u-boot/drivers/pci/pcie_layerscape_fixup.c
Marek Behún 2105cd0421 fdt_support: Remove FDT_STATUS_FAIL_ERROR_CODE
Since no one uses this feature and I am not aware of any parsers of this
in Linux, remove it.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-19 09:50:47 +01:00

635 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017-2021 NXP
* Copyright 2014-2015 Freescale Semiconductor, Inc.
* Layerscape PCIe driver
*/
#include <common.h>
#include <dm.h>
#include <init.h>
#include <log.h>
#include <pci.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/io.h>
#include <errno.h>
#ifdef CONFIG_OF_BOARD_SETUP
#include <linux/libfdt.h>
#include <fdt_support.h>
#ifdef CONFIG_ARM
#include <asm/arch/clock.h>
#endif
#include <malloc.h>
#include <env.h>
#include "pcie_layerscape.h"
#include "pcie_layerscape_fixup_common.h"
int next_stream_id;
static int fdt_pcie_get_nodeoffset(void *blob, struct ls_pcie_rc *pcie_rc)
{
int nodeoffset;
uint svr;
char *compat = NULL;
/* find pci controller node */
nodeoffset = fdt_node_offset_by_compat_reg(blob, "fsl,ls-pcie",
pcie_rc->dbi_res.start);
if (nodeoffset < 0) {
#ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */
svr = (get_svr() >> SVR_VAR_PER_SHIFT) & 0xFFFFFE;
if (svr == SVR_LS2088A || svr == SVR_LS2084A ||
svr == SVR_LS2048A || svr == SVR_LS2044A ||
svr == SVR_LS2081A || svr == SVR_LS2041A)
compat = "fsl,ls2088a-pcie";
else
compat = CONFIG_FSL_PCIE_COMPAT;
nodeoffset =
fdt_node_offset_by_compat_reg(blob, compat,
pcie_rc->dbi_res.start);
#endif
}
return nodeoffset;
}
#if defined(CONFIG_FSL_LSCH3) || defined(CONFIG_FSL_LSCH2)
/*
* Return next available LUT index.
*/
static int ls_pcie_next_lut_index(struct ls_pcie_rc *pcie_rc)
{
if (pcie_rc->next_lut_index < PCIE_LUT_ENTRY_COUNT)
return pcie_rc->next_lut_index++;
else
return -ENOSPC; /* LUT is full */
}
static void lut_writel(struct ls_pcie_rc *pcie_rc, unsigned int value,
unsigned int offset)
{
struct ls_pcie *pcie = pcie_rc->pcie;
if (pcie->big_endian)
out_be32(pcie->lut + offset, value);
else
out_le32(pcie->lut + offset, value);
}
/*
* Program a single LUT entry
*/
static void ls_pcie_lut_set_mapping(struct ls_pcie_rc *pcie_rc, int index,
u32 devid, u32 streamid)
{
/* leave mask as all zeroes, want to match all bits */
lut_writel(pcie_rc, devid << 16, PCIE_LUT_UDR(index));
lut_writel(pcie_rc, streamid | PCIE_LUT_ENABLE, PCIE_LUT_LDR(index));
}
/*
* An msi-map is a property to be added to the pci controller
* node. It is a table, where each entry consists of 4 fields
* e.g.:
*
* msi-map = <[devid] [phandle-to-msi-ctrl] [stream-id] [count]
* [devid] [phandle-to-msi-ctrl] [stream-id] [count]>;
*/
static void fdt_pcie_set_msi_map_entry_ls(void *blob,
struct ls_pcie_rc *pcie_rc,
u32 devid, u32 streamid)
{
u32 *prop;
u32 phandle;
int nodeoffset;
uint svr;
char *compat = NULL;
struct ls_pcie *pcie = pcie_rc->pcie;
/* find pci controller node */
nodeoffset = fdt_node_offset_by_compat_reg(blob, "fsl,ls-pcie",
pcie_rc->dbi_res.start);
if (nodeoffset < 0) {
#ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of dts node */
svr = (get_svr() >> SVR_VAR_PER_SHIFT) & 0xFFFFFE;
if (svr == SVR_LS2088A || svr == SVR_LS2084A ||
svr == SVR_LS2048A || svr == SVR_LS2044A ||
svr == SVR_LS2081A || svr == SVR_LS2041A)
compat = "fsl,ls2088a-pcie";
else
compat = CONFIG_FSL_PCIE_COMPAT;
if (compat)
nodeoffset = fdt_node_offset_by_compat_reg(blob,
compat, pcie_rc->dbi_res.start);
#endif
if (nodeoffset < 0)
return;
}
/* get phandle to MSI controller */
prop = (u32 *)fdt_getprop(blob, nodeoffset, "msi-parent", 0);
if (prop == NULL) {
debug("\n%s: ERROR: missing msi-parent: PCIe%d\n",
__func__, pcie->idx);
return;
}
phandle = fdt32_to_cpu(*prop);
/* set one msi-map row */
fdt_appendprop_u32(blob, nodeoffset, "msi-map", devid);
fdt_appendprop_u32(blob, nodeoffset, "msi-map", phandle);
fdt_appendprop_u32(blob, nodeoffset, "msi-map", streamid);
fdt_appendprop_u32(blob, nodeoffset, "msi-map", 1);
}
/*
* An iommu-map is a property to be added to the pci controller
* node. It is a table, where each entry consists of 4 fields
* e.g.:
*
* iommu-map = <[devid] [phandle-to-iommu-ctrl] [stream-id] [count]
* [devid] [phandle-to-iommu-ctrl] [stream-id] [count]>;
*/
static void fdt_pcie_set_iommu_map_entry_ls(void *blob,
struct ls_pcie_rc *pcie_rc,
u32 devid, u32 streamid)
{
u32 *prop;
u32 iommu_map[4];
int nodeoffset;
int lenp;
struct ls_pcie *pcie = pcie_rc->pcie;
nodeoffset = fdt_pcie_get_nodeoffset(blob, pcie_rc);
if (nodeoffset < 0)
return;
/* get phandle to iommu controller */
prop = fdt_getprop_w(blob, nodeoffset, "iommu-map", &lenp);
if (prop == NULL) {
debug("\n%s: ERROR: missing iommu-map: PCIe%d\n",
__func__, pcie->idx);
return;
}
/* set iommu-map row */
iommu_map[0] = cpu_to_fdt32(devid);
iommu_map[1] = *++prop;
iommu_map[2] = cpu_to_fdt32(streamid);
iommu_map[3] = cpu_to_fdt32(1);
if (devid == 0) {
fdt_setprop_inplace(blob, nodeoffset, "iommu-map",
iommu_map, 16);
} else {
fdt_appendprop(blob, nodeoffset, "iommu-map", iommu_map, 16);
}
}
static int fdt_fixup_pcie_device_ls(void *blob, pci_dev_t bdf,
struct ls_pcie_rc *pcie_rc)
{
int streamid, index;
streamid = pcie_next_streamid(pcie_rc->stream_id_cur,
pcie_rc->pcie->idx);
if (streamid < 0) {
printf("ERROR: out of stream ids for BDF %d.%d.%d\n",
PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
return -ENOENT;
}
pcie_rc->stream_id_cur++;
index = ls_pcie_next_lut_index(pcie_rc);
if (index < 0) {
printf("ERROR: out of LUT indexes for BDF %d.%d.%d\n",
PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
return -ENOENT;
}
/* map PCI b.d.f to streamID in LUT */
ls_pcie_lut_set_mapping(pcie_rc, index, bdf >> 8, streamid);
/* update msi-map in device tree */
fdt_pcie_set_msi_map_entry_ls(blob, pcie_rc, bdf >> 8, streamid);
/* update iommu-map in device tree */
fdt_pcie_set_iommu_map_entry_ls(blob, pcie_rc, bdf >> 8, streamid);
return 0;
}
struct extra_iommu_entry {
int action;
pci_dev_t bdf;
int num_vfs;
bool noari;
};
#define EXTRA_IOMMU_ENTRY_HOTPLUG 1
#define EXTRA_IOMMU_ENTRY_VFS 2
static struct extra_iommu_entry *get_extra_iommu_ents(void *blob,
int nodeoffset,
phys_addr_t addr,
int *cnt)
{
const char *s, *p, *tok;
struct extra_iommu_entry *entries;
int i = 0, b, d, f;
/*
* Retrieve extra IOMMU configuration from env var or from device tree.
* Env var is given priority.
*/
s = env_get("pci_iommu_extra");
if (!s) {
s = fdt_getprop(blob, nodeoffset, "pci-iommu-extra", NULL);
} else {
phys_addr_t pci_base;
char *endp;
/*
* In env var case the config string has "pci@0x..." in
* addition. Parse this part and match it by address against
* the input pci controller's registers base address.
*/
tok = s;
p = strchrnul(s + 1, ',');
s = NULL;
do {
if (!strncmp(tok, "pci", 3)) {
pci_base = simple_strtoul(tok + 4, &endp, 0);
if (pci_base == addr) {
s = endp + 1;
break;
}
}
p = strchrnul(p + 1, ',');
tok = p + 1;
} while (*p);
}
/*
* If no env var or device tree property found or pci register base
* address mismatches, bail out
*/
if (!s)
return NULL;
/*
* In order to find how many action entries to allocate, count number
* of actions by interating through the pairs of bdfs and actions.
*/
*cnt = 0;
p = s;
while (*p && strncmp(p, "pci", 3)) {
if (*p == ',')
(*cnt)++;
p++;
}
if (!(*p))
(*cnt)++;
if (!(*cnt) || (*cnt) % 2) {
printf("ERROR: invalid or odd extra iommu token count %d\n",
*cnt);
return NULL;
}
*cnt = (*cnt) / 2;
entries = malloc((*cnt) * sizeof(*entries));
if (!entries) {
printf("ERROR: fail to allocate extra iommu entries\n");
return NULL;
}
/*
* Parse action entries one by one and store the information in the
* newly allocated actions array.
*/
p = s;
while (p) {
/* Extract BDF */
b = simple_strtoul(p, (char **)&p, 0); p++;
d = simple_strtoul(p, (char **)&p, 0); p++;
f = simple_strtoul(p, (char **)&p, 0); p++;
entries[i].bdf = PCI_BDF(b, d, f);
/* Parse action */
if (!strncmp(p, "hp", 2)) {
/* Hot-plug entry */
entries[i].action = EXTRA_IOMMU_ENTRY_HOTPLUG;
p += 2;
} else if (!strncmp(p, "vfs", 3) ||
!strncmp(p, "noari_vfs", 9)) {
/* VFs or VFs with ARI disabled entry */
entries[i].action = EXTRA_IOMMU_ENTRY_VFS;
entries[i].noari = !strncmp(p, "noari_vfs", 9);
/*
* Parse and store total number of VFs to allocate
* IOMMU entries for.
*/
p = strchr(p, '=');
entries[i].num_vfs = simple_strtoul(p + 1, (char **)&p,
0);
if (*p)
p++;
} else {
printf("ERROR: invalid action in extra iommu entry\n");
free(entries);
return NULL;
}
if (!(*p) || !strncmp(p, "pci", 3))
break;
i++;
}
return entries;
}
static void get_vf_offset_and_stride(struct udevice *dev, int sriov_pos,
struct extra_iommu_entry *entry,
u16 *offset, u16 *stride)
{
u16 tmp16;
u32 tmp32;
bool have_ari = false;
int pos;
struct udevice *pf_dev;
dm_pci_read_config16(dev, sriov_pos + PCI_SRIOV_TOTAL_VF, &tmp16);
if (entry->num_vfs > tmp16) {
printf("WARN: requested no. of VFs %d exceeds total of %d\n",
entry->num_vfs, tmp16);
}
/*
* The code below implements the VF Discovery recomandations specified
* in PCIe base spec "9.2.1.2 VF Discovery", quoted below:
*
* VF Discovery
*
* The First VF Offset and VF Stride fields in the SR-IOV extended
* capability are 16-bit Routing ID offsets. These offsets are used to
* compute the Routing IDs for the VFs with the following restrictions:
* - The value in NumVFs in a PF (Section 9.3.3.7) may affect the
* values in First VF Offset (Section 9.3.3.9) and VF Stride
* (Section 9.3.3.10) of that PF.
* - The value in ARI Capable Hierarchy (Section 9.3.3.3.5) in the
* lowest-numbered PF of the Device (for example PF0) may affect
* the values in First VF Offset and VF Stride in all PFs of the
* Device.
* - NumVFs of a PF may only be changed when VF Enable
* (Section 9.3.3.3.1) of that PF is Clear.
* - ARI Capable Hierarchy (Section 9.3.3.3.5) may only be changed
* when VF Enable is Clear in all PFs of a Device.
*/
/* Clear VF enable for all PFs */
device_foreach_child(pf_dev, dev->parent) {
dm_pci_read_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL,
&tmp16);
tmp16 &= ~PCI_SRIOV_CTRL_VFE;
dm_pci_write_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL,
tmp16);
}
/* Obtain a reference to PF0 device */
if (dm_pci_bus_find_bdf(PCI_BDF(PCI_BUS(entry->bdf),
PCI_DEV(entry->bdf), 0), &pf_dev)) {
printf("WARN: failed to get PF0\n");
}
if (entry->noari)
goto skip_ari;
/* Check that connected downstream port supports ARI Forwarding */
pos = dm_pci_find_capability(dev->parent, PCI_CAP_ID_EXP);
dm_pci_read_config32(dev->parent, pos + PCI_EXP_DEVCAP2, &tmp32);
if (!(tmp32 & PCI_EXP_DEVCAP2_ARI))
goto skip_ari;
/* Check that PF supports Alternate Routing ID */
if (!dm_pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI))
goto skip_ari;
/* Set ARI Capable Hierarcy for PF0 */
dm_pci_read_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, &tmp16);
tmp16 |= PCI_SRIOV_CTRL_ARI;
dm_pci_write_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL, tmp16);
have_ari = true;
skip_ari:
if (!have_ari) {
/*
* No ARI support or disabled so clear ARI Capable Hierarcy
* for PF0
*/
dm_pci_read_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL,
&tmp16);
tmp16 &= ~PCI_SRIOV_CTRL_ARI;
dm_pci_write_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL,
tmp16);
}
/* Set requested number of VFs */
dm_pci_write_config16(dev, sriov_pos + PCI_SRIOV_NUM_VF,
entry->num_vfs);
/* Read VF stride and offset with the configs just made */
dm_pci_read_config16(dev, sriov_pos + PCI_SRIOV_VF_OFFSET, offset);
dm_pci_read_config16(dev, sriov_pos + PCI_SRIOV_VF_STRIDE, stride);
if (have_ari) {
/* Reset to default ARI Capable Hierarcy bit for PF0 */
dm_pci_read_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL,
&tmp16);
tmp16 &= ~PCI_SRIOV_CTRL_ARI;
dm_pci_write_config16(pf_dev, sriov_pos + PCI_SRIOV_CTRL,
tmp16);
}
/* Reset to default the number of VFs */
dm_pci_write_config16(dev, sriov_pos + PCI_SRIOV_NUM_VF, 0);
}
static int fdt_fixup_pci_vfs(void *blob, struct extra_iommu_entry *entry,
struct ls_pcie_rc *pcie_rc)
{
struct udevice *dev, *bus;
u16 vf_offset, vf_stride;
int i, sriov_pos;
pci_dev_t bdf;
if (dm_pci_bus_find_bdf(entry->bdf, &dev)) {
printf("ERROR: BDF %d.%d.%d not found\n", PCI_BUS(entry->bdf),
PCI_DEV(entry->bdf), PCI_FUNC(entry->bdf));
return 0;
}
sriov_pos = dm_pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
if (!sriov_pos) {
printf("WARN: trying to set VFs on non-SRIOV dev\n");
return 0;
}
get_vf_offset_and_stride(dev, sriov_pos, entry, &vf_offset, &vf_stride);
for (bus = dev; device_is_on_pci_bus(bus);)
bus = bus->parent;
bdf = entry->bdf - PCI_BDF(dev_seq(bus), 0, 0) + (vf_offset << 8);
for (i = 0; i < entry->num_vfs; i++) {
if (fdt_fixup_pcie_device_ls(blob, bdf, pcie_rc) < 0)
return -1;
bdf += vf_stride << 8;
}
printf("Added %d iommu VF mappings for PF %d.%d.%d\n",
entry->num_vfs, PCI_BUS(entry->bdf),
PCI_DEV(entry->bdf), PCI_FUNC(entry->bdf));
return 0;
}
static void fdt_fixup_pcie_ls(void *blob)
{
struct udevice *dev, *bus;
struct ls_pcie_rc *pcie_rc;
pci_dev_t bdf;
struct extra_iommu_entry *entries;
int i, cnt, nodeoffset;
/* Scan all known buses */
for (pci_find_first_device(&dev);
dev;
pci_find_next_device(&dev)) {
for (bus = dev; device_is_on_pci_bus(bus);)
bus = bus->parent;
/* Only do the fixups for layerscape PCIe controllers */
if (!device_is_compatible(bus, "fsl,ls-pcie") &&
!device_is_compatible(bus, CONFIG_FSL_PCIE_COMPAT))
continue;
pcie_rc = dev_get_priv(bus);
/* the DT fixup must be relative to the hose first_busno */
bdf = dm_pci_get_bdf(dev) - PCI_BDF(dev_seq(bus), 0, 0);
if (fdt_fixup_pcie_device_ls(blob, bdf, pcie_rc) < 0)
break;
}
if (!IS_ENABLED(CONFIG_PCI_IOMMU_EXTRA_MAPPINGS))
goto skip;
list_for_each_entry(pcie_rc, &ls_pcie_list, list) {
nodeoffset = fdt_pcie_get_nodeoffset(blob, pcie_rc);
if (nodeoffset < 0) {
printf("ERROR: couldn't find pci node\n");
continue;
}
entries = get_extra_iommu_ents(blob, nodeoffset,
pcie_rc->dbi_res.start, &cnt);
if (!entries)
continue;
for (i = 0; i < cnt; i++) {
if (entries[i].action == EXTRA_IOMMU_ENTRY_HOTPLUG) {
bdf = entries[i].bdf;
printf("Added iommu map for hotplug %d.%d.%d\n",
PCI_BUS(bdf), PCI_DEV(bdf),
PCI_FUNC(bdf));
if (fdt_fixup_pcie_device_ls(blob, bdf,
pcie_rc) < 0) {
free(entries);
return;
}
} else if (entries[i].action == EXTRA_IOMMU_ENTRY_VFS) {
if (fdt_fixup_pci_vfs(blob, &entries[i],
pcie_rc) < 0) {
free(entries);
return;
}
} else {
printf("Invalid action %d for BDF %d.%d.%d\n",
entries[i].action,
PCI_BUS(entries[i].bdf),
PCI_DEV(entries[i].bdf),
PCI_FUNC(entries[i].bdf));
}
}
free(entries);
}
skip:
pcie_board_fix_fdt(blob);
}
#endif
static void ft_pcie_rc_fix(void *blob, struct ls_pcie_rc *pcie_rc)
{
int off;
struct ls_pcie *pcie = pcie_rc->pcie;
off = fdt_pcie_get_nodeoffset(blob, pcie_rc);
if (off < 0)
return;
if (pcie_rc->enabled && pcie->mode == PCI_HEADER_TYPE_BRIDGE)
fdt_set_node_status(blob, off, FDT_STATUS_OKAY);
else
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED);
}
static void ft_pcie_ep_fix(void *blob, struct ls_pcie_rc *pcie_rc)
{
int off;
struct ls_pcie *pcie = pcie_rc->pcie;
off = fdt_node_offset_by_compat_reg(blob, CONFIG_FSL_PCIE_EP_COMPAT,
pcie_rc->dbi_res.start);
if (off < 0)
return;
if (pcie_rc->enabled && pcie->mode == PCI_HEADER_TYPE_NORMAL)
fdt_set_node_status(blob, off, FDT_STATUS_OKAY);
else
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED);
}
static void ft_pcie_ls_setup(void *blob, struct ls_pcie_rc *pcie_rc)
{
ft_pcie_ep_fix(blob, pcie_rc);
ft_pcie_rc_fix(blob, pcie_rc);
pcie_rc->stream_id_cur = 0;
pcie_rc->next_lut_index = 0;
}
/* Fixup Kernel DT for PCIe */
void ft_pci_setup_ls(void *blob, struct bd_info *bd)
{
struct ls_pcie_rc *pcie_rc;
list_for_each_entry(pcie_rc, &ls_pcie_list, list)
ft_pcie_ls_setup(blob, pcie_rc);
#if defined(CONFIG_FSL_LSCH3) || defined(CONFIG_FSL_LSCH2)
next_stream_id = FSL_PEX_STREAM_ID_START;
fdt_fixup_pcie_ls(blob);
#endif
}
#else /* !CONFIG_OF_BOARD_SETUP */
void ft_pci_setup_ls(void *blob, struct bd_info *bd)
{
}
#endif