u-boot/include/configs/colibri_imx6.h
Tom Rini 5523afbe4a Convert CONFIG_BOARD_EARLY_INIT_F et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_EARLY_INIT_F
   CONFIG_BOARD_LATE_INIT
   CONFIG_DISPLAY_BOARDINFO
   CONFIG_DISPLAY_BOARDINFO_LATE

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05 11:26:29 -04:00

145 lines
4.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2013-2019 Toradex, Inc.
*
* Configuration settings for the Toradex Colibri iMX6
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <linux/stringify.h>
#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>
#ifdef CONFIG_SPL
#include "imx6_spl.h"
#endif
#define CONFIG_MXC_UART_BASE UART1_BASE
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
/* USB Configs */
/* Host */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
/* Client */
#define CONFIG_USBD_HS
/* Framebuffer and LCD */
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
/* Command definition */
#undef CONFIG_IPADDR
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
#undef CONFIG_SERVERIP
#define CONFIG_SERVERIP 192.168.10.1
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#undef BOOTENV_RUN_NET_USB_START
#define BOOTENV_RUN_NET_USB_START ""
#else /* CONFIG_SPL_BUILD */
#define BOOTENV
#endif /* CONFIG_SPL_BUILD */
#define UBOOT_UPDATE \
"uboot_hwpart=1\0" \
"uboot_blk=8a\0" \
"uboot_spl_blk=2\0" \
"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
"setexpr blkcnt ${blkcnt} / 0x200\0" \
"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x12100000\0" \
"kernel_addr_r=0x11000000\0" \
"pxefile_addr_r=0x17100000\0" \
"ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
"nfsboot=run setup; " \
"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
"run nfsdtbload; dhcp ${kernel_addr_r} " \
"&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
"bootcmd=run distro_bootcmd; " \
"usb start ; " \
"setenv stdout serial,vidconsole; " \
"setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
"fdt_file=" FDT_FILE "\0" \
"fdtfile=" FDT_FILE "\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"flash_eth.img && source ${loadaddr}\0" \
"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"setup=setenv setupargs fec_mac=${ethaddr} " \
"consoleblank=0 no_console_suspend=1 console=tty1 " \
"console=${console},${baudrate}n8\0 " \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"splashpos=m,m\0" \
"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"vidargs=fbmem=8M\0"
/* Miscellaneous configurable options */
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE 1024
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS 48
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#endif /* __CONFIG_H */