mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
d19f6a60ec
These boards are still non-generic boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Murray Jensen <Murray.Jensen@csiro.au>
901 lines
24 KiB
ArmAsm
901 lines
24 KiB
ArmAsm
/*
|
|
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
|
|
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
|
|
* Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* U-Boot - Startup Code for MPC8260 PowerPC based Embedded Boards
|
|
*/
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
#include <mpc8260.h>
|
|
#include <version.h>
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/u-boot.h>
|
|
|
|
/* We don't want the MMU yet.
|
|
*/
|
|
#undef MSR_KERNEL
|
|
/* Floating Point enable, Machine Check and Recoverable Interr. */
|
|
#ifdef DEBUG
|
|
#define MSR_KERNEL (MSR_FP|MSR_RI)
|
|
#else
|
|
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
|
|
#endif
|
|
|
|
/*
|
|
* Set up GOT: Global Offset Table
|
|
*
|
|
* Use r12 to access the GOT
|
|
*/
|
|
START_GOT
|
|
GOT_ENTRY(_GOT2_TABLE_)
|
|
GOT_ENTRY(_FIXUP_TABLE_)
|
|
|
|
GOT_ENTRY(_start)
|
|
GOT_ENTRY(_start_of_vectors)
|
|
GOT_ENTRY(_end_of_vectors)
|
|
GOT_ENTRY(transfer_to_handler)
|
|
|
|
GOT_ENTRY(__init_end)
|
|
GOT_ENTRY(__bss_end)
|
|
GOT_ENTRY(__bss_start)
|
|
END_GOT
|
|
|
|
/*
|
|
* Version string - must be in data segment because MPC8260 uses the first
|
|
* 256 bytes for the Hard Reset Configuration Word table (see below).
|
|
* Similarly, can't have the U-Boot Magic Number as the first thing in
|
|
* the image - don't know how this will affect the image tools, but I guess
|
|
* I'll find out soon
|
|
*/
|
|
.data
|
|
.globl version_string
|
|
version_string:
|
|
.ascii U_BOOT_VERSION_STRING, "\0"
|
|
|
|
/*
|
|
* Hard Reset Configuration Word (HRCW) table
|
|
*
|
|
* The Hard Reset Configuration Word (HRCW) sets a number of useful things
|
|
* such as whether there is an external memory controller, whether the
|
|
* PowerPC core is disabled (i.e. only the communications processor is
|
|
* active, accessed by another CPU on the bus), whether using external
|
|
* arbitration, external bus mode, boot port size, core initial prefix,
|
|
* internal space base, boot memory space, etc.
|
|
*
|
|
* These things dictate where the processor begins execution, where the
|
|
* boot ROM appears in memory, the memory controller setup when access
|
|
* boot ROM, etc. The HRCW is *extremely* important.
|
|
*
|
|
* The HRCW is read from the bus during reset. One CPU on the bus will
|
|
* be a hard reset configuration master, any others will be hard reset
|
|
* configuration slaves. The master reads eight HRCWs from flash during
|
|
* reset - the first it uses for itself, the other 7 it communicates to
|
|
* up to 7 configuration slaves by some complicated mechanism, which is
|
|
* not really important here.
|
|
*
|
|
* The configuration master performs 32 successive reads starting at address
|
|
* 0 and incrementing by 8 each read (i.e. on 64 bit boundaries) but only 8
|
|
* bits is read, and always from byte lane D[0-7] (so that port size of the
|
|
* boot device does not matter). The first four reads form the 32 bit HRCW
|
|
* for the master itself. The second four reads form the HRCW for the first
|
|
* slave, and so on, up to seven slaves. The 32 bit HRCW is formed by
|
|
* concatenating the four bytes, with the first read placed in byte 0 (the
|
|
* most significant byte), and so on with the fourth read placed in byte 3
|
|
* (the least significant byte).
|
|
*/
|
|
#define _HRCW_TABLE_ENTRY(w) \
|
|
.fill 8,1,(((w)>>24)&0xff); \
|
|
.fill 8,1,(((w)>>16)&0xff); \
|
|
.fill 8,1,(((w)>> 8)&0xff); \
|
|
.fill 8,1,(((w) )&0xff)
|
|
.text
|
|
.globl _hrcw_table
|
|
_hrcw_table:
|
|
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_MASTER)
|
|
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE1)
|
|
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE2)
|
|
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE3)
|
|
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE4)
|
|
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE5)
|
|
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE6)
|
|
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE7)
|
|
/*
|
|
* After configuration, a system reset exception is executed using the
|
|
* vector at offset 0x100 relative to the base set by MSR[IP]. If MSR[IP]
|
|
* is 0, the base address is 0x00000000. If MSR[IP] is 1, the base address
|
|
* is 0xfff00000. In the case of a Power On Reset or Hard Reset, the value
|
|
* of MSR[IP] is determined by the CIP field in the HRCW.
|
|
*
|
|
* Other bits in the HRCW set up the Base Address and Port Size in BR0.
|
|
* This determines the location of the boot ROM (flash or EPROM) in the
|
|
* processor's address space at boot time. As long as the HRCW is set up
|
|
* so that we eventually end up executing the code below when the processor
|
|
* executes the reset exception, the actual values used should not matter.
|
|
*
|
|
* Once we have got here, the address mask in OR0 is cleared so that the
|
|
* bottom 32K of the boot ROM is effectively repeated all throughout the
|
|
* processor's address space, after which we can jump to the absolute
|
|
* address at which the boot ROM was linked at compile time, and proceed
|
|
* to initialise the memory controller without worrying if the rug will be
|
|
* pulled out from under us, so to speak (it will be fine as long as we
|
|
* configure BR0 with the same boot ROM link address).
|
|
*/
|
|
. = EXC_OFF_SYS_RESET
|
|
|
|
.globl _start
|
|
_start:
|
|
mfmsr r5 /* save msr contents */
|
|
|
|
#if defined(CONFIG_SYS_DEFAULT_IMMR)
|
|
lis r3, CONFIG_SYS_IMMR@h
|
|
ori r3, r3, CONFIG_SYS_IMMR@l
|
|
lis r4, CONFIG_SYS_DEFAULT_IMMR@h
|
|
stw r3, 0x1A8(r4)
|
|
#endif /* CONFIG_SYS_DEFAULT_IMMR */
|
|
|
|
/* Initialise the MPC8260 processor core */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
bl init_8260_core
|
|
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
/* When booting from ROM (Flash or EPROM), clear the */
|
|
/* Address Mask in OR0 so ROM appears everywhere */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
|
|
lwz r4, IM_OR0@l(r3)
|
|
li r5, 0x7fff
|
|
and r4, r4, r5
|
|
stw r4, IM_OR0@l(r3)
|
|
|
|
/* Calculate absolute address in FLASH and jump there */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
lis r3, CONFIG_SYS_MONITOR_BASE@h
|
|
ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
|
|
addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
|
|
mtlr r3
|
|
blr
|
|
|
|
in_flash:
|
|
#endif /* CONFIG_SYS_RAMBOOT */
|
|
|
|
/* initialize some things that are hard to access from C */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
lis r3, CONFIG_SYS_IMMR@h /* set up stack in internal DPRAM */
|
|
ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
|
|
li r0, 0 /* Make room for stack frame header and */
|
|
stwu r0, -4(r1) /* clear final stack frame so that */
|
|
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
|
|
|
|
/* let the C-code set up the rest */
|
|
/* */
|
|
/* Be careful to keep code relocatable ! */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
GET_GOT /* initialize GOT access */
|
|
|
|
/* r3: IMMR */
|
|
bl cpu_init_f /* run low-level CPU init code (in Flash)*/
|
|
|
|
#ifdef DEBUG
|
|
bl init_debug /* set up debugging stuff */
|
|
#endif
|
|
|
|
bl board_init_f /* run 1st part of board init code (in Flash)*/
|
|
|
|
/* NOTREACHED - board_init_f() does not return */
|
|
|
|
/*
|
|
* Vector Table
|
|
*/
|
|
|
|
.globl _start_of_vectors
|
|
_start_of_vectors:
|
|
|
|
/* Machine check */
|
|
STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
|
|
|
|
/* Data Storage exception. */
|
|
STD_EXCEPTION(0x300, DataStorage, UnknownException)
|
|
|
|
/* Instruction Storage exception. */
|
|
STD_EXCEPTION(0x400, InstStorage, UnknownException)
|
|
|
|
/* External Interrupt exception. */
|
|
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
|
|
|
|
/* Alignment exception. */
|
|
. = 0x600
|
|
Alignment:
|
|
EXCEPTION_PROLOG(SRR0, SRR1)
|
|
mfspr r4,DAR
|
|
stw r4,_DAR(r21)
|
|
mfspr r5,DSISR
|
|
stw r5,_DSISR(r21)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
|
|
|
|
/* Program check exception */
|
|
. = 0x700
|
|
ProgramCheck:
|
|
EXCEPTION_PROLOG(SRR0, SRR1)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
|
|
MSR_KERNEL, COPY_EE)
|
|
|
|
STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
|
|
|
|
/* I guess we could implement decrementer, and may have
|
|
* to someday for timekeeping.
|
|
*/
|
|
STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
|
|
|
|
STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
|
|
STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
|
|
STD_EXCEPTION(0xc00, SystemCall, UnknownException)
|
|
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
|
|
|
|
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
|
|
STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
|
|
|
|
STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
|
|
STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
|
|
STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
|
|
#ifdef DEBUG
|
|
. = 0x1300
|
|
/*
|
|
* This exception occurs when the program counter matches the
|
|
* Instruction Address Breakpoint Register (IABR).
|
|
*
|
|
* I want the cpu to halt if this occurs so I can hunt around
|
|
* with the debugger and look at things.
|
|
*
|
|
* When DEBUG is defined, both machine check enable (in the MSR)
|
|
* and checkstop reset enable (in the reset mode register) are
|
|
* turned off and so a checkstop condition will result in the cpu
|
|
* halting.
|
|
*
|
|
* I force the cpu into a checkstop condition by putting an illegal
|
|
* instruction here (at least this is the theory).
|
|
*
|
|
* well - that didnt work, so just do an infinite loop!
|
|
*/
|
|
1: b 1b
|
|
#else
|
|
STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
|
|
#endif
|
|
STD_EXCEPTION(0x1400, SMI, UnknownException)
|
|
|
|
STD_EXCEPTION(0x1500, Trap_15, UnknownException)
|
|
STD_EXCEPTION(0x1600, Trap_16, UnknownException)
|
|
STD_EXCEPTION(0x1700, Trap_17, UnknownException)
|
|
STD_EXCEPTION(0x1800, Trap_18, UnknownException)
|
|
STD_EXCEPTION(0x1900, Trap_19, UnknownException)
|
|
STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
|
|
STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
|
|
STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
|
|
STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
|
|
STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
|
|
STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
|
|
STD_EXCEPTION(0x2000, Trap_20, UnknownException)
|
|
STD_EXCEPTION(0x2100, Trap_21, UnknownException)
|
|
STD_EXCEPTION(0x2200, Trap_22, UnknownException)
|
|
STD_EXCEPTION(0x2300, Trap_23, UnknownException)
|
|
STD_EXCEPTION(0x2400, Trap_24, UnknownException)
|
|
STD_EXCEPTION(0x2500, Trap_25, UnknownException)
|
|
STD_EXCEPTION(0x2600, Trap_26, UnknownException)
|
|
STD_EXCEPTION(0x2700, Trap_27, UnknownException)
|
|
STD_EXCEPTION(0x2800, Trap_28, UnknownException)
|
|
STD_EXCEPTION(0x2900, Trap_29, UnknownException)
|
|
STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
|
|
STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
|
|
STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
|
|
STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
|
|
STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
|
|
STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
|
|
|
|
|
|
.globl _end_of_vectors
|
|
_end_of_vectors:
|
|
|
|
. = 0x3000
|
|
|
|
/*
|
|
* This code finishes saving the registers to the exception frame
|
|
* and jumps to the appropriate handler for the exception.
|
|
* Register r21 is pointer into trap frame, r1 has new stack pointer.
|
|
*/
|
|
.globl transfer_to_handler
|
|
transfer_to_handler:
|
|
stw r22,_NIP(r21)
|
|
lis r22,MSR_POW@h
|
|
andc r23,r23,r22
|
|
stw r23,_MSR(r21)
|
|
SAVE_GPR(7, r21)
|
|
SAVE_4GPRS(8, r21)
|
|
SAVE_8GPRS(12, r21)
|
|
SAVE_8GPRS(24, r21)
|
|
mflr r23
|
|
andi. r24,r23,0x3f00 /* get vector offset */
|
|
stw r24,TRAP(r21)
|
|
li r22,0
|
|
stw r22,RESULT(r21)
|
|
lwz r24,0(r23) /* virtual address of handler */
|
|
lwz r23,4(r23) /* where to go when done */
|
|
mtspr SRR0,r24
|
|
mtspr SRR1,r20
|
|
mtlr r23
|
|
SYNC
|
|
rfi /* jump to handler, enable MMU */
|
|
|
|
int_return:
|
|
mfmsr r28 /* Disable interrupts */
|
|
li r4,0
|
|
ori r4,r4,MSR_EE
|
|
andc r28,r28,r4
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r28
|
|
SYNC
|
|
lwz r2,_CTR(r1)
|
|
lwz r0,_LINK(r1)
|
|
mtctr r2
|
|
mtlr r0
|
|
lwz r2,_XER(r1)
|
|
lwz r0,_CCR(r1)
|
|
mtspr XER,r2
|
|
mtcrf 0xFF,r0
|
|
REST_10GPRS(3, r1)
|
|
REST_10GPRS(13, r1)
|
|
REST_8GPRS(23, r1)
|
|
REST_GPR(31, r1)
|
|
lwz r2,_NIP(r1) /* Restore environment */
|
|
lwz r0,_MSR(r1)
|
|
mtspr SRR0,r2
|
|
mtspr SRR1,r0
|
|
lwz r0,GPR0(r1)
|
|
lwz r2,GPR2(r1)
|
|
lwz r1,GPR1(r1)
|
|
SYNC
|
|
rfi
|
|
|
|
/*
|
|
* This code initialises the MPC8260 processor core
|
|
* (conforms to PowerPC 603e spec)
|
|
* Note: expects original MSR contents to be in r5.
|
|
*/
|
|
|
|
.globl init_8260_core
|
|
init_8260_core:
|
|
|
|
/* Initialize machine status; enable machine check interrupt */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
li r3, MSR_KERNEL /* Set ME and RI flags */
|
|
rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
|
|
#ifdef DEBUG
|
|
rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
|
|
#endif
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r3
|
|
SYNC
|
|
mtspr SRR1, r3 /* Make SRR1 match MSR */
|
|
|
|
/* Initialise the SYPCR early, and reset the watchdog (if req) */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
|
|
lis r4, CONFIG_SYS_SYPCR@h
|
|
ori r4, r4, CONFIG_SYS_SYPCR@l
|
|
stw r4, IM_SYPCR@l(r3)
|
|
#if defined(CONFIG_WATCHDOG)
|
|
li r4, 21868 /* = 0x556c */
|
|
sth r4, IM_SWSR@l(r3)
|
|
li r4, -21959 /* = 0xaa39 */
|
|
sth r4, IM_SWSR@l(r3)
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
/* Initialize the Hardware Implementation-dependent Registers */
|
|
/* HID0 also contains cache control */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
lis r3, CONFIG_SYS_HID0_INIT@h
|
|
ori r3, r3, CONFIG_SYS_HID0_INIT@l
|
|
SYNC
|
|
mtspr HID0, r3
|
|
|
|
lis r3, CONFIG_SYS_HID0_FINAL@h
|
|
ori r3, r3, CONFIG_SYS_HID0_FINAL@l
|
|
SYNC
|
|
mtspr HID0, r3
|
|
|
|
lis r3, CONFIG_SYS_HID2@h
|
|
ori r3, r3, CONFIG_SYS_HID2@l
|
|
mtspr HID2, r3
|
|
|
|
/* clear all BAT's */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
li r0, 0
|
|
mtspr DBAT0U, r0
|
|
mtspr DBAT0L, r0
|
|
mtspr DBAT1U, r0
|
|
mtspr DBAT1L, r0
|
|
mtspr DBAT2U, r0
|
|
mtspr DBAT2L, r0
|
|
mtspr DBAT3U, r0
|
|
mtspr DBAT3L, r0
|
|
mtspr IBAT0U, r0
|
|
mtspr IBAT0L, r0
|
|
mtspr IBAT1U, r0
|
|
mtspr IBAT1L, r0
|
|
mtspr IBAT2U, r0
|
|
mtspr IBAT2L, r0
|
|
mtspr IBAT3U, r0
|
|
mtspr IBAT3L, r0
|
|
SYNC
|
|
|
|
/* invalidate all tlb's */
|
|
/* */
|
|
/* From the 603e User Manual: "The 603e provides the ability to */
|
|
/* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
|
|
/* instruction invalidates the TLB entry indexed by the EA, and */
|
|
/* operates on both the instruction and data TLBs simultaneously*/
|
|
/* invalidating four TLB entries (both sets in each TLB). The */
|
|
/* index corresponds to bits 15-19 of the EA. To invalidate all */
|
|
/* entries within both TLBs, 32 tlbie instructions should be */
|
|
/* issued, incrementing this field by one each time." */
|
|
/* */
|
|
/* "Note that the tlbia instruction is not implemented on the */
|
|
/* 603e." */
|
|
/* */
|
|
/* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
|
|
/* incrementing by 0x1000 each time. The code below is sort of */
|
|
/* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
|
|
/* */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
li r3, 32
|
|
mtctr r3
|
|
li r3, 0
|
|
1: tlbie r3
|
|
addi r3, r3, 0x1000
|
|
bdnz 1b
|
|
SYNC
|
|
|
|
/* Done! */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
blr
|
|
|
|
#ifdef DEBUG
|
|
|
|
/*
|
|
* initialise things related to debugging.
|
|
*
|
|
* must be called after the global offset table (GOT) is initialised
|
|
* (GET_GOT) and after cpu_init_f() has executed.
|
|
*/
|
|
|
|
.globl init_debug
|
|
init_debug:
|
|
|
|
lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
|
|
|
|
/* Quick and dirty hack to enable the RAM and copy the */
|
|
/* vectors so that we can take exceptions. */
|
|
/*--------------------------------------------------------------*/
|
|
/* write Memory Refresh Prescaler */
|
|
li r4, CONFIG_SYS_MPTPR
|
|
sth r4, IM_MPTPR@l(r3)
|
|
/* write 60x Refresh Timer */
|
|
li r4, CONFIG_SYS_PSRT
|
|
stb r4, IM_PSRT@l(r3)
|
|
/* init the 60x SDRAM Mode Register */
|
|
lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@h
|
|
ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@l
|
|
stw r4, IM_PSDMR@l(r3)
|
|
/* write Precharge All Banks command */
|
|
lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@h
|
|
ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@l
|
|
stw r4, IM_PSDMR@l(r3)
|
|
stb r0, 0(0)
|
|
/* write eight CBR Refresh commands */
|
|
lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@h
|
|
ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@l
|
|
stw r4, IM_PSDMR@l(r3)
|
|
stb r0, 0(0)
|
|
stb r0, 0(0)
|
|
stb r0, 0(0)
|
|
stb r0, 0(0)
|
|
stb r0, 0(0)
|
|
stb r0, 0(0)
|
|
stb r0, 0(0)
|
|
stb r0, 0(0)
|
|
/* write Mode Register Write command */
|
|
lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@h
|
|
ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@l
|
|
stw r4, IM_PSDMR@l(r3)
|
|
stb r0, 0(0)
|
|
/* write Normal Operation command and enable Refresh */
|
|
lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@h
|
|
ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@l
|
|
stw r4, IM_PSDMR@l(r3)
|
|
stb r0, 0(0)
|
|
/* RAM should now be operational */
|
|
|
|
#define VEC_WRD_CNT ((_end_of_vectors - _start + EXC_OFF_SYS_RESET) / 4)
|
|
mflr r3
|
|
GET_GOT
|
|
mtlr r3
|
|
lwz r3, GOT(_end_of_vectors)
|
|
rlwinm r4, r3, 0, 18, 31 /* _end_of_vectors & 0x3FFF */
|
|
lis r5, VEC_WRD_CNT@h
|
|
ori r5, r5, VEC_WRD_CNT@l
|
|
mtctr r5
|
|
1:
|
|
lwzu r5, -4(r3)
|
|
stwu r5, -4(r4)
|
|
bdnz 1b
|
|
|
|
/* Load the Instruction Address Breakpoint Register (IABR). */
|
|
/* */
|
|
/* The address to load is stored in the first word of dual port */
|
|
/* ram and should be preserved while the power is on, so you */
|
|
/* can plug addresses into that location then reset the cpu and */
|
|
/* this code will load that address into the IABR after the */
|
|
/* reset. */
|
|
/* */
|
|
/* When the program counter matches the contents of the IABR, */
|
|
/* an exception is generated (before the instruction at that */
|
|
/* location completes). The vector for this exception is 0x1300 */
|
|
/*--------------------------------------------------------------*/
|
|
lis r3, CONFIG_SYS_IMMR@h
|
|
lwz r3, 0(r3)
|
|
mtspr IABR, r3
|
|
|
|
/* Set the entire dual port RAM (where the initial stack */
|
|
/* resides) to a known value - makes it easier to see where */
|
|
/* the stack has been written */
|
|
/*--------------------------------------------------------------*/
|
|
lis r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@h
|
|
ori r3, r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@l
|
|
li r4, ((CONFIG_SYS_INIT_SP_OFFSET - 4) / 4)
|
|
mtctr r4
|
|
lis r4, 0xdeadbeaf@h
|
|
ori r4, r4, 0xdeadbeaf@l
|
|
1:
|
|
stwu r4, -4(r3)
|
|
bdnz 1b
|
|
|
|
/* Done! */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
blr
|
|
#endif
|
|
|
|
/* Cache functions.
|
|
*
|
|
* Note: requires that all cache bits in
|
|
* HID0 are in the low half word.
|
|
*/
|
|
.globl icache_enable
|
|
icache_enable:
|
|
mfspr r3, HID0
|
|
ori r3, r3, HID0_ICE
|
|
lis r4, 0
|
|
ori r4, r4, HID0_ILOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_ICFI
|
|
isync
|
|
mtspr HID0, r4 /* sets enable and invalidate, clears lock */
|
|
isync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl icache_disable
|
|
icache_disable:
|
|
mfspr r3, HID0
|
|
lis r4, 0
|
|
ori r4, r4, HID0_ICE|HID0_ILOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_ICFI
|
|
isync
|
|
mtspr HID0, r4 /* sets invalidate, clears enable and lock */
|
|
isync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl icache_status
|
|
icache_status:
|
|
mfspr r3, HID0
|
|
rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
|
|
blr
|
|
|
|
.globl dcache_enable
|
|
dcache_enable:
|
|
mfspr r3, HID0
|
|
ori r3, r3, HID0_DCE
|
|
lis r4, 0
|
|
ori r4, r4, HID0_DLOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_DCI
|
|
sync
|
|
mtspr HID0, r4 /* sets enable and invalidate, clears lock */
|
|
sync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl dcache_disable
|
|
dcache_disable:
|
|
mfspr r3, HID0
|
|
lis r4, 0
|
|
ori r4, r4, HID0_DCE|HID0_DLOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_DCI
|
|
sync
|
|
mtspr HID0, r4 /* sets invalidate, clears enable and lock */
|
|
sync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl dcache_status
|
|
dcache_status:
|
|
mfspr r3, HID0
|
|
rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
|
|
blr
|
|
|
|
.globl get_pvr
|
|
get_pvr:
|
|
mfspr r3, PVR
|
|
blr
|
|
|
|
/*------------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* void relocate_code (addr_sp, gd, addr_moni)
|
|
*
|
|
* This "function" does not return, instead it continues in RAM
|
|
* after relocating the monitor code.
|
|
*
|
|
* r3 = dest
|
|
* r4 = src
|
|
* r5 = length in bytes
|
|
* r6 = cachelinesize
|
|
*/
|
|
.globl relocate_code
|
|
relocate_code:
|
|
mr r1, r3 /* Set new stack pointer */
|
|
mr r9, r4 /* Save copy of Global Data pointer */
|
|
mr r10, r5 /* Save copy of Destination Address */
|
|
|
|
GET_GOT
|
|
mr r3, r5 /* Destination Address */
|
|
lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
|
|
ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
|
|
lwz r5, GOT(__init_end)
|
|
sub r5, r5, r4
|
|
li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
|
|
|
|
/*
|
|
* Fix GOT pointer:
|
|
*
|
|
* New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
|
|
*
|
|
* Offset:
|
|
*/
|
|
sub r15, r10, r4
|
|
|
|
/* First our own GOT */
|
|
add r12, r12, r15
|
|
/* then the one used by the C code */
|
|
add r30, r30, r15
|
|
|
|
/*
|
|
* Now relocate code
|
|
*/
|
|
|
|
cmplw cr1,r3,r4
|
|
addi r0,r5,3
|
|
srwi. r0,r0,2
|
|
beq cr1,4f /* In place copy is not necessary */
|
|
beq 7f /* Protect against 0 count */
|
|
mtctr r0
|
|
bge cr1,2f
|
|
|
|
la r8,-4(r4)
|
|
la r7,-4(r3)
|
|
1: lwzu r0,4(r8)
|
|
stwu r0,4(r7)
|
|
bdnz 1b
|
|
b 4f
|
|
|
|
2: slwi r0,r0,2
|
|
add r8,r4,r0
|
|
add r7,r3,r0
|
|
3: lwzu r0,-4(r8)
|
|
stwu r0,-4(r7)
|
|
bdnz 3b
|
|
|
|
/*
|
|
* Now flush the cache: note that we must start from a cache aligned
|
|
* address. Otherwise we might miss one cache line.
|
|
*/
|
|
4: cmpwi r6,0
|
|
add r5,r3,r5
|
|
beq 7f /* Always flush prefetch queue in any case */
|
|
subi r0,r6,1
|
|
andc r3,r3,r0
|
|
mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
|
|
rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
|
|
cmpwi r7,0
|
|
beq 9f
|
|
mr r4,r3
|
|
5: dcbst 0,r4
|
|
add r4,r4,r6
|
|
cmplw r4,r5
|
|
blt 5b
|
|
sync /* Wait for all dcbst to complete on bus */
|
|
9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
|
|
rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
|
|
cmpwi r7,0
|
|
beq 7f
|
|
mr r4,r3
|
|
6: icbi 0,r4
|
|
add r4,r4,r6
|
|
cmplw r4,r5
|
|
blt 6b
|
|
7: sync /* Wait for all icbi to complete on bus */
|
|
isync
|
|
|
|
/*
|
|
* We are done. Do not return, instead branch to second part of board
|
|
* initialization, now running from RAM.
|
|
*/
|
|
|
|
addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
|
|
mtlr r0
|
|
blr
|
|
|
|
in_ram:
|
|
|
|
/*
|
|
* Relocation Function, r12 point to got2+0x8000
|
|
*
|
|
* Adjust got2 pointers, no need to check for 0, this code
|
|
* already puts a few entries in the table.
|
|
*/
|
|
li r0,__got2_entries@sectoff@l
|
|
la r3,GOT(_GOT2_TABLE_)
|
|
lwz r11,GOT(_GOT2_TABLE_)
|
|
mtctr r0
|
|
sub r11,r3,r11
|
|
addi r3,r3,-4
|
|
1: lwzu r0,4(r3)
|
|
cmpwi r0,0
|
|
beq- 2f
|
|
add r0,r0,r11
|
|
stw r0,0(r3)
|
|
2: bdnz 1b
|
|
|
|
/*
|
|
* Now adjust the fixups and the pointers to the fixups
|
|
* in case we need to move ourselves again.
|
|
*/
|
|
li r0,__fixup_entries@sectoff@l
|
|
lwz r3,GOT(_FIXUP_TABLE_)
|
|
cmpwi r0,0
|
|
mtctr r0
|
|
addi r3,r3,-4
|
|
beq 4f
|
|
3: lwzu r4,4(r3)
|
|
lwzux r0,r4,r11
|
|
cmpwi r0,0
|
|
add r0,r0,r11
|
|
stw r4,0(r3)
|
|
beq- 5f
|
|
stw r0,0(r4)
|
|
5: bdnz 3b
|
|
4:
|
|
clear_bss:
|
|
/*
|
|
* Now clear BSS segment
|
|
*/
|
|
lwz r3,GOT(__bss_start)
|
|
lwz r4,GOT(__bss_end)
|
|
|
|
cmplw 0, r3, r4
|
|
beq 6f
|
|
|
|
li r0, 0
|
|
5:
|
|
stw r0, 0(r3)
|
|
addi r3, r3, 4
|
|
cmplw 0, r3, r4
|
|
bne 5b
|
|
6:
|
|
|
|
mr r3, r9 /* Global Data pointer */
|
|
mr r4, r10 /* Destination Address */
|
|
bl board_init_r
|
|
|
|
/*
|
|
* Copy exception vector code to low memory
|
|
*
|
|
* r3: dest_addr
|
|
* r7: source address, r8: end address, r9: target address
|
|
*/
|
|
.globl trap_init
|
|
trap_init:
|
|
mflr r4 /* save link register */
|
|
GET_GOT
|
|
lwz r7, GOT(_start)
|
|
lwz r8, GOT(_end_of_vectors)
|
|
|
|
li r9, 0x100 /* reset vector always at 0x100 */
|
|
|
|
cmplw 0, r7, r8
|
|
bgelr /* return if r7>=r8 - just in case */
|
|
1:
|
|
lwz r0, 0(r7)
|
|
stw r0, 0(r9)
|
|
addi r7, r7, 4
|
|
addi r9, r9, 4
|
|
cmplw 0, r7, r8
|
|
bne 1b
|
|
|
|
/*
|
|
* relocate `hdlr' and `int_return' entries
|
|
*/
|
|
li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
|
|
li r8, Alignment - _start + EXC_OFF_SYS_RESET
|
|
2:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 2b
|
|
|
|
li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
|
|
bl trap_reloc
|
|
|
|
li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
|
|
bl trap_reloc
|
|
|
|
li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
|
|
li r8, SystemCall - _start + EXC_OFF_SYS_RESET
|
|
3:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 3b
|
|
|
|
li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
|
|
li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
|
|
4:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 4b
|
|
|
|
mfmsr r3 /* now that the vectors have */
|
|
lis r7, MSR_IP@h /* relocated into low memory */
|
|
ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
|
|
andc r3, r3, r7 /* (if it was on) */
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r3
|
|
SYNC
|
|
|
|
mtlr r4 /* restore link register */
|
|
blr
|