u-boot/drivers/mtd/spi/spi_flash_internal.h
Haavard Skinnemoen d25ce7d24c SPI Flash subsystem
This adds a new SPI flash subsystem.

Currently, only AT45 DataFlash in non-power-of-two mode is supported,
but some preliminary support for other flash types is in place as
well.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-03 20:31:34 +02:00

45 lines
1.5 KiB
C

/*
* SPI flash internal definitions
*
* Copyright (C) 2008 Atmel Corporation
*/
/* Common parameters */
#define SPI_FLASH_PROG_TIMEOUT ((10 * CFG_HZ) / 1000)
#define SPI_FLASH_PAGE_ERASE_TIMEOUT ((50 * CFG_HZ) / 1000)
#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CFG_HZ)
/* Common commands */
#define CMD_READ_ID 0x9f
#define CMD_READ_ARRAY_SLOW 0x03
#define CMD_READ_ARRAY_FAST 0x0b
#define CMD_READ_ARRAY_LEGACY 0xe8
/* Send a single-byte command to the device and read the response */
int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
/*
* Send a multi-byte command to the device and read the response. Used
* for flash array reads, etc.
*/
int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
/*
* Send a multi-byte command to the device followed by (optional)
* data. Used for programming the flash array, etc.
*/
int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
const void *data, size_t data_len);
/*
* Same as spi_flash_cmd_read() except it also claims/releases the SPI
* bus. Used as common part of the ->read() operation.
*/
int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
/* Manufacturer-specific probe functions */
struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);