mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
d1611086e0
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - SPL not supported yet --> no spl-dir in arch/arm/cpu/armv7/s5p4418/. Appropriate line in Makefile removed. - cpu.c: '#include <cpu_func.h>' added. - arch/arm/cpu/armv7/s5p4418/u-boot.lds removed, is not required anylonger. - "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used instead of drivers/pwm/pwm-nexell.c. - s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"' removed, is not necessary, error at out-of-tree building. '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of added DM_VIDEO support. - board/s5p4418/ renamed to board/friendlyarm/ - All s5p4418-boards except nanopi2 removed because there is no possibility to test the other boards. - Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi), e.g. "config ..." entries moved from/to other Kconfig. - "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - nanopi2/board.c: All getenv(), getenv_ulong(), setenv() and saveenv() renamed to env_get(), env_get_ulong(), env_set() and env_save(), respectively. MACH_TYPE_S5P4418 is not defined anymore, therefore appropriate code removed (not necessary for DT-kernels). - nanopi2/onewire.c: All crc8() renamed to crc8_ow() because crc8() is already defined in lib/crc8.c (with different parameters). - dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the appropriate functionality is not supported yet. New mmc-property "mmcboost" added. s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries added. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
46 lines
1.2 KiB
Makefile
46 lines
1.2 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# (C) Copyright 2000-2003
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
extra-y := start.o
|
|
|
|
obj-y += cache_v7.o cache_v7_asm.o
|
|
|
|
obj-y += cpu.o cp15.o
|
|
obj-y += syslib.o
|
|
|
|
obj-$(CONFIG_SYS_ARM_MPU) += mpu_v7r.o
|
|
|
|
ifneq ($(CONFIG_SPL_BUILD),y)
|
|
obj-$(CONFIG_EFI_LOADER) += sctlr.o
|
|
obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o
|
|
endif
|
|
|
|
ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
|
|
obj-y += lowlevel_init.o
|
|
endif
|
|
|
|
obj-$(CONFIG_ARM_SMCCC) += smccc-call.o
|
|
obj-$(CONFIG_ARMV7_NONSEC) += nonsec_virt.o virt-v7.o virt-dt.o
|
|
obj-$(CONFIG_ARMV7_PSCI) += psci.o psci-common.o
|
|
|
|
obj-$(CONFIG_IPROC) += iproc-common/
|
|
obj-$(CONFIG_KONA) += kona-common/
|
|
obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o
|
|
|
|
ifneq (,$(filter s5pc1xx exynos,$(SOC)))
|
|
obj-y += s5p-common/
|
|
endif
|
|
|
|
obj-$(if $(filter bcm235xx,$(SOC)),y) += bcm235xx/
|
|
obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
|
|
obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
|
|
obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
|
|
obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/
|
|
obj-$(CONFIG_RMOBILE) += rmobile/
|
|
obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
|
|
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
|
|
obj-$(CONFIG_VF610) += vf610/
|
|
obj-$(CONFIG_ARCH_S5P4418) += s5p4418/
|
|
obj-$(CONFIG_ARCH_NEXELL) += s5p-common/
|