 = 0;
|
|
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI1_MEM_BASE,
|
|
CFG_PCI1_MEM_PHYS,
|
|
CFG_PCI1_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCI1_IO_BASE,
|
|
CFG_PCI1_IO_PHYS,
|
|
CFG_PCI1_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 2;
|
|
|
|
pci_register_hose(hose);
|
|
|
|
#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
|
|
/*
|
|
* This is a SW workaround for an apparent HW problem
|
|
* in the PCI controller on the MPC85555/41 CDS boards.
|
|
* The first config cycle must be to a valid, known
|
|
* device on the PCI bus in order to trick the PCI
|
|
* controller state machine into a known valid state.
|
|
* Without this, the first config cycle has the chance
|
|
* of hanging the controller permanently, just leaving
|
|
* it in a semi-working state, or leaving it working.
|
|
*
|
|
* Pick on the Tundra, Device 17, to get it right.
|
|
*/
|
|
{
|
|
u8 header_type;
|
|
|
|
pci_hose_read_config_byte(hose,
|
|
PCI_BDF(0,BRIDGE_ID,0),
|
|
PCI_HEADER_TYPE,
|
|
&header_type);
|
|
}
|
|
#endif
|
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
|
|
#ifdef CONFIG_MPC85XX_PCI2
|
|
hose = &pci_hose[1];
|
|
|
|
hose->first_busno = pci_hose[0].last_busno + 1;
|
|
hose->last_busno = 0xff;
|
|
|
|
pci_setup_indirect(hose,
|
|
(CFG_IMMR+0x9000),
|
|
(CFG_IMMR+0x9004));
|
|
|
|
dev = PCI_BDF(hose->first_busno, 0, 0);
|
|
pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Clear non-reserved bits in status register.
|
|
*/
|
|
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
|
|
|
|
pcix2->potar1 = (CFG_PCI2_MEM_BASE >> 12) & 0x000fffff;
|
|
pcix2->potear1 = 0x00000000;
|
|
pcix2->powbar1 = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff;
|
|
pcix2->powbear1 = 0x00000000;
|
|
pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
|
|
POWAR_MEM_WRITE | (__ilog2(CFG_PCI2_MEM_SIZE) - 1));
|
|
|
|
pcix2->potar2 = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff;
|
|
pcix2->potear2 = 0x00000000;
|
|
pcix2->powbar2 = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff;
|
|
pcix2->powbear2 = 0x00000000;
|
|
pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
|
|
POWAR_IO_WRITE | (__ilog2(CFG_PCI2_IO_SIZE) - 1));
|
|
|
|
pcix2->pitar1 = 0x00000000;
|
|
pcix2->piwbar1 = 0x00000000;
|
|
pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
|
|
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
|
|
|
|
pcix2->powar3 = 0;
|
|
pcix2->powar4 = 0;
|
|
pcix2->piwar2 = 0;
|
|
pcix2->piwar3 = 0;
|
|
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI2_MEM_BASE,
|
|
CFG_PCI2_MEM_PHYS,
|
|
CFG_PCI2_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCI2_IO_BASE,
|
|
CFG_PCI2_IO_PHYS,
|
|
CFG_PCI2_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 2;
|
|
|
|
/*
|
|
* Hose scan.
|
|
*/
|
|
pci_register_hose(hose);
|
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_OF_FLAT_TREE
|
|
void
|
|
ft_pci_setup(void *blob, bd_t *bd)
|
|
{
|
|
u32 *p;
|
|
int len;
|
|
|
|
p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
|
|
if (p != NULL) {
|
|
p[0] = pci_hose[0].first_busno;
|
|
p[1] = pci_hose[0].last_busno;
|
|
}
|
|
|
|
#ifdef CONFIG_MPC85XX_PCI2
|
|
p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len);
|
|
if (p != NULL) {
|
|
p[0] = pci_hose[1].first_busno;
|
|
p[1] = pci_hose[1].last_busno;
|
|
}
|
|
#endif
|
|
}
|
|
#endif /* CONFIG_OF_FLAT_TREE */
|
|
#endif /* CONFIG_PCI */
|