mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
0070459048
1. LS2085a provides PCIE_LUT_DBG register rather than PCIE_LDBG to show the link status, so the patch fixes it. 2. Increase the delay time to make sure that link training has finished. 3. Return invalid value when accessing multi-function device 4. For LS2085a DBI_RO_WR_EN bit is cleared as default, so we must set this bit before change DBI register value. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
530 lines
13 KiB
C
530 lines
13 KiB
C
/*
|
|
* Copyright 2014-2015 Freescale Semiconductor, Inc.
|
|
* Layerscape PCIe driver
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#include <pci.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
|
|
#ifndef CONFIG_SYS_PCI_MEMORY_BUS
|
|
#define CONFIG_SYS_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_PCI_MEMORY_PHYS
|
|
#define CONFIG_SYS_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_PCI_MEMORY_SIZE
|
|
#define CONFIG_SYS_PCI_MEMORY_SIZE (2 * 1024 * 1024 * 1024UL) /* 2G */
|
|
#endif
|
|
|
|
/* iATU registers */
|
|
#define PCIE_ATU_VIEWPORT 0x900
|
|
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
|
|
#define PCIE_ATU_REGION_INDEX3 (0x3 << 0)
|
|
#define PCIE_ATU_CR1 0x904
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_IO (0x2 << 0)
|
|
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
|
|
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
|
|
#define PCIE_ATU_CR2 0x908
|
|
#define PCIE_ATU_ENABLE (0x1 << 31)
|
|
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
|
|
#define PCIE_ATU_LOWER_BASE 0x90C
|
|
#define PCIE_ATU_UPPER_BASE 0x910
|
|
#define PCIE_ATU_LIMIT 0x914
|
|
#define PCIE_ATU_LOWER_TARGET 0x918
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
#define PCIE_ATU_UPPER_TARGET 0x91C
|
|
|
|
/* LUT registers */
|
|
#define PCIE_LUT_BASE 0x80000
|
|
#define PCIE_LUT_DBG 0x7FC
|
|
|
|
#define PCIE_DBI_RO_WR_EN 0x8bc
|
|
|
|
#define PCIE_LINK_CAP 0x7c
|
|
#define PCIE_LINK_SPEED_MASK 0xf
|
|
#define PCIE_LINK_STA 0x82
|
|
|
|
#define LTSSM_STATE_MASK 0x3f
|
|
#define LTSSM_PCIE_L0 0x11 /* L0 state */
|
|
|
|
#define PCIE_DBI_SIZE 0x100000 /* 1M */
|
|
|
|
struct ls_pcie {
|
|
int idx;
|
|
void __iomem *dbi;
|
|
void __iomem *va_cfg0;
|
|
void __iomem *va_cfg1;
|
|
struct pci_controller hose;
|
|
};
|
|
|
|
struct ls_pcie_info {
|
|
unsigned long regs;
|
|
int pci_num;
|
|
u64 cfg0_phys;
|
|
u64 cfg0_size;
|
|
u64 cfg1_phys;
|
|
u64 cfg1_size;
|
|
u64 mem_bus;
|
|
u64 mem_phys;
|
|
u64 mem_size;
|
|
u64 io_bus;
|
|
u64 io_phys;
|
|
u64 io_size;
|
|
};
|
|
|
|
#define SET_LS_PCIE_INFO(x, num) \
|
|
{ \
|
|
x.regs = CONFIG_SYS_PCIE##num##_ADDR; \
|
|
x.cfg0_phys = CONFIG_SYS_PCIE_CFG0_PHYS_OFF + \
|
|
CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
|
|
x.cfg0_size = CONFIG_SYS_PCIE_CFG0_SIZE; \
|
|
x.cfg1_phys = CONFIG_SYS_PCIE_CFG1_PHYS_OFF + \
|
|
CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
|
|
x.cfg1_size = CONFIG_SYS_PCIE_CFG1_SIZE; \
|
|
x.mem_bus = CONFIG_SYS_PCIE_MEM_BUS; \
|
|
x.mem_phys = CONFIG_SYS_PCIE_MEM_PHYS_OFF + \
|
|
CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
|
|
x.mem_size = CONFIG_SYS_PCIE_MEM_SIZE; \
|
|
x.io_bus = CONFIG_SYS_PCIE_IO_BUS; \
|
|
x.io_phys = CONFIG_SYS_PCIE_IO_PHYS_OFF + \
|
|
CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
|
|
x.io_size = CONFIG_SYS_PCIE_IO_SIZE; \
|
|
x.pci_num = num; \
|
|
}
|
|
|
|
#ifdef CONFIG_LS102XA
|
|
#include <asm/arch/immap_ls102xa.h>
|
|
|
|
/* PEX1/2 Misc Ports Status Register */
|
|
#define LTSSM_STATE_SHIFT 20
|
|
|
|
static int ls_pcie_link_state(struct ls_pcie *pcie)
|
|
{
|
|
u32 state;
|
|
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
|
|
state = in_be32(&scfg->pexmscportsr[pcie->idx]);
|
|
state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK;
|
|
if (state < LTSSM_PCIE_L0) {
|
|
debug("....PCIe link error. LTSSM=0x%02x.\n", state);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#else
|
|
static int ls_pcie_link_state(struct ls_pcie *pcie)
|
|
{
|
|
u32 state;
|
|
|
|
state = readl(pcie->dbi + PCIE_LUT_BASE + PCIE_LUT_DBG) &
|
|
LTSSM_STATE_MASK;
|
|
if (state < LTSSM_PCIE_L0) {
|
|
debug("....PCIe link error. LTSSM=0x%02x.\n", state);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
static int ls_pcie_link_up(struct ls_pcie *pcie)
|
|
{
|
|
int state;
|
|
u32 cap;
|
|
|
|
state = ls_pcie_link_state(pcie);
|
|
if (state)
|
|
return state;
|
|
|
|
/* Try to download speed to gen1 */
|
|
cap = readl(pcie->dbi + PCIE_LINK_CAP);
|
|
writel((cap & (~PCIE_LINK_SPEED_MASK)) | 1, pcie->dbi + PCIE_LINK_CAP);
|
|
/*
|
|
* Notice: the following delay has critical impact on link training
|
|
* if too short (<30ms) the link doesn't get up.
|
|
*/
|
|
mdelay(100);
|
|
state = ls_pcie_link_state(pcie);
|
|
if (state)
|
|
return state;
|
|
|
|
writel(cap, pcie->dbi + PCIE_LINK_CAP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ls_pcie_cfg0_set_busdev(struct ls_pcie *pcie, u32 busdev)
|
|
{
|
|
writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
pcie->dbi + PCIE_ATU_VIEWPORT);
|
|
writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET);
|
|
}
|
|
|
|
static void ls_pcie_cfg1_set_busdev(struct ls_pcie *pcie, u32 busdev)
|
|
{
|
|
writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
pcie->dbi + PCIE_ATU_VIEWPORT);
|
|
writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET);
|
|
}
|
|
|
|
static void ls_pcie_iatu_outbound_set(struct ls_pcie *pcie, int idx, int type,
|
|
u64 phys, u64 bus_addr, pci_size_t size)
|
|
{
|
|
writel(PCIE_ATU_REGION_OUTBOUND | idx, pcie->dbi + PCIE_ATU_VIEWPORT);
|
|
writel((u32)phys, pcie->dbi + PCIE_ATU_LOWER_BASE);
|
|
writel(phys >> 32, pcie->dbi + PCIE_ATU_UPPER_BASE);
|
|
writel(phys + size - 1, pcie->dbi + PCIE_ATU_LIMIT);
|
|
writel((u32)bus_addr, pcie->dbi + PCIE_ATU_LOWER_TARGET);
|
|
writel(bus_addr >> 32, pcie->dbi + PCIE_ATU_UPPER_TARGET);
|
|
writel(type, pcie->dbi + PCIE_ATU_CR1);
|
|
writel(PCIE_ATU_ENABLE, pcie->dbi + PCIE_ATU_CR2);
|
|
}
|
|
|
|
static void ls_pcie_setup_atu(struct ls_pcie *pcie, struct ls_pcie_info *info)
|
|
{
|
|
#ifdef DEBUG
|
|
int i;
|
|
#endif
|
|
|
|
/* ATU 0 : OUTBOUND : CFG0 */
|
|
ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_TYPE_CFG0,
|
|
info->cfg0_phys,
|
|
0,
|
|
info->cfg0_size);
|
|
/* ATU 1 : OUTBOUND : CFG1 */
|
|
ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_TYPE_CFG1,
|
|
info->cfg1_phys,
|
|
0,
|
|
info->cfg1_size);
|
|
/* ATU 2 : OUTBOUND : MEM */
|
|
ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX2,
|
|
PCIE_ATU_TYPE_MEM,
|
|
info->mem_phys,
|
|
info->mem_bus,
|
|
info->mem_size);
|
|
/* ATU 3 : OUTBOUND : IO */
|
|
ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX3,
|
|
PCIE_ATU_TYPE_IO,
|
|
info->io_phys,
|
|
info->io_bus,
|
|
info->io_size);
|
|
|
|
#ifdef DEBUG
|
|
for (i = 0; i <= PCIE_ATU_REGION_INDEX3; i++) {
|
|
writel(PCIE_ATU_REGION_OUTBOUND | i,
|
|
pcie->dbi + PCIE_ATU_VIEWPORT);
|
|
debug("iATU%d:\n", i);
|
|
debug("\tLOWER PHYS 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_LOWER_BASE));
|
|
debug("\tUPPER PHYS 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_UPPER_BASE));
|
|
debug("\tLOWER BUS 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_LOWER_TARGET));
|
|
debug("\tUPPER BUS 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_UPPER_TARGET));
|
|
debug("\tLIMIT 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_LIMIT));
|
|
debug("\tCR1 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_CR1));
|
|
debug("\tCR2 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_CR2));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
|
|
{
|
|
/* Do not skip controller */
|
|
return 0;
|
|
}
|
|
|
|
static int ls_pcie_addr_valid(struct pci_controller *hose, pci_dev_t d)
|
|
{
|
|
if (PCI_DEV(d) > 0)
|
|
return -EINVAL;
|
|
|
|
/* Controller does not support multi-function in RC mode */
|
|
if ((PCI_BUS(d) == hose->first_busno) && (PCI_FUNC(d) > 0))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ls_pcie_read_config(struct pci_controller *hose, pci_dev_t d,
|
|
int where, u32 *val)
|
|
{
|
|
struct ls_pcie *pcie = hose->priv_data;
|
|
u32 busdev, *addr;
|
|
|
|
if (ls_pcie_addr_valid(hose, d)) {
|
|
*val = 0xffffffff;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (PCI_BUS(d) == hose->first_busno) {
|
|
addr = pcie->dbi + (where & ~0x3);
|
|
} else {
|
|
busdev = PCIE_ATU_BUS(PCI_BUS(d)) |
|
|
PCIE_ATU_DEV(PCI_DEV(d)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(d));
|
|
|
|
if (PCI_BUS(d) == hose->first_busno + 1) {
|
|
ls_pcie_cfg0_set_busdev(pcie, busdev);
|
|
addr = pcie->va_cfg0 + (where & ~0x3);
|
|
} else {
|
|
ls_pcie_cfg1_set_busdev(pcie, busdev);
|
|
addr = pcie->va_cfg1 + (where & ~0x3);
|
|
}
|
|
}
|
|
|
|
*val = readl(addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ls_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
|
|
int where, u32 val)
|
|
{
|
|
struct ls_pcie *pcie = hose->priv_data;
|
|
u32 busdev, *addr;
|
|
|
|
if (ls_pcie_addr_valid(hose, d))
|
|
return -EINVAL;
|
|
|
|
if (PCI_BUS(d) == hose->first_busno) {
|
|
addr = pcie->dbi + (where & ~0x3);
|
|
} else {
|
|
busdev = PCIE_ATU_BUS(PCI_BUS(d)) |
|
|
PCIE_ATU_DEV(PCI_DEV(d)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(d));
|
|
|
|
if (PCI_BUS(d) == hose->first_busno + 1) {
|
|
ls_pcie_cfg0_set_busdev(pcie, busdev);
|
|
addr = pcie->va_cfg0 + (where & ~0x3);
|
|
} else {
|
|
ls_pcie_cfg1_set_busdev(pcie, busdev);
|
|
addr = pcie->va_cfg1 + (where & ~0x3);
|
|
}
|
|
}
|
|
|
|
writel(val, addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ls_pcie_setup_ctrl(struct ls_pcie *pcie,
|
|
struct ls_pcie_info *info)
|
|
{
|
|
struct pci_controller *hose = &pcie->hose;
|
|
pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
|
|
|
|
ls_pcie_setup_atu(pcie, info);
|
|
|
|
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0);
|
|
|
|
/* program correct class for RC */
|
|
writel(1, pcie->dbi + PCIE_DBI_RO_WR_EN);
|
|
pci_hose_write_config_word(hose, dev, PCI_CLASS_DEVICE,
|
|
PCI_CLASS_BRIDGE_PCI);
|
|
#ifndef CONFIG_LS102XA
|
|
writel(0, pcie->dbi + PCIE_DBI_RO_WR_EN);
|
|
#endif
|
|
}
|
|
|
|
int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
|
|
{
|
|
struct ls_pcie *pcie;
|
|
struct pci_controller *hose;
|
|
int num = dev - PCIE1;
|
|
pci_dev_t pdev = PCI_BDF(busno, 0, 0);
|
|
int i, linkup, ep_mode;
|
|
u8 header_type;
|
|
u16 temp16;
|
|
|
|
if (!is_serdes_configured(dev)) {
|
|
printf("PCIe%d: disabled\n", num + 1);
|
|
return busno;
|
|
}
|
|
|
|
pcie = malloc(sizeof(*pcie));
|
|
if (!pcie)
|
|
return busno;
|
|
memset(pcie, 0, sizeof(*pcie));
|
|
|
|
hose = &pcie->hose;
|
|
hose->priv_data = pcie;
|
|
hose->first_busno = busno;
|
|
pcie->idx = num;
|
|
pcie->dbi = map_physmem(info->regs, PCIE_DBI_SIZE, MAP_NOCACHE);
|
|
pcie->va_cfg0 = map_physmem(info->cfg0_phys,
|
|
info->cfg0_size,
|
|
MAP_NOCACHE);
|
|
pcie->va_cfg1 = map_physmem(info->cfg1_phys,
|
|
info->cfg1_size,
|
|
MAP_NOCACHE);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(&hose->regions[0],
|
|
(pci_size_t)info->mem_bus,
|
|
(phys_size_t)info->mem_phys,
|
|
(pci_size_t)info->mem_size,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(&hose->regions[1],
|
|
(pci_size_t)info->io_bus,
|
|
(phys_size_t)info->io_phys,
|
|
(pci_size_t)info->io_size,
|
|
PCI_REGION_IO);
|
|
|
|
/* System memory space */
|
|
pci_set_region(&hose->regions[2],
|
|
CONFIG_SYS_PCI_MEMORY_BUS,
|
|
CONFIG_SYS_PCI_MEMORY_PHYS,
|
|
CONFIG_SYS_PCI_MEMORY_SIZE,
|
|
PCI_REGION_SYS_MEMORY);
|
|
|
|
hose->region_count = 3;
|
|
|
|
for (i = 0; i < hose->region_count; i++)
|
|
debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n",
|
|
i,
|
|
(u64)hose->regions[i].phys_start,
|
|
(u64)hose->regions[i].bus_start,
|
|
(u64)hose->regions[i].size,
|
|
hose->regions[i].flags);
|
|
|
|
pci_set_ops(hose,
|
|
pci_hose_read_config_byte_via_dword,
|
|
pci_hose_read_config_word_via_dword,
|
|
ls_pcie_read_config,
|
|
pci_hose_write_config_byte_via_dword,
|
|
pci_hose_write_config_word_via_dword,
|
|
ls_pcie_write_config);
|
|
|
|
pci_hose_read_config_byte(hose, pdev, PCI_HEADER_TYPE, &header_type);
|
|
ep_mode = (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
|
|
printf("PCIe%u: %s ", info->pci_num,
|
|
ep_mode ? "Endpoint" : "Root Complex");
|
|
|
|
linkup = ls_pcie_link_up(pcie);
|
|
|
|
if (!linkup) {
|
|
/* Let the user know there's no PCIe link */
|
|
printf("no link, regs @ 0x%lx\n", info->regs);
|
|
hose->last_busno = hose->first_busno;
|
|
return busno;
|
|
}
|
|
|
|
/* Print the negotiated PCIe link width */
|
|
pci_hose_read_config_word(hose, pdev, PCIE_LINK_STA, &temp16);
|
|
printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4,
|
|
(temp16 & 0xf), info->regs);
|
|
|
|
if (ep_mode)
|
|
return busno;
|
|
|
|
ls_pcie_setup_ctrl(pcie, info);
|
|
|
|
pci_register_hose(hose);
|
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
|
|
printf("PCIe%x: Bus %02x - %02x\n",
|
|
info->pci_num, hose->first_busno, hose->last_busno);
|
|
|
|
return hose->last_busno + 1;
|
|
}
|
|
|
|
int ls_pcie_init_board(int busno)
|
|
{
|
|
struct ls_pcie_info info;
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
SET_LS_PCIE_INFO(info, 1);
|
|
busno = ls_pcie_init_ctrl(busno, PCIE1, &info);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
SET_LS_PCIE_INFO(info, 2);
|
|
busno = ls_pcie_init_ctrl(busno, PCIE2, &info);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
SET_LS_PCIE_INFO(info, 3);
|
|
busno = ls_pcie_init_ctrl(busno, PCIE3, &info);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE4
|
|
SET_LS_PCIE_INFO(info, 4);
|
|
busno = ls_pcie_init_ctrl(busno, PCIE4, &info);
|
|
#endif
|
|
|
|
return busno;
|
|
}
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
ls_pcie_init_board(0);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
|
|
static void ft_pcie_ls_setup(void *blob, const char *pci_compat,
|
|
unsigned long ctrl_addr, enum srds_prtcl dev)
|
|
{
|
|
int off;
|
|
|
|
off = fdt_node_offset_by_compat_reg(blob, pci_compat,
|
|
(phys_addr_t)ctrl_addr);
|
|
if (off < 0)
|
|
return;
|
|
|
|
if (!is_serdes_configured(dev))
|
|
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
|
|
}
|
|
|
|
void ft_pci_setup(void *blob, bd_t *bd)
|
|
{
|
|
#ifdef CONFIG_PCIE1
|
|
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE3_ADDR, PCIE3);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE4
|
|
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4);
|
|
#endif
|
|
}
|
|
|
|
#else
|
|
void ft_pci_setup(void *blob, bd_t *bd)
|
|
{
|
|
}
|
|
#endif
|