mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 16:53:06 +00:00
3356c67d1f
Radxa Compute Module 3(CM3) IO board an application board from Radxa and is compatible with Raspberry Pi CM4 IO form factor. Specification: - 1x HDMI, - 2x MIPI DSI - 2x MIPI CSI2 - 1x eDP - 1x PCIe card - 2x SATA - 2x USB 2.0 Host - 1x USB 3.0 - 1x USB 2.0 OTG - Phone jack - microSD slot - 40-pin GPIO expansion header - 12V DC Radxa CM3 needs to mount on top of this IO board in order to create complete Radxa CM3 IO board platform. linux-next commit for the same, commit <8f19828844f2> ("arm64: dts: rockchip: Fix compatible for Radxa CM3") Add support for Radxa CM3 IO Board. Co-developed-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
272 lines
5.6 KiB
Text
272 lines
5.6 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2022 Radxa Limited
|
|
* Copyright (c) 2022 Amarula Solutions(India)
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include "rk3566.dtsi"
|
|
#include "rk3566-radxa-cm3.dtsi"
|
|
|
|
/ {
|
|
model = "Radxa Compute Module 3(CM3) IO Board";
|
|
compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
|
|
|
|
aliases {
|
|
mmc1 = &sdmmc0;
|
|
};
|
|
|
|
chosen: chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
gmac1_clkin: external-gmac1-clock {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "gmac1_clkin";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
hdmi-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-1 {
|
|
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_ACTIVITY;
|
|
linux,default-trigger = "heartbeat";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pi_nled_activity>;
|
|
};
|
|
};
|
|
|
|
vcc5v0_usb30: vcc5v0-usb30-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb30";
|
|
enable-active-high;
|
|
gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_usb30_en_h>;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcca1v8_image: vcca1v8-image-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcca1v8_image";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_1v8_p>;
|
|
};
|
|
|
|
vdda0v9_image: vdda0v9-image-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcca0v9_image";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
vin-supply = <&vdda_0v9>;
|
|
};
|
|
};
|
|
|
|
&combphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac1 {
|
|
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
|
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
|
assigned-clock-rates = <0>, <125000000>;
|
|
clock_in_out = "input";
|
|
phy-handle = <&rgmii_phy1>;
|
|
phy-mode = "rgmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1m0_miim
|
|
&gmac1m0_tx_bus2
|
|
&gmac1m0_rx_bus2
|
|
&gmac1m0_rgmii_clk
|
|
&gmac1m0_rgmii_bus
|
|
&gmac1m0_clkinout>;
|
|
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
tx_delay = <0x46>;
|
|
rx_delay = <0x2e>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
avdd-0v9-supply = <&vdda0v9_image>;
|
|
avdd-1v8-supply = <&vcca1v8_image>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_in {
|
|
hdmi_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: ethernet-phy@0 {
|
|
compatible="ethernet-phy-ieee802.3-c22";
|
|
reg= <0x0>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
gmac1 {
|
|
gmac1m0_miim: gmac1m0-miim {
|
|
rockchip,pins =
|
|
/* gmac1_mdcm0 */
|
|
<3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_mdiom0 */
|
|
<3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
|
|
};
|
|
|
|
gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
|
|
rockchip,pins =
|
|
/* gmac1_rxd0m0 */
|
|
<3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_rxd1m0 */
|
|
<3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_rxdvcrsm0 */
|
|
<3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
|
|
};
|
|
|
|
gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
|
|
rockchip,pins =
|
|
/* gmac1_txd0m0 */
|
|
<3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_txd1m0 */
|
|
<3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_txenm0 */
|
|
<3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
|
|
};
|
|
|
|
gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
|
|
rockchip,pins =
|
|
/* gmac1_rxclkm0 */
|
|
<3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_txclkm0 */
|
|
<3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
|
|
};
|
|
|
|
gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
|
|
rockchip,pins =
|
|
/* gmac1_rxd2m0 */
|
|
<3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_rxd3m0 */
|
|
<3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_txd2m0 */
|
|
<3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
|
|
/* gmac1_txd3m0 */
|
|
<3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
|
|
};
|
|
|
|
gmac1m0_clkinout: gmac1m0-clkinout {
|
|
rockchip,pins =
|
|
/* gmac1_mclkinoutm0 */
|
|
<3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
pi_nled_activity: pi-nled-activity {
|
|
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdcard {
|
|
sdmmc_pwren: sdmmc-pwren {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_usb30_en_h: vcc5v0-host-en-h {
|
|
rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdmmc0 {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0_host {
|
|
phy-supply = <&vcc5v0_usb30>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1_host {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_xhci {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi_in_vp0>;
|
|
};
|
|
};
|