u-boot/include/configs/rk3288_common.h
Simon Glass 98632b1fa7 Remove CONFIG_SPL_PINCTRL_SUPPORT
This option is not used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:27:17 -04:00

135 lines
3.6 KiB
C

/*
* (C) Copyright 2015 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_RK3288_COMMON_H
#define __CONFIG_RK3288_COMMON_H
#include <asm/arch/hardware.h>
#define CONFIG_SYS_NO_FLASH
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
#define CONFIG_SYS_TIMER_BASE 0xff810020 /* TIMER7 */
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SPL_BOARD_INIT
#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
/* Bootrom will load u-boot binary to 0x0 once return from SPL */
#define CONFIG_SYS_TEXT_BASE 0x00000000
#else
#define CONFIG_SYS_TEXT_BASE 0x00100000
#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x00100000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff718000
#define CONFIG_SPL_TEXT_BASE 0xff704004
#define CONFIG_SILENT_CONSOLE
#ifndef CONFIG_SPL_BUILD
# define CONFIG_SYS_CONSOLE_IS_IN_ENV
# define CONFIG_CONSOLE_MUX
#endif
/* MMC/SD IP block */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_DWMMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FAT_WRITE
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_SDRAM_BASE 0
#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_BANK_SIZE (2UL << 30)
#define CONFIG_SPI_FLASH
#define CONFIG_SPI
#define CONFIG_SF_DEFAULT_SPEED 20000000
#ifndef CONFIG_SPL_BUILD
/* usb otg */
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_DWC2_OTG
#define CONFIG_ROCKCHIP_USB2_PHY
#define CONFIG_USB_GADGET_VBUS_DRAW 0
/* fastboot */
#define CONFIG_CMD_FASTBOOT
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_FASTBOOT_FLASH
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 /* eMMC */
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE 0x08000000
/* usb mass storage */
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_G_DNL_MANUFACTURER "Rockchip"
#define CONFIG_G_DNL_VENDOR_NUM 0x2207
#define CONFIG_G_DNL_PRODUCT_NUM 0x320a
/* Enable gpt partition table */
#define CONFIG_CMD_GPT
#include <config_distro_defaults.h>
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x00000000\0" \
"pxefile_addr_r=0x00100000\0" \
"fdt_addr_r=0x01f00000\0" \
"kernel_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x04000000\0"
#define CONFIG_RANDOM_UUID
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name=boot,start=8M,size=64M,bootable,uuid=${uuid_gpt_boot};" \
"name=rootfs,size=-,uuid=${uuid_gpt_rootfs};\0" \
/* First try to boot from SD (index 0), then eMMC (index 1 */
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1)
#include <config_distro_bootcmd.h>
/* Linux fails to load the fdt if it's loaded above 512M on a Rock 2 board, so
* limit the fdt reallocation to that */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x1fffffff\0" \
"initrd_high=0x1fffffff\0" \
"partitions=" PARTS_DEFAULT \
ENV_MEM_LAYOUT_SETTINGS \
ROCKCHIP_DEVICE_SETTINGS \
BOOTENV
#endif
#endif