u-boot/cpu/mcf5227x/cpu_init.c
TsiChung Liew f6a309080b ColdFire: Fix compile warning messages
Change %08lX to %08X in board.c. Remove unused variable
'oscillator' in mcf5227x/cpu_init.c and 'scm2' in
mcf532x/cpu_init.c. Provide argument type cast in
drivers/dma/MCD_dmaApi.c.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-08-26 03:44:31 -05:00

206 lines
5.2 KiB
C

/*
*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <asm/immap.h>
#include <asm/rtc.h>
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
#if !defined(CONFIG_CF_SBF)
/* Workaround, must place before fbcs */
pll->psr = 0x12;
scm1->mpr = 0x77777777;
scm1->pacra = 0;
scm1->pacrb = 0;
scm1->pacrc = 0;
scm1->pacrd = 0;
scm1->pacre = 0;
scm1->pacrf = 0;
scm1->pacrg = 0;
scm1->pacri = 0;
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
&& defined(CONFIG_SYS_CS0_CTRL))
fbcs->csar0 = CONFIG_SYS_CS0_BASE;
fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
#endif
#endif /* CONFIG_CF_SBF */
#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
&& defined(CONFIG_SYS_CS1_CTRL))
fbcs->csar1 = CONFIG_SYS_CS1_BASE;
fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
#endif
#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
&& defined(CONFIG_SYS_CS2_CTRL))
fbcs->csar2 = CONFIG_SYS_CS2_BASE;
fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
#endif
#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
&& defined(CONFIG_SYS_CS3_CTRL))
fbcs->csar3 = CONFIG_SYS_CS3_BASE;
fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
#endif
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
&& defined(CONFIG_SYS_CS4_CTRL))
fbcs->csar4 = CONFIG_SYS_CS4_BASE;
fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
#endif
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
&& defined(CONFIG_SYS_CS5_CTRL))
fbcs->csar5 = CONFIG_SYS_CS5_BASE;
fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
#endif
#ifdef CONFIG_FSL_I2C
gpio->par_i2c = GPIO_PAR_I2C_SCL_SCL | GPIO_PAR_I2C_SDA_SDA;
#endif
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
#ifdef CONFIG_MCFRTC
volatile rtc_t *rtc = (volatile rtc_t *)(CONFIG_SYS_MCFRTC_BASE);
volatile rtcex_t *rtcex = (volatile rtcex_t *)&rtc->extended;
rtcex->gocu = (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xFFFF;
rtcex->gocl = CONFIG_SYS_RTC_OSCILLATOR & 0xFFFF;
#endif
return (0);
}
void uart_port_conf(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (CONFIG_SYS_UART_PORT) {
case 0:
gpio->par_uart &=
(GPIO_PAR_UART_U0TXD_MASK & GPIO_PAR_UART_U0RXD_MASK);
gpio->par_uart |=
(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
break;
case 1:
gpio->par_uart &=
(GPIO_PAR_UART_U1TXD_MASK & GPIO_PAR_UART_U1RXD_MASK);
gpio->par_uart |=
(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
break;
case 2:
gpio->par_dspi &=
(GPIO_PAR_DSPI_SIN_MASK & GPIO_PAR_DSPI_SOUT_MASK);
gpio->par_dspi =
(GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD);
break;
}
}
#ifdef CONFIG_CF_DSPI
void cfspi_port_conf(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
gpio->par_dspi =
GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT |
GPIO_PAR_DSPI_SCK_SCK;
}
int cfspi_claim_bus(uint bus, uint cs)
{
volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
if ((dspi->sr & DSPI_SR_TXRXS) != DSPI_SR_TXRXS)
return -1;
/* Clear FIFO and resume transfer */
dspi->mcr &= ~(DSPI_MCR_CTXF | DSPI_MCR_CRXF);
switch (cs) {
case 0:
gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_MASK;
gpio->par_dspi |= GPIO_PAR_DSPI_PCS0_PCS0;
break;
case 2:
gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK;
gpio->par_timer |= GPIO_PAR_TIMER_T2IN_DSPIPCS2;
break;
}
return 0;
}
void cfspi_release_bus(uint bus, uint cs)
{
volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
dspi->mcr &= ~(DSPI_MCR_CTXF | DSPI_MCR_CRXF); /* Clear FIFO */
switch (cs) {
case 0:
gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0;
break;
case 2:
gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK;
break;
}
}
#endif