mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
25ab4b0303
Rather than assuming that the chip offset length is 1, allow it to be provided. This allows chips that don't use the default offset length to be used (at present they are only supported by the command line 'i2c' command which sets the offset length explicitly). Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
80 lines
1.9 KiB
C
80 lines
1.9 KiB
C
/*
|
|
* (C) Copyright 2010-2012
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/funcmux.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
|
|
#ifdef CONFIG_TEGRA_MMC
|
|
/*
|
|
* Routine: pin_mux_mmc
|
|
* Description: setup the pin muxes/tristate values for the SDMMC(s)
|
|
*/
|
|
void pin_mux_mmc(void)
|
|
{
|
|
struct udevice *dev;
|
|
uchar val;
|
|
int ret;
|
|
|
|
/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
|
|
ret = i2c_get_chip_for_busnum(0, 0x3c, 1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
|
|
return;
|
|
}
|
|
val = 0x29;
|
|
ret = dm_i2c_write(dev, 0x46, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
|
|
val = 0x00;
|
|
ret = dm_i2c_write(dev, 0x45, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
|
|
val = 0x1f;
|
|
ret = dm_i2c_write(dev, 0x44, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
|
|
|
|
funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
|
|
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
|
|
}
|
|
#endif
|
|
|
|
/* this is a weak define that we are overriding */
|
|
void pin_mux_usb(void)
|
|
{
|
|
struct udevice *dev;
|
|
uchar val;
|
|
int ret;
|
|
|
|
/*
|
|
* This is a hack. This should be represented in DT using the
|
|
* vbus-gpio property. However, U-Boot's DT support doesn't
|
|
* support any GPIO controller other than the Tegra's yet.
|
|
*/
|
|
|
|
/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
|
|
ret = i2c_get_chip_for_busnum(0, 0x20, 1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
|
|
return;
|
|
}
|
|
val = 0x03;
|
|
ret = dm_i2c_write(dev, 2, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x20 2 failed: %d\n", ret);
|
|
val = 0xfc;
|
|
ret = dm_i2c_write(dev, 6, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x20 6 failed: %d\n", ret);
|
|
}
|