mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
469 lines
12 KiB
C
469 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* spi driver for rockchip
|
|
*
|
|
* (C) Copyright 2015 Google, Inc
|
|
*
|
|
* (C) Copyright 2008-2013 Rockchip Electronics
|
|
* Peter, Software Engineering, <superpeter.cai@gmail.com>.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <errno.h>
|
|
#include <spi.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/periph.h>
|
|
#include <dm/pinctrl.h>
|
|
#include "rk_spi.h"
|
|
|
|
/* Change to 1 to output registers at the start of each transaction */
|
|
#define DEBUG_RK_SPI 0
|
|
|
|
struct rockchip_spi_platdata {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_rockchip_rk3288_spi of_plat;
|
|
#endif
|
|
s32 frequency; /* Default clock frequency, -1 for none */
|
|
fdt_addr_t base;
|
|
uint deactivate_delay_us; /* Delay to wait after deactivate */
|
|
uint activate_delay_us; /* Delay to wait after activate */
|
|
};
|
|
|
|
struct rockchip_spi_priv {
|
|
struct rockchip_spi *regs;
|
|
struct clk clk;
|
|
unsigned int max_freq;
|
|
unsigned int mode;
|
|
ulong last_transaction_us; /* Time of last transaction end */
|
|
u8 bits_per_word; /* max 16 bits per word */
|
|
u8 n_bytes;
|
|
unsigned int speed_hz;
|
|
unsigned int last_speed_hz;
|
|
unsigned int tmode;
|
|
uint input_rate;
|
|
};
|
|
|
|
#define SPI_FIFO_DEPTH 32
|
|
|
|
static void rkspi_dump_regs(struct rockchip_spi *regs)
|
|
{
|
|
debug("ctrl0: \t\t0x%08x\n", readl(®s->ctrlr0));
|
|
debug("ctrl1: \t\t0x%08x\n", readl(®s->ctrlr1));
|
|
debug("ssienr: \t\t0x%08x\n", readl(®s->enr));
|
|
debug("ser: \t\t0x%08x\n", readl(®s->ser));
|
|
debug("baudr: \t\t0x%08x\n", readl(®s->baudr));
|
|
debug("txftlr: \t\t0x%08x\n", readl(®s->txftlr));
|
|
debug("rxftlr: \t\t0x%08x\n", readl(®s->rxftlr));
|
|
debug("txflr: \t\t0x%08x\n", readl(®s->txflr));
|
|
debug("rxflr: \t\t0x%08x\n", readl(®s->rxflr));
|
|
debug("sr: \t\t0x%08x\n", readl(®s->sr));
|
|
debug("imr: \t\t0x%08x\n", readl(®s->imr));
|
|
debug("isr: \t\t0x%08x\n", readl(®s->isr));
|
|
debug("dmacr: \t\t0x%08x\n", readl(®s->dmacr));
|
|
debug("dmatdlr: \t0x%08x\n", readl(®s->dmatdlr));
|
|
debug("dmardlr: \t0x%08x\n", readl(®s->dmardlr));
|
|
}
|
|
|
|
static void rkspi_enable_chip(struct rockchip_spi *regs, bool enable)
|
|
{
|
|
writel(enable ? 1 : 0, ®s->enr);
|
|
}
|
|
|
|
static void rkspi_set_clk(struct rockchip_spi_priv *priv, uint speed)
|
|
{
|
|
/*
|
|
* We should try not to exceed the speed requested by the caller:
|
|
* when selecting a divider, we need to make sure we round up.
|
|
*/
|
|
uint clk_div = DIV_ROUND_UP(priv->input_rate, speed);
|
|
|
|
/* The baudrate register (BAUDR) is defined as a 32bit register where
|
|
* the upper 16bit are reserved and having 'Fsclk_out' in the lower
|
|
* 16bits with 'Fsclk_out' defined as follows:
|
|
*
|
|
* Fsclk_out = Fspi_clk/ SCKDV
|
|
* Where SCKDV is any even value between 2 and 65534.
|
|
*/
|
|
if (clk_div > 0xfffe) {
|
|
clk_div = 0xfffe;
|
|
debug("%s: can't divide down to %d Hz (actual will be %d Hz)\n",
|
|
__func__, speed, priv->input_rate / clk_div);
|
|
}
|
|
|
|
/* Round up to the next even 16bit number */
|
|
clk_div = (clk_div + 1) & 0xfffe;
|
|
|
|
debug("spi speed %u, div %u\n", speed, clk_div);
|
|
|
|
clrsetbits_le32(&priv->regs->baudr, 0xffff, clk_div);
|
|
priv->last_speed_hz = speed;
|
|
}
|
|
|
|
static int rkspi_wait_till_not_busy(struct rockchip_spi *regs)
|
|
{
|
|
unsigned long start;
|
|
|
|
start = get_timer(0);
|
|
while (readl(®s->sr) & SR_BUSY) {
|
|
if (get_timer(start) > ROCKCHIP_SPI_TIMEOUT_MS) {
|
|
debug("RK SPI: Status keeps busy for 1000us after a read/write!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spi_cs_activate(struct udevice *dev, uint cs)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_platdata *plat = bus->platdata;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
struct rockchip_spi *regs = priv->regs;
|
|
|
|
/* If it's too soon to do another transaction, wait */
|
|
if (plat->deactivate_delay_us && priv->last_transaction_us) {
|
|
ulong delay_us; /* The delay completed so far */
|
|
delay_us = timer_get_us() - priv->last_transaction_us;
|
|
if (delay_us < plat->deactivate_delay_us)
|
|
udelay(plat->deactivate_delay_us - delay_us);
|
|
}
|
|
|
|
debug("activate cs%u\n", cs);
|
|
writel(1 << cs, ®s->ser);
|
|
if (plat->activate_delay_us)
|
|
udelay(plat->activate_delay_us);
|
|
}
|
|
|
|
static void spi_cs_deactivate(struct udevice *dev, uint cs)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_platdata *plat = bus->platdata;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
struct rockchip_spi *regs = priv->regs;
|
|
|
|
debug("deactivate cs%u\n", cs);
|
|
writel(0, ®s->ser);
|
|
|
|
/* Remember time of this transaction so we can honour the bus delay */
|
|
if (plat->deactivate_delay_us)
|
|
priv->last_transaction_us = timer_get_us();
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
static int conv_of_platdata(struct udevice *dev)
|
|
{
|
|
struct rockchip_spi_platdata *plat = dev->platdata;
|
|
struct dtd_rockchip_rk3288_spi *dtplat = &plat->of_plat;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
plat->base = dtplat->reg[0];
|
|
plat->frequency = 20000000;
|
|
ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
dev->req_seq = 0;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int rockchip_spi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
plat->base = dev_read_addr(bus);
|
|
|
|
ret = clk_get_by_index(bus, 0, &priv->clk);
|
|
if (ret < 0) {
|
|
debug("%s: Could not get clock for %s: %d\n", __func__,
|
|
bus->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
plat->frequency =
|
|
dev_read_u32_default(bus, "spi-max-frequency", 50000000);
|
|
plat->deactivate_delay_us =
|
|
dev_read_u32_default(bus, "spi-deactivate-delay", 0);
|
|
plat->activate_delay_us =
|
|
dev_read_u32_default(bus, "spi-activate-delay", 0);
|
|
|
|
debug("%s: base=%x, max-frequency=%d, deactivate_delay=%d\n",
|
|
__func__, (uint)plat->base, plat->frequency,
|
|
plat->deactivate_delay_us);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_calc_modclk(ulong max_freq)
|
|
{
|
|
/*
|
|
* While this is not strictly correct for the RK3368, as the
|
|
* GPLL will be 576MHz, things will still work, as the
|
|
* clk_set_rate(...) implementation in our clock-driver will
|
|
* chose the next closest rate not exceeding what we request
|
|
* based on the output of this function.
|
|
*/
|
|
|
|
unsigned div;
|
|
const unsigned long gpll_hz = 594000000UL;
|
|
|
|
/*
|
|
* We need to find an input clock that provides at least twice
|
|
* the maximum frequency and can be generated from the assumed
|
|
* speed of GPLL (594MHz) using an integer divider.
|
|
*
|
|
* To give us more achievable bitrates at higher speeds (these
|
|
* are generated by dividing by an even 16-bit integer from
|
|
* this frequency), we try to have an input frequency of at
|
|
* least 4x our max_freq.
|
|
*/
|
|
|
|
div = DIV_ROUND_UP(gpll_hz, max_freq * 4);
|
|
return gpll_hz / div;
|
|
}
|
|
|
|
static int rockchip_spi_probe(struct udevice *bus)
|
|
{
|
|
struct rockchip_spi_platdata *plat = dev_get_platdata(bus);
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
debug("%s: probe\n", __func__);
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
ret = conv_of_platdata(bus);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
priv->regs = (struct rockchip_spi *)plat->base;
|
|
|
|
priv->last_transaction_us = timer_get_us();
|
|
priv->max_freq = plat->frequency;
|
|
|
|
/* Clamp the value from the DTS against any hardware limits */
|
|
if (priv->max_freq > ROCKCHIP_SPI_MAX_RATE)
|
|
priv->max_freq = ROCKCHIP_SPI_MAX_RATE;
|
|
|
|
/* Find a module-input clock that fits with the max_freq setting */
|
|
ret = clk_set_rate(&priv->clk,
|
|
rockchip_spi_calc_modclk(priv->max_freq));
|
|
if (ret < 0) {
|
|
debug("%s: Failed to set clock: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
priv->input_rate = ret;
|
|
debug("%s: rate = %u\n", __func__, priv->input_rate);
|
|
priv->bits_per_word = 8;
|
|
priv->tmode = TMOD_TR; /* Tx & Rx */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
struct rockchip_spi *regs = priv->regs;
|
|
u8 spi_dfs, spi_tf;
|
|
uint ctrlr0;
|
|
|
|
/* Disable the SPI hardware */
|
|
rkspi_enable_chip(regs, 0);
|
|
|
|
switch (priv->bits_per_word) {
|
|
case 8:
|
|
priv->n_bytes = 1;
|
|
spi_dfs = DFS_8BIT;
|
|
spi_tf = HALF_WORD_OFF;
|
|
break;
|
|
case 16:
|
|
priv->n_bytes = 2;
|
|
spi_dfs = DFS_16BIT;
|
|
spi_tf = HALF_WORD_ON;
|
|
break;
|
|
default:
|
|
debug("%s: unsupported bits: %dbits\n", __func__,
|
|
priv->bits_per_word);
|
|
return -EPROTONOSUPPORT;
|
|
}
|
|
|
|
if (priv->speed_hz != priv->last_speed_hz)
|
|
rkspi_set_clk(priv, priv->speed_hz);
|
|
|
|
/* Operation Mode */
|
|
ctrlr0 = OMOD_MASTER << OMOD_SHIFT;
|
|
|
|
/* Data Frame Size */
|
|
ctrlr0 |= spi_dfs << DFS_SHIFT;
|
|
|
|
/* set SPI mode 0..3 */
|
|
if (priv->mode & SPI_CPOL)
|
|
ctrlr0 |= SCOL_HIGH << SCOL_SHIFT;
|
|
if (priv->mode & SPI_CPHA)
|
|
ctrlr0 |= SCPH_TOGSTA << SCPH_SHIFT;
|
|
|
|
/* Chip Select Mode */
|
|
ctrlr0 |= CSM_KEEP << CSM_SHIFT;
|
|
|
|
/* SSN to Sclk_out delay */
|
|
ctrlr0 |= SSN_DELAY_ONE << SSN_DELAY_SHIFT;
|
|
|
|
/* Serial Endian Mode */
|
|
ctrlr0 |= SEM_LITTLE << SEM_SHIFT;
|
|
|
|
/* First Bit Mode */
|
|
ctrlr0 |= FBM_MSB << FBM_SHIFT;
|
|
|
|
/* Byte and Halfword Transform */
|
|
ctrlr0 |= spi_tf << HALF_WORD_TX_SHIFT;
|
|
|
|
/* Rxd Sample Delay */
|
|
ctrlr0 |= 0 << RXDSD_SHIFT;
|
|
|
|
/* Frame Format */
|
|
ctrlr0 |= FRF_SPI << FRF_SHIFT;
|
|
|
|
/* Tx and Rx mode */
|
|
ctrlr0 |= (priv->tmode & TMOD_MASK) << TMOD_SHIFT;
|
|
|
|
writel(ctrlr0, ®s->ctrlr0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_release_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
rkspi_enable_chip(priv->regs, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
struct rockchip_spi *regs = priv->regs;
|
|
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
|
|
int len = bitlen >> 3;
|
|
const u8 *out = dout;
|
|
u8 *in = din;
|
|
int toread, towrite;
|
|
int ret;
|
|
|
|
debug("%s: dout=%p, din=%p, len=%x, flags=%lx\n", __func__, dout, din,
|
|
len, flags);
|
|
if (DEBUG_RK_SPI)
|
|
rkspi_dump_regs(regs);
|
|
|
|
/* Assert CS before transfer */
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(dev, slave_plat->cs);
|
|
|
|
while (len > 0) {
|
|
int todo = min(len, 0xffff);
|
|
|
|
rkspi_enable_chip(regs, false);
|
|
writel(todo - 1, ®s->ctrlr1);
|
|
rkspi_enable_chip(regs, true);
|
|
|
|
toread = todo;
|
|
towrite = todo;
|
|
while (toread || towrite) {
|
|
u32 status = readl(®s->sr);
|
|
|
|
if (towrite && !(status & SR_TF_FULL)) {
|
|
writel(out ? *out++ : 0, regs->txdr);
|
|
towrite--;
|
|
}
|
|
if (toread && !(status & SR_RF_EMPT)) {
|
|
u32 byte = readl(regs->rxdr);
|
|
|
|
if (in)
|
|
*in++ = byte;
|
|
toread--;
|
|
}
|
|
}
|
|
ret = rkspi_wait_till_not_busy(regs);
|
|
if (ret)
|
|
break;
|
|
len -= todo;
|
|
}
|
|
|
|
/* Deassert CS after transfer */
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(dev, slave_plat->cs);
|
|
|
|
rkspi_enable_chip(regs, false);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rockchip_spi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
/* Clamp to the maximum frequency specified in the DTS */
|
|
if (speed > priv->max_freq)
|
|
speed = priv->max_freq;
|
|
|
|
priv->speed_hz = speed;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct rockchip_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops rockchip_spi_ops = {
|
|
.claim_bus = rockchip_spi_claim_bus,
|
|
.release_bus = rockchip_spi_release_bus,
|
|
.xfer = rockchip_spi_xfer,
|
|
.set_speed = rockchip_spi_set_speed,
|
|
.set_mode = rockchip_spi_set_mode,
|
|
/*
|
|
* cs_info is not needed, since we require all chip selects to be
|
|
* in the device tree explicitly
|
|
*/
|
|
};
|
|
|
|
static const struct udevice_id rockchip_spi_ids[] = {
|
|
{ .compatible = "rockchip,rk3288-spi" },
|
|
{ .compatible = "rockchip,rk3368-spi" },
|
|
{ .compatible = "rockchip,rk3399-spi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_spi) = {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.name = "rockchip_rk3288_spi",
|
|
#else
|
|
.name = "rockchip_spi",
|
|
#endif
|
|
.id = UCLASS_SPI,
|
|
.of_match = rockchip_spi_ids,
|
|
.ops = &rockchip_spi_ops,
|
|
.ofdata_to_platdata = rockchip_spi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct rockchip_spi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct rockchip_spi_priv),
|
|
.probe = rockchip_spi_probe,
|
|
};
|