u-boot/arch/arm/dts/uniphier-pxs3-ref.dts
Kunihiko Hayashi 051451ad83 ARM: dts: uniphier: Sync DT with Linux v6.2
Synchronize devicetree sources with Linux v6.2.

- Use GIC interrupt definitions
- Add reg properties in USB-glue and SoC-glue node
- Fix node names to follow the generic names list in DT specification
- Add L2 cache and AHCI nodes
- Update nand and pcie nodes
- And some trivial fixes

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>
2023-03-06 17:05:40 -05:00

162 lines
2 KiB
Text

// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
// Device Tree Source for UniPhier PXs3 Reference Board
//
// Copyright (C) 2017 Socionext Inc.
// Author: Masahiro Yamada <yamada.masahiro@socionext.com>
/dts-v1/;
#include "uniphier-pxs3.dtsi"
#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier PXs3 Reference Board";
compatible = "socionext,uniphier-pxs3-ref", "socionext,uniphier-pxs3";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
serial0 = &serial0;
serial1 = &serialsc;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c6 = &i2c6;
spi0 = &spi0;
spi1 = &spi1;
ethernet0 = &eth0;
ethernet1 = &eth1;
};
memory@80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0xa0000000>;
};
};
&ethsc {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
};
&serialsc {
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
};
&spi0 {
status = "okay";
};
&spi1 {
status = "okay";
};
&serial0 {
status = "okay";
};
&serial2 {
status = "okay";
};
&serial3 {
status = "okay";
};
&gpio {
xirq4-hog {
gpio-hog;
gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
input;
};
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&sd {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&ethphy0>;
};
&mdio0 {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth1 {
status = "okay";
phy-handle = <&ethphy1>;
};
&mdio1 {
ethphy1: ethernet-phy@0 {
reg = <0>;
};
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
&pcie {
status = "okay";
};
&nand {
status = "okay";
nand@0 {
reg = <0>;
};
};
&ahci0 {
status = "okay";
};
&ahci1 {
status = "okay";
};
&pinctrl_ether_rgmii {
tx {
pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1",
"RGMII0_TXD2", "RGMII0_TXD3", "RGMII0_TXCTL";
drive-strength = <9>;
};
};
&pinctrl_ether1_rgmii {
tx {
pins = "RGMII1_TXCLK", "RGMII1_TXD0", "RGMII1_TXD1",
"RGMII1_TXD2", "RGMII1_TXD3", "RGMII1_TXCTL";
drive-strength = <9>;
};
};