Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 07:34:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/i2c/zynq_i2c.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

313 lines
8.9 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for the Zynq-7000 PS I2C controller
* IP from Cadence (ID T-CS-PE-0007-100, Version R1p10f2)
*
* Author: Joe Hershberger <joe.hershberger@ni.com>
* Copyright (c) 2012 Joe Hershberger.
*
* Copyright (c) 2012-2013 Xilinx, Michal Simek
*
* NOTE: This driver should be converted to driver model before June 2017.
* Please see doc/driver-model/i2c-howto.txt for instructions.
*/
#include <common.h>
#include <asm/io.h>
#include <i2c.h>
#include <linux/errno.h>
#include <asm/arch/hardware.h>
/* i2c register set */
struct zynq_i2c_registers {
u32 control;
u32 status;
u32 address;
u32 data;
u32 interrupt_status;
u32 transfer_size;
u32 slave_mon_pause;
u32 time_out;
u32 interrupt_mask;
u32 interrupt_enable;
u32 interrupt_disable;
};
/* Control register fields */
#define ZYNQ_I2C_CONTROL_RW 0x00000001
#define ZYNQ_I2C_CONTROL_MS 0x00000002
#define ZYNQ_I2C_CONTROL_NEA 0x00000004
#define ZYNQ_I2C_CONTROL_ACKEN 0x00000008
#define ZYNQ_I2C_CONTROL_HOLD 0x00000010
#define ZYNQ_I2C_CONTROL_SLVMON 0x00000020
#define ZYNQ_I2C_CONTROL_CLR_FIFO 0x00000040
#define ZYNQ_I2C_CONTROL_DIV_B_SHIFT 8
#define ZYNQ_I2C_CONTROL_DIV_B_MASK 0x00003F00
#define ZYNQ_I2C_CONTROL_DIV_A_SHIFT 14
#define ZYNQ_I2C_CONTROL_DIV_A_MASK 0x0000C000
/* Status register values */
#define ZYNQ_I2C_STATUS_RXDV 0x00000020
#define ZYNQ_I2C_STATUS_TXDV 0x00000040
#define ZYNQ_I2C_STATUS_RXOVF 0x00000080
#define ZYNQ_I2C_STATUS_BA 0x00000100
/* Interrupt register fields */
#define ZYNQ_I2C_INTERRUPT_COMP 0x00000001
#define ZYNQ_I2C_INTERRUPT_DATA 0x00000002
#define ZYNQ_I2C_INTERRUPT_NACK 0x00000004
#define ZYNQ_I2C_INTERRUPT_TO 0x00000008
#define ZYNQ_I2C_INTERRUPT_SLVRDY 0x00000010
#define ZYNQ_I2C_INTERRUPT_RXOVF 0x00000020
#define ZYNQ_I2C_INTERRUPT_TXOVF 0x00000040
#define ZYNQ_I2C_INTERRUPT_RXUNF 0x00000080
#define ZYNQ_I2C_INTERRUPT_ARBLOST 0x00000200
#define ZYNQ_I2C_FIFO_DEPTH 16
#define ZYNQ_I2C_TRANSFERT_SIZE_MAX 255 /* Controller transfer limit */
static struct zynq_i2c_registers *i2c_select(struct i2c_adapter *adap)
{
return adap->hwadapnr ?
/* Zynq PS I2C1 */
(struct zynq_i2c_registers *)ZYNQ_I2C_BASEADDR1 :
/* Zynq PS I2C0 */
(struct zynq_i2c_registers *)ZYNQ_I2C_BASEADDR0;
}
/* I2C init called by cmd_i2c when doing 'i2c reset'. */
static void zynq_i2c_init(struct i2c_adapter *adap, int requested_speed,
int slaveadd)
{
struct zynq_i2c_registers *zynq_i2c = i2c_select(adap);
/* 111MHz / ( (3 * 17) * 22 ) = ~100KHz */
writel((16 << ZYNQ_I2C_CONTROL_DIV_B_SHIFT) |
(2 << ZYNQ_I2C_CONTROL_DIV_A_SHIFT), &zynq_i2c->control);
/* Enable master mode, ack, and 7-bit addressing */
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_MS |
ZYNQ_I2C_CONTROL_ACKEN | ZYNQ_I2C_CONTROL_NEA);
}
#ifdef DEBUG
static void zynq_i2c_debug_status(struct zynq_i2c_registers *zynq_i2c)
{
int int_status;
int status;
int_status = readl(&zynq_i2c->interrupt_status);
status = readl(&zynq_i2c->status);
if (int_status || status) {
debug("Status: ");
if (int_status & ZYNQ_I2C_INTERRUPT_COMP)
debug("COMP ");
if (int_status & ZYNQ_I2C_INTERRUPT_DATA)
debug("DATA ");
if (int_status & ZYNQ_I2C_INTERRUPT_NACK)
debug("NACK ");
if (int_status & ZYNQ_I2C_INTERRUPT_TO)
debug("TO ");
if (int_status & ZYNQ_I2C_INTERRUPT_SLVRDY)
debug("SLVRDY ");
if (int_status & ZYNQ_I2C_INTERRUPT_RXOVF)
debug("RXOVF ");
if (int_status & ZYNQ_I2C_INTERRUPT_TXOVF)
debug("TXOVF ");
if (int_status & ZYNQ_I2C_INTERRUPT_RXUNF)
debug("RXUNF ");
if (int_status & ZYNQ_I2C_INTERRUPT_ARBLOST)
debug("ARBLOST ");
if (status & ZYNQ_I2C_STATUS_RXDV)
debug("RXDV ");
if (status & ZYNQ_I2C_STATUS_TXDV)
debug("TXDV ");
if (status & ZYNQ_I2C_STATUS_RXOVF)
debug("RXOVF ");
if (status & ZYNQ_I2C_STATUS_BA)
debug("BA ");
debug("TS%d ", readl(&zynq_i2c->transfer_size));
debug("\n");
}
}
#endif
/* Wait for an interrupt */
static u32 zynq_i2c_wait(struct zynq_i2c_registers *zynq_i2c, u32 mask)
{
int timeout, int_status;
for (timeout = 0; timeout < 100; timeout++) {
udelay(100);
int_status = readl(&zynq_i2c->interrupt_status);
if (int_status & mask)
break;
}
#ifdef DEBUG
zynq_i2c_debug_status(zynq_i2c);
#endif
/* Clear interrupt status flags */
writel(int_status & mask, &zynq_i2c->interrupt_status);
return int_status & mask;
}
/*
* I2C probe called by cmd_i2c when doing 'i2c probe'.
* Begin read, nak data byte, end.
*/
static int zynq_i2c_probe(struct i2c_adapter *adap, u8 dev)
{
struct zynq_i2c_registers *zynq_i2c = i2c_select(adap);
/* Attempt to read a byte */
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
ZYNQ_I2C_CONTROL_RW);
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
writel(0xFF, &zynq_i2c->interrupt_status);
writel(dev, &zynq_i2c->address);
writel(1, &zynq_i2c->transfer_size);
return (zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP |
ZYNQ_I2C_INTERRUPT_NACK) &
ZYNQ_I2C_INTERRUPT_COMP) ? 0 : -ETIMEDOUT;
}
/*
* I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c
* Begin write, send address byte(s), begin read, receive data bytes, end.
*/
static int zynq_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
int alen, u8 *data, int length)
{
u32 status;
u32 i = 0;
u8 *cur_data = data;
struct zynq_i2c_registers *zynq_i2c = i2c_select(adap);
/* Check the hardware can handle the requested bytes */
if ((length < 0) || (length > ZYNQ_I2C_TRANSFERT_SIZE_MAX))
return -EINVAL;
/* Write the register address */
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
ZYNQ_I2C_CONTROL_HOLD);
/*
* Temporarily disable restart (by clearing hold)
* It doesn't seem to work.
*/
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
writel(0xFF, &zynq_i2c->interrupt_status);
if (alen) {
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW);
writel(dev, &zynq_i2c->address);
while (alen--)
writel(addr >> (8 * alen), &zynq_i2c->data);
/* Wait for the address to be sent */
if (!zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP)) {
/* Release the bus */
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
return -ETIMEDOUT;
}
debug("Device acked address\n");
}
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
ZYNQ_I2C_CONTROL_RW);
/* Start reading data */
writel(dev, &zynq_i2c->address);
writel(length, &zynq_i2c->transfer_size);
/* Wait for data */
do {
status = zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP |
ZYNQ_I2C_INTERRUPT_DATA);
if (!status) {
/* Release the bus */
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
return -ETIMEDOUT;
}
debug("Read %d bytes\n",
length - readl(&zynq_i2c->transfer_size));
for (; i < length - readl(&zynq_i2c->transfer_size); i++)
*(cur_data++) = readl(&zynq_i2c->data);
} while (readl(&zynq_i2c->transfer_size) != 0);
/* All done... release the bus */
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
#ifdef DEBUG
zynq_i2c_debug_status(zynq_i2c);
#endif
return 0;
}
/*
* I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c
* Begin write, send address byte(s), send data bytes, end.
*/
static int zynq_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
int alen, u8 *data, int length)
{
u8 *cur_data = data;
struct zynq_i2c_registers *zynq_i2c = i2c_select(adap);
/* Write the register address */
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
ZYNQ_I2C_CONTROL_HOLD);
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW);
writel(0xFF, &zynq_i2c->interrupt_status);
writel(dev, &zynq_i2c->address);
if (alen) {
while (alen--)
writel(addr >> (8 * alen), &zynq_i2c->data);
/* Start the tranfer */
if (!zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP)) {
/* Release the bus */
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
return -ETIMEDOUT;
}
debug("Device acked address\n");
}
while (length--) {
writel(*(cur_data++), &zynq_i2c->data);
if (readl(&zynq_i2c->transfer_size) == ZYNQ_I2C_FIFO_DEPTH) {
if (!zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP)) {
/* Release the bus */
clrbits_le32(&zynq_i2c->control,
ZYNQ_I2C_CONTROL_HOLD);
return -ETIMEDOUT;
}
}
}
/* All done... release the bus */
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
/* Wait for the address and data to be sent */
if (!zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP))
return -ETIMEDOUT;
return 0;
}
static unsigned int zynq_i2c_set_bus_speed(struct i2c_adapter *adap,
unsigned int speed)
{
if (speed != 1000000)
return -EINVAL;
return 0;
}
#ifdef CONFIG_ZYNQ_I2C0
U_BOOT_I2C_ADAP_COMPLETE(zynq_0, zynq_i2c_init, zynq_i2c_probe, zynq_i2c_read,
zynq_i2c_write, zynq_i2c_set_bus_speed,
CONFIG_SYS_I2C_ZYNQ_SPEED, CONFIG_SYS_I2C_ZYNQ_SLAVE,
0)
#endif
#ifdef CONFIG_ZYNQ_I2C1
U_BOOT_I2C_ADAP_COMPLETE(zynq_1, zynq_i2c_init, zynq_i2c_probe, zynq_i2c_read,
zynq_i2c_write, zynq_i2c_set_bus_speed,
CONFIG_SYS_I2C_ZYNQ_SPEED, CONFIG_SYS_I2C_ZYNQ_SLAVE,
1)
#endif
Reference in a new issue View git blame Copy permalink