mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
32f67bb7a1
The Libretech ALL-H3-CC has a high density connector for attaching an eMMC module. The module form factor and connection is specific to Libretech, and has provisions for split vmmc/vqmmc (core and I/O) voltage supplies, but this board does not wire the vqmmc side. The H2+/H3/H5 SoCs do not support alternate I/O voltages for eMMC either. Only 3.3V is supported. A specific module that ties vqmmc to vmmc, with both at 3.3V, must be used. Given that a) eMMC is not designed to be hotplugged, b) power is always provided on the pins, and c) MMC controllers can deal with missing cards, we can enable this by default. If a module is attached it will be picked up by the system. The device tree change was also submitted to the Linux Kernel and has already been queued up for 4.19. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
175 lines
3.3 KiB
Text
175 lines
3.3 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
pwr_led {
|
|
label = "librecomputer:green:pwr";
|
|
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
|
|
default-state = "on";
|
|
};
|
|
|
|
status_led {
|
|
label = "librecomputer:blue:status";
|
|
gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
|
|
power {
|
|
label = "power";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
|
};
|
|
};
|
|
|
|
reg_vcc1v2: vcc1v2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc1v2";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <®_vcc5v0>;
|
|
gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_vcc3v3: vcc3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <®_vcc5v0>;
|
|
};
|
|
|
|
/* This represents the board's 5V input */
|
|
reg_vcc5v0: vcc5v0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
reg_vcc_dram: vcc-dram {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-dram";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <®_vcc5v0>;
|
|
gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_vcc_io: vcc-io {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-io";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <®_vcc3v3>;
|
|
gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
|
|
};
|
|
|
|
reg_vdd_cpux: vdd-cpux {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd-cpux";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <®_vcc5v0>;
|
|
gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&emac {
|
|
phy-handle = <&int_mii_phy>;
|
|
phy-mode = "mii";
|
|
allwinner,leds-active-low;
|
|
status = "okay";
|
|
};
|
|
|
|
&ir {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ir_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
vmmc-supply = <®_vcc_io>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
|
|
cd-inverted;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_8bit_pins>;
|
|
vmmc-supply = <®_vcc_io>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
/* VBUS on USB ports are always on */
|
|
usb0_vbus-supply = <®_vcc5v0>;
|
|
usb1_vbus-supply = <®_vcc5v0>;
|
|
usb2_vbus-supply = <®_vcc5v0>;
|
|
usb3_vbus-supply = <®_vcc5v0>;
|
|
status = "okay";
|
|
};
|