u-boot/arch/arm/cpu/armv7/mx5/soc.c
Liu Hui-R64343 595f3e5645 MX5: Add initial support for MX53 processor
Add initial support for Freescale MX53 processor,

- Add the iomux support and the pin definition,
- Add the regs definition, clean up some unused def from mx51,
- Add the low level init support, make use the freq input of setup_pll macro

Signed-off-by: Jason Liu  <r64343@freescale.com>
2011-02-02 00:54:41 +01:00

146 lines
3 KiB
C

/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/errno.h>
#include <asm/io.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
#error "CPU_TYPE not defined"
#endif
u32 get_cpu_rev(void)
{
#ifdef CONFIG_MX51
int system_rev = 0x51000;
#else
int system_rev = 0x53000;
#endif
int reg = __raw_readl(ROM_SI_REV);
#if defined(CONFIG_MX51)
switch (reg) {
case 0x02:
system_rev |= CHIP_REV_1_1;
break;
case 0x10:
if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
system_rev |= CHIP_REV_2_5;
else
system_rev |= CHIP_REV_2_0;
break;
case 0x20:
system_rev |= CHIP_REV_3_0;
break;
default:
system_rev |= CHIP_REV_1_0;
break;
}
#else
switch (reg) {
case 0x20:
system_rev |= CHIP_REV_2_0;
break;
default:
system_rev |= CHIP_REV_1_0;
break;
}
#endif
return system_rev;
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
u32 cpurev;
cpurev = get_cpu_rev();
printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n",
(cpurev & 0xFF000) >> 12,
(cpurev & 0x000F0) >> 4,
(cpurev & 0x0000F) >> 0,
mxc_get_clock(MXC_ARM_CLK) / 1000000);
return 0;
}
#endif
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
#if defined(CONFIG_FEC_MXC)
extern int fecmxc_initialize(bd_t *bis);
#endif
int cpu_eth_init(bd_t *bis)
{
int rc = -ENODEV;
#if defined(CONFIG_FEC_MXC)
rc = fecmxc_initialize(bis);
#endif
return rc;
}
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(unsigned char *mac)
{
int i;
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
struct fuse_bank *bank = &iim->bank[1];
struct fuse_bank1_regs *fuse =
(struct fuse_bank1_regs *)bank->fuse_regs;
for (i = 0; i < 6; i++)
mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
}
#endif
/*
* Initializes on-chip MMC controllers.
* to override, implement board_mmc_init()
*/
int cpu_mmc_init(bd_t *bis)
{
#ifdef CONFIG_FSL_ESDHC
return fsl_esdhc_mmc_init(bis);
#else
return 0;
#endif
}
void reset_cpu(ulong addr)
{
__raw_writew(4, WDOG1_BASE_ADDR);
}