mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
c21f58548c
For LD11 and LD20 SoCs, the RST_n pin is asserted by default. If the EXT_CSD[162], bit[1:0] (RST_n_ENABLE) is fused, the eMMC device would stay in the reset state until its RST_n pin is deasserted by software. Currently, this is cared by an ad-hoc way because the eMMC hardware reset provider is not supported in U-Boot for now. This code should be re-written once the "mmc-pwrseq-emmc" binding is supported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
45 lines
960 B
C
45 lines
960 B
C
/*
|
|
* Copyright (C) 2016 Socionext Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <spl.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
|
|
#include "../init.h"
|
|
#include "../sc64-regs.h"
|
|
#include "../sg-regs.h"
|
|
|
|
#define SDCTRL_EMMC_HW_RESET 0x59810280
|
|
|
|
void uniphier_ld11_clk_init(void)
|
|
{
|
|
/* if booted from a device other than USB, without stand-by MPU */
|
|
if ((readl(SG_PINMON0) & BIT(27)) &&
|
|
uniphier_boot_device_raw() != BOOT_DEVICE_USB) {
|
|
writel(1, SG_ETPHYPSHUT);
|
|
writel(1, SG_ETPHYCNT);
|
|
|
|
udelay(1); /* wait for regulator level 1.1V -> 2.5V */
|
|
|
|
writel(3, SG_ETPHYCNT);
|
|
writel(3, SG_ETPHYPSHUT);
|
|
writel(7, SG_ETPHYCNT);
|
|
}
|
|
|
|
/* TODO: use "mmc-pwrseq-emmc" */
|
|
writel(1, SDCTRL_EMMC_HW_RESET);
|
|
|
|
#ifdef CONFIG_USB_EHCI
|
|
{
|
|
/* FIXME: the current clk driver can not handle parents */
|
|
u32 tmp;
|
|
tmp = readl(SC_CLKCTRL4);
|
|
tmp |= SC_CLKCTRL4_MIO | SC_CLKCTRL4_STDMAC;
|
|
writel(tmp, SC_CLKCTRL4);
|
|
}
|
|
#endif
|
|
}
|