u-boot/drivers/net/pcnet.c
Shinya Kuribayashi 3b904ccb93 net: Conditional COBJS inclusion of network drivers
Replace COBJS-y with appropriate driver config names.

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-06-09 23:21:05 -07:00

536 lines
13 KiB
C

/*
* (C) Copyright 2002 Wolfgang Grandegger, wg@denx.de.
*
* This driver for AMD PCnet network controllers is derived from the
* Linux driver pcnet32.c written 1996-1999 by Thomas Bogendoerfer.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <asm/io.h>
#include <pci.h>
#if 0
#define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */
#endif
#if PCNET_DEBUG_LEVEL > 0
#define PCNET_DEBUG1(fmt,args...) printf (fmt ,##args)
#if PCNET_DEBUG_LEVEL > 1
#define PCNET_DEBUG2(fmt,args...) printf (fmt ,##args)
#else
#define PCNET_DEBUG2(fmt,args...)
#endif
#else
#define PCNET_DEBUG1(fmt,args...)
#define PCNET_DEBUG2(fmt,args...)
#endif
#if !defined(CONF_PCNET_79C973) && defined(CONF_PCNET_79C975)
#error "Macro for PCnet chip version is not defined!"
#endif
/*
* Set the number of Tx and Rx buffers, using Log_2(# buffers).
* Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
* That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
*/
#define PCNET_LOG_TX_BUFFERS 0
#define PCNET_LOG_RX_BUFFERS 2
#define TX_RING_SIZE (1 << (PCNET_LOG_TX_BUFFERS))
#define TX_RING_LEN_BITS ((PCNET_LOG_TX_BUFFERS) << 12)
#define RX_RING_SIZE (1 << (PCNET_LOG_RX_BUFFERS))
#define RX_RING_LEN_BITS ((PCNET_LOG_RX_BUFFERS) << 4)
#define PKT_BUF_SZ 1544
/* The PCNET Rx and Tx ring descriptors. */
struct pcnet_rx_head {
u32 base;
s16 buf_length;
s16 status;
u32 msg_length;
u32 reserved;
};
struct pcnet_tx_head {
u32 base;
s16 length;
s16 status;
u32 misc;
u32 reserved;
};
/* The PCNET 32-Bit initialization block, described in databook. */
struct pcnet_init_block {
u16 mode;
u16 tlen_rlen;
u8 phys_addr[6];
u16 reserved;
u32 filter[2];
/* Receive and transmit ring base, along with extra bits. */
u32 rx_ring;
u32 tx_ring;
u32 reserved2;
};
typedef struct pcnet_priv {
struct pcnet_rx_head rx_ring[RX_RING_SIZE];
struct pcnet_tx_head tx_ring[TX_RING_SIZE];
struct pcnet_init_block init_block;
/* Receive Buffer space */
unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
int cur_rx;
int cur_tx;
} pcnet_priv_t;
static pcnet_priv_t *lp;
/* Offsets from base I/O address for WIO mode */
#define PCNET_RDP 0x10
#define PCNET_RAP 0x12
#define PCNET_RESET 0x14
#define PCNET_BDP 0x16
static u16 pcnet_read_csr (struct eth_device *dev, int index)
{
outw (index, dev->iobase + PCNET_RAP);
return inw (dev->iobase + PCNET_RDP);
}
static void pcnet_write_csr (struct eth_device *dev, int index, u16 val)
{
outw (index, dev->iobase + PCNET_RAP);
outw (val, dev->iobase + PCNET_RDP);
}
static u16 pcnet_read_bcr (struct eth_device *dev, int index)
{
outw (index, dev->iobase + PCNET_RAP);
return inw (dev->iobase + PCNET_BDP);
}
static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val)
{
outw (index, dev->iobase + PCNET_RAP);
outw (val, dev->iobase + PCNET_BDP);
}
static void pcnet_reset (struct eth_device *dev)
{
inw (dev->iobase + PCNET_RESET);
}
static int pcnet_check (struct eth_device *dev)
{
outw (88, dev->iobase + PCNET_RAP);
return (inw (dev->iobase + PCNET_RAP) == 88);
}
static int pcnet_init (struct eth_device *dev, bd_t * bis);
static int pcnet_send (struct eth_device *dev, volatile void *packet,
int length);
static int pcnet_recv (struct eth_device *dev);
static void pcnet_halt (struct eth_device *dev);
static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_num);
#define PCI_TO_MEM(d,a) pci_phys_to_mem((pci_dev_t)d->priv, (u_long)(a))
#define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a)))
static struct pci_device_id supported[] = {
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE},
{}
};
int pcnet_initialize (bd_t * bis)
{
pci_dev_t devbusfn;
struct eth_device *dev;
u16 command, status;
int dev_nr = 0;
PCNET_DEBUG1 ("\npcnet_initialize...\n");
for (dev_nr = 0;; dev_nr++) {
/*
* Find the PCnet PCI device(s).
*/
if ((devbusfn = pci_find_devices (supported, dev_nr)) < 0) {
break;
}
/*
* Allocate and pre-fill the device structure.
*/
dev = (struct eth_device *) malloc (sizeof *dev);
dev->priv = (void *) devbusfn;
sprintf (dev->name, "pcnet#%d", dev_nr);
/*
* Setup the PCI device.
*/
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
(unsigned int *) &dev->iobase);
dev->iobase=pci_io_to_phys (devbusfn, dev->iobase);
dev->iobase &= ~0xf;
PCNET_DEBUG1 ("%s: devbusfn=0x%x iobase=0x%x: ",
dev->name, devbusfn, dev->iobase);
command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
pci_write_config_word (devbusfn, PCI_COMMAND, command);
pci_read_config_word (devbusfn, PCI_COMMAND, &status);
if ((status & command) != command) {
printf ("%s: Couldn't enable IO access or Bus Mastering\n", dev->name);
free (dev);
continue;
}
pci_write_config_byte (devbusfn, PCI_LATENCY_TIMER, 0x40);
/*
* Probe the PCnet chip.
*/
if (pcnet_probe (dev, bis, dev_nr) < 0) {
free (dev);
continue;
}
/*
* Setup device structure and register the driver.
*/
dev->init = pcnet_init;
dev->halt = pcnet_halt;
dev->send = pcnet_send;
dev->recv = pcnet_recv;
eth_register (dev);
}
udelay (10 * 1000);
return dev_nr;
}
static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
{
int chip_version;
char *chipname;
#ifdef PCNET_HAS_PROM
int i;
#endif
/* Reset the PCnet controller */
pcnet_reset (dev);
/* Check if register access is working */
if (pcnet_read_csr (dev, 0) != 4 || !pcnet_check (dev)) {
printf ("%s: CSR register access check failed\n", dev->name);
return -1;
}
/* Identify the chip */
chip_version =
pcnet_read_csr (dev, 88) | (pcnet_read_csr (dev, 89) << 16);
if ((chip_version & 0xfff) != 0x003)
return -1;
chip_version = (chip_version >> 12) & 0xffff;
switch (chip_version) {
case 0x2621:
chipname = "PCnet/PCI II 79C970A"; /* PCI */
break;
#ifdef CONFIG_PCNET_79C973
case 0x2625:
chipname = "PCnet/FAST III 79C973"; /* PCI */
break;
#endif
#ifdef CONFIG_PCNET_79C975
case 0x2627:
chipname = "PCnet/FAST III 79C975"; /* PCI */
break;
#endif
default:
printf ("%s: PCnet version %#x not supported\n",
dev->name, chip_version);
return -1;
}
PCNET_DEBUG1 ("AMD %s\n", chipname);
#ifdef PCNET_HAS_PROM
/*
* In most chips, after a chip reset, the ethernet address is read from
* the station address PROM at the base address and programmed into the
* "Physical Address Registers" CSR12-14.
*/
for (i = 0; i < 3; i++) {
unsigned int val;
val = pcnet_read_csr (dev, i + 12) & 0x0ffff;
/* There may be endianness issues here. */
dev->enetaddr[2 * i] = val & 0x0ff;
dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
}
#endif /* PCNET_HAS_PROM */
return 0;
}
static int pcnet_init (struct eth_device *dev, bd_t * bis)
{
int i, val;
u32 addr;
PCNET_DEBUG1 ("%s: pcnet_init...\n", dev->name);
/* Switch pcnet to 32bit mode */
pcnet_write_bcr (dev, 20, 2);
#ifdef CONFIG_PN62
/* Setup LED registers */
val = pcnet_read_bcr (dev, 2) | 0x1000;
pcnet_write_bcr (dev, 2, val); /* enable LEDPE */
pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */
pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */
pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */
pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */
#endif
/* Set/reset autoselect bit */
val = pcnet_read_bcr (dev, 2) & ~2;
val |= 2;
pcnet_write_bcr (dev, 2, val);
/* Enable auto negotiate, setup, disable fd */
val = pcnet_read_bcr (dev, 32) & ~0x98;
val |= 0x20;
pcnet_write_bcr (dev, 32, val);
/*
* We only maintain one structure because the drivers will never
* be used concurrently. In 32bit mode the RX and TX ring entries
* must be aligned on 16-byte boundaries.
*/
if (lp == NULL) {
addr = (u32) malloc (sizeof (pcnet_priv_t) + 0x10);
addr = (addr + 0xf) & ~0xf;
lp = (pcnet_priv_t *) addr;
}
lp->init_block.mode = cpu_to_le16 (0x0000);
lp->init_block.filter[0] = 0x00000000;
lp->init_block.filter[1] = 0x00000000;
/*
* Initialize the Rx ring.
*/
lp->cur_rx = 0;
for (i = 0; i < RX_RING_SIZE; i++) {
lp->rx_ring[i].base = PCI_TO_MEM_LE (dev, lp->rx_buf[i]);
lp->rx_ring[i].buf_length = cpu_to_le16 (-PKT_BUF_SZ);
lp->rx_ring[i].status = cpu_to_le16 (0x8000);
PCNET_DEBUG1
("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i,
lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
lp->rx_ring[i].status);
}
/*
* Initialize the Tx ring. The Tx buffer address is filled in as
* needed, but we do need to clear the upper ownership bit.
*/
lp->cur_tx = 0;
for (i = 0; i < TX_RING_SIZE; i++) {
lp->tx_ring[i].base = 0;
lp->tx_ring[i].status = 0;
}
/*
* Setup Init Block.
*/
PCNET_DEBUG1 ("Init block at 0x%p: MAC", &lp->init_block);
for (i = 0; i < 6; i++) {
lp->init_block.phys_addr[i] = dev->enetaddr[i];
PCNET_DEBUG1 (" %02x", lp->init_block.phys_addr[i]);
}
lp->init_block.tlen_rlen = cpu_to_le16 (TX_RING_LEN_BITS |
RX_RING_LEN_BITS);
lp->init_block.rx_ring = PCI_TO_MEM_LE (dev, lp->rx_ring);
lp->init_block.tx_ring = PCI_TO_MEM_LE (dev, lp->tx_ring);
PCNET_DEBUG1 ("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
lp->init_block.tlen_rlen,
lp->init_block.rx_ring, lp->init_block.tx_ring);
/*
* Tell the controller where the Init Block is located.
*/
addr = PCI_TO_MEM (dev, &lp->init_block);
pcnet_write_csr (dev, 1, addr & 0xffff);
pcnet_write_csr (dev, 2, (addr >> 16) & 0xffff);
pcnet_write_csr (dev, 4, 0x0915);
pcnet_write_csr (dev, 0, 0x0001); /* start */
/* Wait for Init Done bit */
for (i = 10000; i > 0; i--) {
if (pcnet_read_csr (dev, 0) & 0x0100)
break;
udelay (10);
}
if (i <= 0) {
printf ("%s: TIMEOUT: controller init failed\n", dev->name);
pcnet_reset (dev);
return -1;
}
/*
* Finally start network controller operation.
*/
pcnet_write_csr (dev, 0, 0x0002);
return 0;
}
static int pcnet_send (struct eth_device *dev, volatile void *packet,
int pkt_len)
{
int i, status;
struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
PCNET_DEBUG2 ("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len,
packet);
/* Wait for completion by testing the OWN bit */
for (i = 1000; i > 0; i--) {
status = le16_to_cpu (entry->status);
if ((status & 0x8000) == 0)
break;
udelay (100);
PCNET_DEBUG2 (".");
}
if (i <= 0) {
printf ("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
dev->name, lp->cur_tx, status);
pkt_len = 0;
goto failure;
}
/*
* Setup Tx ring. Caution: the write order is important here,
* set the status with the "ownership" bits last.
*/
status = 0x8300;
entry->length = le16_to_cpu (-pkt_len);
entry->misc = 0x00000000;
entry->base = PCI_TO_MEM_LE (dev, packet);
entry->status = le16_to_cpu (status);
/* Trigger an immediate send poll. */
pcnet_write_csr (dev, 0, 0x0008);
failure:
if (++lp->cur_tx >= TX_RING_SIZE)
lp->cur_tx = 0;
PCNET_DEBUG2 ("done\n");
return pkt_len;
}
static int pcnet_recv (struct eth_device *dev)
{
struct pcnet_rx_head *entry;
int pkt_len = 0;
u16 status;
while (1) {
entry = &lp->rx_ring[lp->cur_rx];
/*
* If we own the next entry, it's a new packet. Send it up.
*/
if (((status = le16_to_cpu (entry->status)) & 0x8000) != 0) {
break;
}
status >>= 8;
if (status != 0x03) { /* There was an error. */
printf ("%s: Rx%d", dev->name, lp->cur_rx);
PCNET_DEBUG1 (" (status=0x%x)", status);
if (status & 0x20)
printf (" Frame");
if (status & 0x10)
printf (" Overflow");
if (status & 0x08)
printf (" CRC");
if (status & 0x04)
printf (" Fifo");
printf (" Error\n");
entry->status &= le16_to_cpu (0x03ff);
} else {
pkt_len =
(le32_to_cpu (entry->msg_length) & 0xfff) - 4;
if (pkt_len < 60) {
printf ("%s: Rx%d: invalid packet length %d\n", dev->name, lp->cur_rx, pkt_len);
} else {
NetReceive (lp->rx_buf[lp->cur_rx], pkt_len);
PCNET_DEBUG2 ("Rx%d: %d bytes from 0x%p\n",
lp->cur_rx, pkt_len,
lp->rx_buf[lp->cur_rx]);
}
}
entry->status |= cpu_to_le16 (0x8000);
if (++lp->cur_rx >= RX_RING_SIZE)
lp->cur_rx = 0;
}
return pkt_len;
}
static void pcnet_halt (struct eth_device *dev)
{
int i;
PCNET_DEBUG1 ("%s: pcnet_halt...\n", dev->name);
/* Reset the PCnet controller */
pcnet_reset (dev);
/* Wait for Stop bit */
for (i = 1000; i > 0; i--) {
if (pcnet_read_csr (dev, 0) & 0x4)
break;
udelay (10);
}
if (i <= 0) {
printf ("%s: TIMEOUT: controller reset failed\n", dev->name);
}
}