u-boot/board/keymile/secu1/socfpga_secu.env
Holger Brunck 3bcf9c08a3 board/km/secu: migrate to use environment text files
Instead of having these defines in a header file, move them to
a simple text file.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2022-12-12 16:49:25 -05:00

50 lines
1.4 KiB
Bash

altbootcmd=run bootcmd;
bootlimit=6
bootnum=1
bootretry=CONFIG_BOOT_RETRY_TIME
develop=tftp 0x200000 scripts/develop-secu.txt &&
env import -t 0x200000 ${filesize} &&
saveenv &&
reset
fdt_addr=CONFIG_KM_FDT_ADDR
load=tftpboot ${loadaddr} u-boot-with-nand-spl.sfp
loadaddr=CONFIG_KM_KERNEL_ADDR
newenv=nand erase 0x100000 0x40000
release=run newenv; reset
socfpga_legacy_reset_compat=1
update=nand erase 0x0 0x00100000 && nand write ${loadaddr} 0x0 ${filesize}
userload=ubi part nand.ubi &&
ubi check rootfs$bootnum &&
ubi read $fdt_addr dtb$bootnum &&
ubi read $loadaddr kernel$bootnum
userboot=setenv bootargs console=ttyS0,115200 ubi.fm_autoconvert=1 uio_pdrv_genirq.of_id="idq,regbank"
ubi.mtd=1 ubi.block=0,rootfs$bootnum root=/dev/ubiblock0_$ubivolid ro
rootfstype=squashfs init=sbin/preinit;
bootz ${loadaddr} - ${fdt_addr}
verify=y
/*
* FPGA Remote Update related environment
*
* Note that since those commands access the FPGA, the HPS-to-FPGA bridges
* MUST have been previously enabled (for example with 'bridge enable').
*/
rmtu_page=0xFF29000C
rmtu_reconfig=0xFF290018
fpga_safebase=0x0
fpga_userbase=0x2000000
_fpga_loaduser=echo "Loading FPGA USER image..." &&
mw ${rmtu_page} ${fpga_userbase} &&
mw ${rmtu_reconfig} 1
_fpga_loadsafe=echo "Loading FPGA SAFE image..." &&
mw ${rmtu_page} ${fpga_safebase} &&
mw ${rmtu_reconfig} 1