mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
0b1284eb52
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
426 lines
10 KiB
C
426 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Board functions for Siemens TAURUS (AT91SAM9G20) based boards
|
|
* (C) Copyright Siemens AG
|
|
*
|
|
* Based on:
|
|
* U-Boot file: board/atmel/at91sam9260ek/at91sam9260ek.c
|
|
*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*/
|
|
|
|
#include <command.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <flash.h>
|
|
#include <init.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/at91sam9260_matrix.h>
|
|
#include <asm/arch/at91sam9_smc.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91sam9_sdramc.h>
|
|
#include <asm/arch/atmel_serial.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
#include <atmel_mci.h>
|
|
#include <asm/arch/at91_spi.h>
|
|
#include <spi.h>
|
|
|
|
#include <net.h>
|
|
#ifndef CONFIG_DM_ETH
|
|
#include <netdev.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void taurus_request_gpio(void)
|
|
{
|
|
gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena");
|
|
gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy");
|
|
gpio_request(AT91_PIN_PA25, "ena PHY");
|
|
}
|
|
|
|
static void taurus_nand_hw_init(void)
|
|
{
|
|
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
|
|
struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
|
|
unsigned long csa;
|
|
|
|
/* Assign CS3 to NAND/SmartMedia Interface */
|
|
csa = readl(&matrix->ebicsa);
|
|
csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
|
|
writel(csa, &matrix->ebicsa);
|
|
|
|
/* Configure SMC CS3 for NAND/SmartMedia */
|
|
writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
|
|
AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
|
|
&smc->cs[3].setup);
|
|
writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
|
|
AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(3),
|
|
&smc->cs[3].pulse);
|
|
writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
|
|
&smc->cs[3].cycle);
|
|
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
|
AT91_SMC_MODE_EXNW_DISABLE |
|
|
AT91_SMC_MODE_DBW_8 |
|
|
AT91_SMC_MODE_TDF_CYCLE(3),
|
|
&smc->cs[3].mode);
|
|
|
|
/* Configure RDY/BSY */
|
|
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
|
|
|
|
/* Enable NandFlash */
|
|
at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
|
|
}
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#include <spl.h>
|
|
#include <nand.h>
|
|
#include <spi_flash.h>
|
|
|
|
void matrix_init(void)
|
|
{
|
|
struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX;
|
|
|
|
writel((readl(&mat->scfg[3]) & (~AT91_MATRIX_SLOT_CYCLE))
|
|
| AT91_MATRIX_SLOT_CYCLE_(0x40),
|
|
&mat->scfg[3]);
|
|
}
|
|
|
|
#if defined(CONFIG_BOARD_AXM)
|
|
static int at91_is_recovery(void)
|
|
{
|
|
if ((at91_get_gpio_value(AT91_PIN_PA26) == 0) &&
|
|
(at91_get_gpio_value(AT91_PIN_PA27) == 0))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#elif defined(CONFIG_BOARD_TAURUS)
|
|
static int at91_is_recovery(void)
|
|
{
|
|
if (at91_get_gpio_value(AT91_PIN_PA31) == 0)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void spl_board_init(void)
|
|
{
|
|
taurus_nand_hw_init();
|
|
at91_spi0_hw_init(TAURUS_SPI_MASK);
|
|
|
|
#if defined(CONFIG_BOARD_AXM)
|
|
/* Configure LED PINs */
|
|
at91_set_gpio_output(AT91_PIN_PA6, 0);
|
|
at91_set_gpio_output(AT91_PIN_PA8, 0);
|
|
at91_set_gpio_output(AT91_PIN_PA9, 0);
|
|
at91_set_gpio_output(AT91_PIN_PA10, 0);
|
|
at91_set_gpio_output(AT91_PIN_PA11, 0);
|
|
at91_set_gpio_output(AT91_PIN_PA12, 0);
|
|
|
|
/* Configure recovery button PINs */
|
|
at91_set_gpio_input(AT91_PIN_PA26, 1);
|
|
at91_set_gpio_input(AT91_PIN_PA27, 1);
|
|
#elif defined(CONFIG_BOARD_TAURUS)
|
|
at91_set_gpio_input(AT91_PIN_PA31, 1);
|
|
#endif
|
|
|
|
/* check for recovery mode */
|
|
if (at91_is_recovery() == 1) {
|
|
struct spi_flash *flash;
|
|
|
|
puts("Recovery button pressed\n");
|
|
nand_init();
|
|
spl_nand_erase_one(0, 0);
|
|
flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
|
|
0,
|
|
CONFIG_SF_DEFAULT_SPEED,
|
|
CONFIG_SF_DEFAULT_MODE);
|
|
if (!flash) {
|
|
puts("no flash\n");
|
|
} else {
|
|
puts("erase spi flash sector 0\n");
|
|
spi_flash_erase(flash, 0,
|
|
CONFIG_SYS_NAND_U_BOOT_SIZE);
|
|
}
|
|
}
|
|
}
|
|
|
|
#define SDRAM_BASE_CONF (AT91_SDRAMC_NR_13 | AT91_SDRAMC_CAS_3 \
|
|
|AT91_SDRAMC_NB_4 | AT91_SDRAMC_DBW_32 \
|
|
| AT91_SDRAMC_TWR_VAL(3) | AT91_SDRAMC_TRC_VAL(9) \
|
|
| AT91_SDRAMC_TRP_VAL(3) | AT91_SDRAMC_TRCD_VAL(3) \
|
|
| AT91_SDRAMC_TRAS_VAL(6) | AT91_SDRAMC_TXSR_VAL(10))
|
|
|
|
void sdramc_configure(unsigned int mask)
|
|
{
|
|
struct at91_matrix *ma = (struct at91_matrix *)ATMEL_BASE_MATRIX;
|
|
struct sdramc_reg setting;
|
|
|
|
at91_sdram_hw_init();
|
|
setting.cr = SDRAM_BASE_CONF | mask;
|
|
setting.mdr = AT91_SDRAMC_MD_SDRAM;
|
|
setting.tr = (CONFIG_SYS_MASTER_CLOCK * 7) / 1000000;
|
|
|
|
writel(readl(&ma->ebicsa) | AT91_MATRIX_CS1A_SDRAMC |
|
|
AT91_MATRIX_VDDIOMSEL_3_3V | AT91_MATRIX_EBI_IOSR_SEL,
|
|
&ma->ebicsa);
|
|
|
|
sdramc_initialize(ATMEL_BASE_CS1, &setting);
|
|
}
|
|
|
|
void mem_init(void)
|
|
{
|
|
unsigned int ram_size = 0;
|
|
|
|
/* Configure SDRAM for 128MB */
|
|
sdramc_configure(AT91_SDRAMC_NC_10);
|
|
|
|
/* Do memtest for 128MB */
|
|
ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
|
|
/*
|
|
* If 32MB or 16MB should be supported check also for
|
|
* expected mirroring at A16 and A17
|
|
* To find mirror addresses depends how the collumns are connected
|
|
* at RAM (internaly or externaly)
|
|
* If the collumns are not in inverted order the mirror size effect
|
|
* behaves like normal SRAM with A0,A1,A2,etc. connected incremantal
|
|
*/
|
|
|
|
/* Mirrors at A15 on ATMEL G20 SDRAM Controller with 64MB*/
|
|
if (ram_size == 0x800) {
|
|
printf("\n\r 64MB\n");
|
|
sdramc_configure(AT91_SDRAMC_NC_9);
|
|
} else {
|
|
/* Size already initialized */
|
|
printf("\n\r 128MB\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
static void siemens_phy_reset(void)
|
|
{
|
|
/*
|
|
* we need to reset PHY for 200us
|
|
* because of bug in ATMEL G20 CPU (undefined initial state of GPIO)
|
|
*/
|
|
if ((readl(AT91_ASM_RSTC_SR) & AT91_RSTC_RSTTYP) ==
|
|
AT91_RSTC_RSTTYP_GENERAL)
|
|
at91_set_gpio_value(AT91_PIN_PA25, 0); /* reset eth switch */
|
|
}
|
|
|
|
static void taurus_macb_hw_init(void)
|
|
{
|
|
/* Enable EMAC clock */
|
|
at91_periph_clk_enable(ATMEL_ID_EMAC0);
|
|
|
|
/*
|
|
* Disable pull-up on:
|
|
* RXDV (PA17) => PHY normal mode (not Test mode)
|
|
* ERX0 (PA14) => PHY ADDR0
|
|
* ERX1 (PA15) => PHY ADDR1
|
|
* ERX2 (PA25) => PHY ADDR2
|
|
* ERX3 (PA26) => PHY ADDR3
|
|
* ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
|
|
*
|
|
* PHY has internal pull-down
|
|
*/
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 14, 0);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 17, 0);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 25, 0);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 26, 0);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 28, 0);
|
|
|
|
siemens_phy_reset();
|
|
|
|
at91_phy_reset();
|
|
|
|
at91_set_gpio_input(AT91_PIN_PA25, 1); /* ERST tri-state */
|
|
|
|
/* Re-enable pull-up */
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 14, 1);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 25, 1);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 26, 1);
|
|
at91_set_pio_pullup(AT91_PIO_PORTA, 28, 1);
|
|
|
|
/* Initialize EMAC=MACB hardware */
|
|
at91_macb_hw_init();
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_GENERIC_ATMEL_MCI
|
|
int board_mmc_init(struct bd_info *bd)
|
|
{
|
|
at91_mci_hw_init();
|
|
|
|
return atmel_mci_init((void *)ATMEL_BASE_MCI);
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/* Enable clocks for all PIOs */
|
|
at91_periph_clk_enable(ATMEL_ID_PIOA);
|
|
at91_periph_clk_enable(ATMEL_ID_PIOB);
|
|
at91_periph_clk_enable(ATMEL_ID_PIOC);
|
|
|
|
at91_seriald_hw_init();
|
|
taurus_request_gpio();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_GADGET_AT91
|
|
#include <linux/usb/at91_udc.h>
|
|
|
|
void at91_udp_hw_init(void)
|
|
{
|
|
/* Enable PLLB */
|
|
at91_pllb_clk_enable(get_pllb_init());
|
|
|
|
/* Enable UDPCK clock, MCK is enabled in at91_clock_init() */
|
|
at91_periph_clk_enable(ATMEL_ID_UDP);
|
|
|
|
at91_system_clk_enable(AT91SAM926x_PMC_UDP);
|
|
}
|
|
|
|
struct at91_udc_data board_udc_data = {
|
|
.baseaddr = ATMEL_BASE_UDP0,
|
|
};
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
taurus_request_gpio();
|
|
#ifdef CONFIG_CMD_NAND
|
|
taurus_nand_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_MACB
|
|
taurus_macb_hw_init();
|
|
#endif
|
|
at91_spi0_hw_init(TAURUS_SPI_MASK);
|
|
#ifdef CONFIG_USB_GADGET_AT91
|
|
at91_udp_hw_init();
|
|
at91_udc_probe(&board_udc_data);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
#if defined(CONFIG_BOARD_AXM)
|
|
/*
|
|
* Booting the Fallback Image.
|
|
*
|
|
* The function is used to provide and
|
|
* boot the image with the fallback
|
|
* parameters, incase if the faulty image
|
|
* in upgraded over the base firmware.
|
|
*
|
|
*/
|
|
static int upgrade_failure_fallback(void)
|
|
{
|
|
char *partitionset_active = NULL;
|
|
char *rootfs = NULL;
|
|
char *rootfs_fallback = NULL;
|
|
char *kern_off;
|
|
char *kern_off_fb;
|
|
char *kern_size;
|
|
char *kern_size_fb;
|
|
|
|
partitionset_active = env_get("partitionset_active");
|
|
if (partitionset_active) {
|
|
if (partitionset_active[0] == 'A')
|
|
env_set("partitionset_active", "B");
|
|
else
|
|
env_set("partitionset_active", "A");
|
|
} else {
|
|
printf("partitionset_active missing.\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
rootfs = env_get("rootfs");
|
|
rootfs_fallback = env_get("rootfs_fallback");
|
|
env_set("rootfs", rootfs_fallback);
|
|
env_set("rootfs_fallback", rootfs);
|
|
|
|
kern_size = env_get("kernel_size");
|
|
kern_size_fb = env_get("kernel_size_fallback");
|
|
env_set("kernel_size", kern_size_fb);
|
|
env_set("kernel_size_fallback", kern_size);
|
|
|
|
kern_off = env_get("kernel_Off");
|
|
kern_off_fb = env_get("kernel_Off_fallback");
|
|
env_set("kernel_Off", kern_off_fb);
|
|
env_set("kernel_Off_fallback", kern_off);
|
|
|
|
env_set("bootargs", '\0');
|
|
env_set("upgrade_available", '\0');
|
|
env_set("boot_retries", '\0');
|
|
env_save();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int do_upgrade_available(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
char *const argv[])
|
|
{
|
|
unsigned long upgrade_available = 0;
|
|
unsigned long boot_retry = 0;
|
|
char boot_buf[10];
|
|
|
|
upgrade_available = dectoul(env_get("upgrade_available"), NULL);
|
|
if (upgrade_available) {
|
|
boot_retry = dectoul(env_get("boot_retries"), NULL);
|
|
boot_retry++;
|
|
sprintf(boot_buf, "%lx", boot_retry);
|
|
env_set("boot_retries", boot_buf);
|
|
env_save();
|
|
|
|
/*
|
|
* Here the boot_retries count is checked, and if the
|
|
* count becomes greater than 2 switch back to the
|
|
* fallback, and reset the board.
|
|
*/
|
|
|
|
if (boot_retry > 2) {
|
|
if (upgrade_failure_fallback() == 0)
|
|
do_reset(NULL, 0, 0, NULL);
|
|
return -1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
upgrade_available, 1, 1, do_upgrade_available,
|
|
"check Siemens update",
|
|
"no parameters"
|
|
);
|
|
#endif
|
|
#endif
|