mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
56c91bc3b6
s3c64xx.c implemented its own nand_read_byte, nand_write_buf and nand_read_buf functions. This provoked a regression when these functions were made public by patch 55f429bb39614a16b1bacc9a8bea9ac01a60bfc8. This deletes these duplicated functions from s3c64xx.c and adds the generic implementations in nand_base.c to the spl Makefile. It also adds -ffcuntion-sections and -gc-sections to the compilation flags of the SPL to avoid errors originating from unused functions in nand_base.c. Description of the regression: http://article.gmane.org/gmane.comp.boot-loaders.u-boot/108873 Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com> Cc: scottwood@freescale.com Cc: s-paulraj@ti.com Cc: albert.u.boot@aribaud.net
295 lines
7.5 KiB
C
295 lines
7.5 KiB
C
/*
|
|
* (C) Copyright 2006 DENX Software Engineering
|
|
*
|
|
* Implementation for U-Boot 1.1.6 by Samsung
|
|
*
|
|
* (C) Copyright 2008
|
|
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <nand.h>
|
|
#include <linux/mtd/nand.h>
|
|
|
|
#include <asm/arch/s3c6400.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
|
|
#define MAX_CHIPS 2
|
|
static int nand_cs[MAX_CHIPS] = {0, 1};
|
|
|
|
#ifdef CONFIG_NAND_SPL
|
|
#define printf(arg...) do {} while (0)
|
|
#endif
|
|
|
|
/* Nand flash definition values by jsgood */
|
|
#ifdef S3C_NAND_DEBUG
|
|
/*
|
|
* Function to print out oob buffer for debugging
|
|
* Written by jsgood
|
|
*/
|
|
static void print_oob(const char *header, struct mtd_info *mtd)
|
|
{
|
|
int i;
|
|
struct nand_chip *chip = mtd->priv;
|
|
|
|
printf("%s:\t", header);
|
|
|
|
for (i = 0; i < 64; i++)
|
|
printf("%02x ", chip->oob_poi[i]);
|
|
|
|
printf("\n");
|
|
}
|
|
#endif /* S3C_NAND_DEBUG */
|
|
|
|
static void s3c_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
int ctrl = readl(NFCONT);
|
|
|
|
switch (chip) {
|
|
case -1:
|
|
ctrl |= 6;
|
|
break;
|
|
case 0:
|
|
ctrl &= ~2;
|
|
break;
|
|
case 1:
|
|
ctrl &= ~4;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
writel(ctrl, NFCONT);
|
|
}
|
|
|
|
/*
|
|
* Hardware specific access to control-lines function
|
|
* Written by jsgood
|
|
*/
|
|
static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
if (ctrl & NAND_CLE)
|
|
this->IO_ADDR_W = (void __iomem *)NFCMMD;
|
|
else if (ctrl & NAND_ALE)
|
|
this->IO_ADDR_W = (void __iomem *)NFADDR;
|
|
else
|
|
this->IO_ADDR_W = (void __iomem *)NFDATA;
|
|
if (ctrl & NAND_NCE)
|
|
s3c_nand_select_chip(mtd, *(int *)this->priv);
|
|
else
|
|
s3c_nand_select_chip(mtd, -1);
|
|
}
|
|
|
|
if (cmd != NAND_CMD_NONE)
|
|
writeb(cmd, this->IO_ADDR_W);
|
|
}
|
|
|
|
/*
|
|
* Function for checking device ready pin
|
|
* Written by jsgood
|
|
*/
|
|
static int s3c_nand_device_ready(struct mtd_info *mtdinfo)
|
|
{
|
|
return !!(readl(NFSTAT) & NFSTAT_RnB);
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_S3C_NAND_HWECC
|
|
/*
|
|
* This function is called before encoding ecc codes to ready ecc engine.
|
|
* Written by jsgood
|
|
*/
|
|
static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode)
|
|
{
|
|
u_long nfcont, nfconf;
|
|
|
|
/*
|
|
* The original driver used 4-bit ECC for "new" MLC chips, i.e., for
|
|
* those with non-zero ID[3][3:2], which anyway only holds for ST
|
|
* (Numonyx) chips
|
|
*/
|
|
nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT;
|
|
|
|
writel(nfconf, NFCONF);
|
|
|
|
/* Initialize & unlock */
|
|
nfcont = readl(NFCONT);
|
|
nfcont |= NFCONT_INITECC;
|
|
nfcont &= ~NFCONT_MECCLOCK;
|
|
|
|
if (mode == NAND_ECC_WRITE)
|
|
nfcont |= NFCONT_ECC_ENC;
|
|
else if (mode == NAND_ECC_READ)
|
|
nfcont &= ~NFCONT_ECC_ENC;
|
|
|
|
writel(nfcont, NFCONT);
|
|
}
|
|
|
|
/*
|
|
* This function is called immediately after encoding ecc codes.
|
|
* This function returns encoded ecc codes.
|
|
* Written by jsgood
|
|
*/
|
|
static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
|
|
u_char *ecc_code)
|
|
{
|
|
u_long nfcont, nfmecc0;
|
|
|
|
/* Lock */
|
|
nfcont = readl(NFCONT);
|
|
nfcont |= NFCONT_MECCLOCK;
|
|
writel(nfcont, NFCONT);
|
|
|
|
nfmecc0 = readl(NFMECC0);
|
|
|
|
ecc_code[0] = nfmecc0 & 0xff;
|
|
ecc_code[1] = (nfmecc0 >> 8) & 0xff;
|
|
ecc_code[2] = (nfmecc0 >> 16) & 0xff;
|
|
ecc_code[3] = (nfmecc0 >> 24) & 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function determines whether read data is good or not.
|
|
* If SLC, must write ecc codes to controller before reading status bit.
|
|
* If MLC, status bit is already set, so only reading is needed.
|
|
* If status bit is good, return 0.
|
|
* If correctable errors occured, do that.
|
|
* If uncorrectable errors occured, return -1.
|
|
* Written by jsgood
|
|
*/
|
|
static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat,
|
|
u_char *read_ecc, u_char *calc_ecc)
|
|
{
|
|
int ret = -1;
|
|
u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr;
|
|
u_char err_type, repaired;
|
|
|
|
/* SLC: Write ecc to compare */
|
|
nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0];
|
|
nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2];
|
|
writel(nfmeccdata0, NFMECCDATA0);
|
|
writel(nfmeccdata1, NFMECCDATA1);
|
|
|
|
/* Read ecc status */
|
|
nfestat0 = readl(NFESTAT0);
|
|
err_type = nfestat0 & 0x3;
|
|
|
|
switch (err_type) {
|
|
case 0: /* No error */
|
|
ret = 0;
|
|
break;
|
|
|
|
case 1:
|
|
/*
|
|
* 1 bit error (Correctable)
|
|
* (nfestat0 >> 7) & 0x7ff :error byte number
|
|
* (nfestat0 >> 4) & 0x7 :error bit number
|
|
*/
|
|
err_byte_addr = (nfestat0 >> 7) & 0x7ff;
|
|
repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7));
|
|
|
|
printf("S3C NAND: 1 bit error detected at byte %ld. "
|
|
"Correcting from 0x%02x to 0x%02x...OK\n",
|
|
err_byte_addr, dat[err_byte_addr], repaired);
|
|
|
|
dat[err_byte_addr] = repaired;
|
|
|
|
ret = 1;
|
|
break;
|
|
|
|
case 2: /* Multiple error */
|
|
case 3: /* ECC area error */
|
|
printf("S3C NAND: ECC uncorrectable error detected. "
|
|
"Not correctable.\n");
|
|
ret = -1;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_SYS_S3C_NAND_HWECC */
|
|
|
|
/*
|
|
* Board-specific NAND initialization. The following members of the
|
|
* argument are board-specific (per include/linux/mtd/nand.h):
|
|
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
|
|
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
|
|
* - hwcontrol: hardwarespecific function for accesing control-lines
|
|
* - dev_ready: hardwarespecific function for accesing device ready/busy line
|
|
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
|
|
* only be provided if a hardware ECC is available
|
|
* - eccmode: mode of ecc, see defines
|
|
* - chip_delay: chip dependent delay for transfering data from array to
|
|
* read regs (tR)
|
|
* - options: various chip options. They can partly be set to inform
|
|
* nand_scan about special functionality. See the defines for further
|
|
* explanation
|
|
* Members with a "?" were not set in the merged testing-NAND branch,
|
|
* so they are not set here either.
|
|
*/
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
static int chip_n;
|
|
|
|
if (chip_n >= MAX_CHIPS)
|
|
return -ENODEV;
|
|
|
|
NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6;
|
|
|
|
nand->IO_ADDR_R = (void __iomem *)NFDATA;
|
|
nand->IO_ADDR_W = (void __iomem *)NFDATA;
|
|
nand->cmd_ctrl = s3c_nand_hwcontrol;
|
|
nand->dev_ready = s3c_nand_device_ready;
|
|
nand->select_chip = s3c_nand_select_chip;
|
|
nand->options = 0;
|
|
#ifdef CONFIG_NAND_SPL
|
|
nand->read_byte = nand_read_byte;
|
|
nand->write_buf = nand_write_buf;
|
|
nand->read_buf = nand_read_buf;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_S3C_NAND_HWECC
|
|
nand->ecc.hwctl = s3c_nand_enable_hwecc;
|
|
nand->ecc.calculate = s3c_nand_calculate_ecc;
|
|
nand->ecc.correct = s3c_nand_correct_data;
|
|
|
|
/*
|
|
* If you get more than 1 NAND-chip with different page-sizes on the
|
|
* board one day, it will get more complicated...
|
|
*/
|
|
nand->ecc.mode = NAND_ECC_HW;
|
|
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
|
|
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
|
|
#else
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
#endif /* ! CONFIG_SYS_S3C_NAND_HWECC */
|
|
|
|
nand->priv = nand_cs + chip_n++;
|
|
|
|
return 0;
|
|
}
|