u-boot/arch/arm/include/asm/global_data.h
Heiko Schocher f1d2b313c9 ARM: add relocation support
!! This breaks support for all arm boards !!

To compile in old style, you must define
CONFIG_SYS_ARM_WITHOUT_RELOC or you can compile
with "CONFIG_SYS_ARM_WITHOUT_RELOC=1 ./MAKEALL board"

!! This define will be removed soon, so convert your
board to use relocation support

Portions of this work were supported by funding from
the CE Linux Forum.

Signed-off-by: Heiko Schocher <hs@denx.de>

Fix boot from NAND for non-ARM systems
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-19 19:29:53 +02:00

79 lines
2.9 KiB
C

/*
* (C) Copyright 2002-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
/*
* The following data structure is placed in some memory wich is
* available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
* some locked parts of the data cache) to allow for a minimum set of
* global variables during system initialization (until we have set
* up the memory controller so that we can use RAM).
*
* Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
*/
typedef struct global_data {
bd_t *bd;
unsigned long flags;
unsigned long baudrate;
unsigned long have_console; /* serial_init() was called */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
unsigned long fb_base; /* base address of frame buffer */
#ifdef CONFIG_VFD
unsigned char vfd_type; /* display type */
#endif
#ifdef CONFIG_FSL_ESDHC
unsigned long sdhc_clk;
#endif
#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
unsigned long relocaddr; /* Start address of U-Boot in RAM */
phys_size_t ram_size; /* RAM size */
unsigned long mon_len; /* monitor len */
unsigned long irq_sp; /* irq stack pointer */
unsigned long start_addr_sp; /* start_addr_stackpointer */
unsigned long reloc_off;
#if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
unsigned long tlb_addr;
#endif
#endif
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
} gd_t;
/*
* Global Data Flags
*/
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
#define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")
#endif /* __ASM_GBL_DATA_H */