u-boot/board/LaCie/edminiv2/edminiv2.c
Simon Guinot c59c085731 ARM: don't probe PHY address for LaCie boards
The command miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr) always
returns 8 for the PHY address. It is the reset value for the PHY
Address Register. Obviously, this default value could be incorrect.
Moreover, as the PHY address is well known, there is no need to
auto-detect it.

Now, the PHY address must given as a parameter to the PHY initialization
function. Additionally this patch also fixes some aesthetic issues.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
2012-07-07 14:07:33 +02:00

101 lines
3 KiB
C

/*
* Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <miiphy.h>
#include <asm/arch/orion5x.h>
#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH
* which CFI does not properly detect, hence the LEGACY config.
*/
#if defined(CONFIG_FLASH_CFI_LEGACY)
#include <flash.h>
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
{
int sectsz[] = CONFIG_SYS_FLASH_SECTSZ;
int sect;
if (base != CONFIG_SYS_FLASH_BASE)
return 0;
info->size = 0;
info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
/* set each sector's start address and size based */
for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) {
info->start[sect] = base+info->size;
info->size += sectsz[sect];
}
/* This flash must be accessed in 8-bits mode, no buffer. */
info->flash_id = 0x01000000;
info->portwidth = FLASH_CFI_8BIT;
info->chipwidth = FLASH_CFI_BY8;
info->buffer_size = 0;
/* timings are derived from the Macronix datasheet. */
info->erase_blk_tout = 1000;
info->write_tout = 10;
info->buffer_write_tout = 300;
/* Commands and addresses are for AMD mode 8-bit access. */
info->vendor = CFI_CMDSET_AMD_LEGACY;
info->cmd_reset = 0xF0;
info->interface = FLASH_CFI_X8;
info->legacy_unlock = 0;
info->ext_addr = 0;
info->addr_unlock1 = 0x00000aaa;
info->addr_unlock2 = 0x00000555;
/* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */
info->manufacturer_id = 0x22;
info->device_id = 0xBA;
info->device_id2 = 0;
info->cfi_version = 0x3133;
info->cfi_offset = 0x0000;
info->name = "MX29LV400CB";
return 1;
}
#endif /* CONFIG_SYS_FLASH_CFI */
int board_init(void)
{
/* arch number of board */
gd->bd->bi_arch_number = MACH_TYPE_EDMINI_V2;
/* boot parameter start at 256th byte of RAM base */
gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
return 0;
}
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
/* Configure and enable MV88E1116 PHY */
void reset_phy(void)
{
mv_phy_88e1116_init("egiga0", 8);
}
#endif /* CONFIG_RESET_PHY_R */