mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
de9bf1b591
The dram_init and dram_init_banksize functions were using a board
specific implementation for decoding the memory banks from the fdt. This
board specific implementation uses a static variable 'tmp' which makes
these functions unsafe for execution from within the board_init_f
context.
This unsafe use of a static variable was causing a specific bug when
using the zynq_zybo configuration, U-Boot would generate the following
error during image load. This was caused due to dram_init overwriting
the relocations for the 'image' variable within the do_bootm function.
Out of coincidence the un-initialized memory has a compression type
which is the same as the value for the relocation type R_ARM_RELATIVE.
Uncompressing Invalid Image ... Unimplemented compression type 23
It should be noted that this is just one way the issue could surface,
other cases my not be observed in normal boot flow. Depending on the
size of various sections, and location of relocations within __rel_dyn
and the compiler/linker the outcome of this bug can differ greatly.
This change makes the dram_init* functions use a generic implementation
of decoding and populating memory bank and size data.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Fixes: 758f29d0f8 ("ARM: zynq: Support systems with more memory banks")
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
150 lines
3 KiB
C
150 lines
3 KiB
C
/*
|
|
* (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdtdec.h>
|
|
#include <fpga.h>
|
|
#include <mmc.h>
|
|
#include <zynqpl.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
|
|
(defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
|
|
static xilinx_desc fpga;
|
|
|
|
/* It can be done differently */
|
|
static xilinx_desc fpga007s = XILINX_XC7Z007S_DESC(0x7);
|
|
static xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
|
|
static xilinx_desc fpga012s = XILINX_XC7Z012S_DESC(0x12);
|
|
static xilinx_desc fpga014s = XILINX_XC7Z014S_DESC(0x14);
|
|
static xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15);
|
|
static xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
|
|
static xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
|
|
static xilinx_desc fpga035 = XILINX_XC7Z035_DESC(0x35);
|
|
static xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
|
|
static xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
|
|
(defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
|
|
u32 idcode;
|
|
|
|
idcode = zynq_slcr_get_idcode();
|
|
|
|
switch (idcode) {
|
|
case XILINX_ZYNQ_7007S:
|
|
fpga = fpga007s;
|
|
break;
|
|
case XILINX_ZYNQ_7010:
|
|
fpga = fpga010;
|
|
break;
|
|
case XILINX_ZYNQ_7012S:
|
|
fpga = fpga012s;
|
|
break;
|
|
case XILINX_ZYNQ_7014S:
|
|
fpga = fpga014s;
|
|
break;
|
|
case XILINX_ZYNQ_7015:
|
|
fpga = fpga015;
|
|
break;
|
|
case XILINX_ZYNQ_7020:
|
|
fpga = fpga020;
|
|
break;
|
|
case XILINX_ZYNQ_7030:
|
|
fpga = fpga030;
|
|
break;
|
|
case XILINX_ZYNQ_7035:
|
|
fpga = fpga035;
|
|
break;
|
|
case XILINX_ZYNQ_7045:
|
|
fpga = fpga045;
|
|
break;
|
|
case XILINX_ZYNQ_7100:
|
|
fpga = fpga100;
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
|
|
(defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
|
|
fpga_init();
|
|
fpga_add(fpga_xilinx, &fpga);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
|
|
case ZYNQ_BM_NOR:
|
|
setenv("modeboot", "norboot");
|
|
break;
|
|
case ZYNQ_BM_SD:
|
|
setenv("modeboot", "sdboot");
|
|
break;
|
|
case ZYNQ_BM_JTAG:
|
|
setenv("modeboot", "jtagboot");
|
|
break;
|
|
default:
|
|
setenv("modeboot", "");
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DISPLAY_BOARDINFO
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Xilinx Zynq\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
|
|
{
|
|
#if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
|
|
defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET)
|
|
if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
|
|
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
|
|
ethaddr, 6))
|
|
printf("I2C EEPROM MAC address read failed\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
|
|
void dram_init_banksize(void)
|
|
{
|
|
fdtdec_setup_memory_banksize();
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
if (fdtdec_setup_memory_size() != 0)
|
|
return -EINVAL;
|
|
|
|
zynq_ddrc_init();
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
|
|
|
|
zynq_ddrc_init();
|
|
|
|
return 0;
|
|
}
|
|
#endif
|