mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 17:10:11 +00:00
a077ac13d0
It is not a parse error to have a default value of "0" for a "hex" type entry, instead of "0x0". However, "0" and "0x0" are not treated the same even by the tools themselves. Correct this by changing the default value from "0" to "0x0" for all hex type questions that had the incorrect default. Fix one instance (in two configs) of a default of "0" being used on a hex question to be "0x0". Remove the cases where a defconfig had set a value of "0x0" to be used as the default had been "0". Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
123 lines
3.1 KiB
Text
123 lines
3.1 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_MX6=y
|
|
CONFIG_TEXT_BASE=0x17800000
|
|
CONFIG_SYS_MALLOC_LEN=0xa00000
|
|
CONFIG_SPL_GPIO=y
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_ENV_SIZE=0x100000
|
|
CONFIG_ENV_OFFSET=0x400000
|
|
CONFIG_MX6Q=y
|
|
CONFIG_MX6_OCRAM_256KB=y
|
|
CONFIG_TARGET_MX6LOGICPD=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd"
|
|
CONFIG_SPL_TEXT_BASE=0x00908000
|
|
CONFIG_SYS_PROMPT="i.MX6 Logic # "
|
|
CONFIG_SYS_MONITOR_LEN=409600
|
|
CONFIG_SPL_MMC=y
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL=y
|
|
CONFIG_SPL_FS_FAT=y
|
|
CONFIG_SPL_PAYLOAD="u-boot.img"
|
|
CONFIG_SYS_MEMTEST_START=0x10000000
|
|
CONFIG_SYS_MEMTEST_END=0x10010000
|
|
CONFIG_LTO=y
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_BOOTCOMMAND="run autoboot"
|
|
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
|
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
|
|
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
|
|
CONFIG_SYS_SPL_MALLOC=y
|
|
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
|
|
CONFIG_SPL_DMA=y
|
|
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
|
|
CONFIG_SPL_I2C=y
|
|
CONFIG_SPL_NAND_SUPPORT=y
|
|
CONFIG_SPL_OS_BOOT=y
|
|
CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
|
|
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x500000
|
|
CONFIG_SPL_FALCON_BOOT_MMCSD=y
|
|
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
|
|
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800
|
|
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x800
|
|
CONFIG_SPL_WATCHDOG=y
|
|
CONFIG_SYS_MAXARGS=32
|
|
CONFIG_SYS_PBSIZE=543
|
|
CONFIG_CMD_SPL=y
|
|
CONFIG_CMD_SPL_NAND_OFS=0x1500000
|
|
CONFIG_CMD_SPL_WRITE_SIZE=0x00100000
|
|
CONFIG_CMD_MEMTEST=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_CMD_NAND_TRIMFFS=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_SDP=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
CONFIG_CMD_CACHE=y
|
|
# CONFIG_CMD_LED is not set
|
|
CONFIG_CMD_UUID=y
|
|
CONFIG_CMD_PMIC=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),16m(kernel),1m(dtb),-(fs)"
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_FAT=y
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
|
CONFIG_USE_ETHPRIME=y
|
|
CONFIG_ETHPRIME="FEC"
|
|
CONFIG_ARP_TIMEOUT=200
|
|
CONFIG_SPL_DM=y
|
|
CONFIG_SPL_DM_SEQ_ALIAS=y
|
|
CONFIG_SPL_OF_TRANSLATE=y
|
|
CONFIG_BOUNCE_BUFFER=y
|
|
CONFIG_PCF8575_GPIO=y
|
|
CONFIG_LED=y
|
|
CONFIG_LED_GPIO=y
|
|
CONFIG_MISC=y
|
|
CONFIG_I2C_EEPROM=y
|
|
CONFIG_FSL_USDHC=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_SYS_NAND_USE_FLASH_BBT=y
|
|
CONFIG_NAND_MXS=y
|
|
CONFIG_NAND_MXS_DT=y
|
|
CONFIG_SYS_NAND_ONFI_DETECTION=y
|
|
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
|
CONFIG_SYS_NAND_U_BOOT_OFFS=0x200000
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_ATHEROS=y
|
|
CONFIG_FEC_MXC=y
|
|
CONFIG_MII=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_SPL_PINCTRL=y
|
|
CONFIG_PINCTRL_IMX6=y
|
|
CONFIG_DM_PMIC_PFUZE100=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_PFUZE100=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_MXC_UART=y
|
|
CONFIG_USB=y
|
|
# CONFIG_SPL_DM_USB is not set
|
|
CONFIG_SPL_USB_HOST=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_SPL_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="FSL"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
|
|
CONFIG_CI_UDC=y
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_SPL_USB_SDP_SUPPORT=y
|