mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 01:19:49 +00:00
f69766e4b5
When we go to 36-bit physical addresses we need to keep the concept of the physical CCSRBAR address seperate from the virtual one. For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
571 lines
17 KiB
C
571 lines
17 KiB
C
/*
|
|
* Copyright 2007 Wind River Systems <www.windriver.com>
|
|
* Copyright 2007 Embedded Specialties, Inc.
|
|
* Copyright 2004, 2007 Freescale Semiconductor.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* sbc8548 board configuration file
|
|
*
|
|
* Please refer to doc/README.sbc85xx for more info.
|
|
*
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_BOOKE 1 /* BOOKE */
|
|
#define CONFIG_E500 1 /* BOOKE e500 family */
|
|
#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
|
|
#define CONFIG_MPC8548 1 /* MPC8548 specific */
|
|
#define CONFIG_SBC8548 1 /* SBC8548 board specific */
|
|
|
|
#undef CONFIG_PCI /* enable any pci type devices */
|
|
#undef CONFIG_PCI1 /* PCI controller 1 */
|
|
#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
|
|
#undef CONFIG_RIO
|
|
#undef CONFIG_PCI2
|
|
#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
|
|
|
|
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
|
|
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
|
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
|
|
|
|
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
|
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
|
|
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
|
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
|
|
|
|
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
|
|
|
|
#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 66000000 /* SBC8548 default SYSCLK */
|
|
|
|
/*
|
|
* These can be toggled for performance analysis, otherwise use default.
|
|
*/
|
|
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
|
#define CONFIG_BTB /* toggle branch predition */
|
|
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
|
|
#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
|
|
|
|
/*
|
|
* Only possible on E500 Version 2 or newer cores.
|
|
*/
|
|
#define CONFIG_ENABLE_36BIT_PHYS 1
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
|
|
|
#undef CFG_DRAM_TEST /* memory test, takes time */
|
|
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x00400000
|
|
|
|
/*
|
|
* Base addresses -- Note these are effective addresses where the
|
|
* actual resources get mapped (not physical addresses)
|
|
*/
|
|
#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
|
|
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
|
|
#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
|
|
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
|
|
|
#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
|
|
#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
|
|
#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
|
|
|
|
/*
|
|
* DDR Setup
|
|
*/
|
|
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
|
|
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
|
|
|
#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
|
|
|
|
/*
|
|
* Make sure required options are set
|
|
*/
|
|
#ifndef CONFIG_SPD_EEPROM
|
|
#define CFG_SDRAM_SIZE 256 /* DDR is 256MB */
|
|
#endif
|
|
|
|
#undef CONFIG_CLOCKS_IN_MHZ
|
|
|
|
/*
|
|
* FLASH on the Local Bus
|
|
* Two banks, one 8MB the other 64MB, using the CFI driver.
|
|
* Boot from BR0/OR0 bank at 0xff80_0000
|
|
* Alternate BR6/OR6 bank at 0xfb80_0000
|
|
*
|
|
* BR0:
|
|
* Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
|
|
* Port Size = 8 bits = BRx[19:20] = 01
|
|
* Use GPCM = BRx[24:26] = 000
|
|
* Valid = BRx[31] = 1
|
|
*
|
|
* 0 4 8 12 16 20 24 28
|
|
* 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801 BR0
|
|
*
|
|
* BR6:
|
|
* Base address 6 = 0xfb80_0000 = BR6[0:16] = 1111 1011 1000 0000 0
|
|
* Port Size = 32 bits = BRx[19:20] = 11
|
|
* Use GPCM = BRx[24:26] = 000
|
|
* Valid = BRx[31] = 1
|
|
*
|
|
* 0 4 8 12 16 20 24 28
|
|
* 1111 1011 1000 0000 0001 1000 0000 0001 = fb801801 BR6
|
|
*
|
|
* OR0:
|
|
* Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
|
|
* XAM = OR0[17:18] = 11
|
|
* CSNT = OR0[20] = 1
|
|
* ACS = half cycle delay = OR0[21:22] = 11
|
|
* SCY = 6 = OR0[24:27] = 0110
|
|
* TRLX = use relaxed timing = OR0[29] = 1
|
|
* EAD = use external address latch delay = OR0[31] = 1
|
|
*
|
|
* 0 4 8 12 16 20 24 28
|
|
* 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 OR0
|
|
*
|
|
* OR6:
|
|
* Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0
|
|
* XAM = OR6[17:18] = 11
|
|
* CSNT = OR6[20] = 1
|
|
* ACS = half cycle delay = OR6[21:22] = 11
|
|
* SCY = 6 = OR6[24:27] = 0110
|
|
* TRLX = use relaxed timing = OR6[29] = 1
|
|
* EAD = use external address latch delay = OR6[31] = 1
|
|
*
|
|
* 0 4 8 12 16 20 24 28
|
|
* 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65 OR6
|
|
*/
|
|
|
|
#define CFG_BOOT_BLOCK 0xff800000 /* start of 8MB Flash */
|
|
#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */
|
|
|
|
#define CFG_BR0_PRELIM 0xff800801
|
|
#define CFG_BR6_PRELIM 0xfb801801
|
|
|
|
#define CFG_OR0_PRELIM 0xff806e65
|
|
#define CFG_OR6_PRELIM 0xfc006e65
|
|
|
|
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
|
|
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
|
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
|
|
#undef CFG_FLASH_CHECKSUM
|
|
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
|
|
|
#define CFG_FLASH_CFI_DRIVER
|
|
#define CFG_FLASH_CFI
|
|
#define CFG_FLASH_EMPTY_INFO
|
|
|
|
/* CS5 = Local bus peripherals controlled by the EPLD */
|
|
|
|
#define CFG_BR5_PRELIM 0xf8000801
|
|
#define CFG_OR5_PRELIM 0xff006e65
|
|
#define CFG_EPLD_BASE 0xf8000000
|
|
#define CFG_LED_DISP_BASE 0xf8000000
|
|
#define CFG_USER_SWITCHES_BASE 0xf8100000
|
|
#define CFG_BD_REV 0xf8300000
|
|
#define CFG_EEPROM_BASE 0xf8b00000
|
|
|
|
/*
|
|
* SDRAM on the Local Bus
|
|
*/
|
|
#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
|
|
#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
|
|
|
|
/*
|
|
* Base Register 3 and Option Register 3 configure SDRAM.
|
|
* The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
|
|
*
|
|
* For BR3, need:
|
|
* Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
|
|
* port-size = 32-bits = BR2[19:20] = 11
|
|
* no parity checking = BR2[21:22] = 00
|
|
* SDRAM for MSEL = BR2[24:26] = 011
|
|
* Valid = BR[31] = 1
|
|
*
|
|
* 0 4 8 12 16 20 24 28
|
|
* 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
|
|
*
|
|
*/
|
|
|
|
#define CFG_BR3_PRELIM 0xf0001861
|
|
|
|
/*
|
|
* The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
|
|
*
|
|
* For OR3, need:
|
|
* 64MB mask for AM, OR3[0:7] = 1111 1100
|
|
* XAM, OR3[17:18] = 11
|
|
* 10 columns OR3[19-21] = 011
|
|
* 12 rows OR3[23-25] = 011
|
|
* EAD set for extra time OR[31] = 0
|
|
*
|
|
* 0 4 8 12 16 20 24 28
|
|
* 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
|
|
*/
|
|
|
|
#define CFG_OR3_PRELIM 0xfc006cc0
|
|
|
|
#define CFG_LBC_LCRR 0x00000002 /* LB clock ratio reg */
|
|
#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
|
|
#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
|
|
#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
|
|
|
|
/*
|
|
* LSDMR masks
|
|
*/
|
|
#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
|
|
#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
|
|
#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
|
|
#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
|
|
#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
|
|
#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
|
|
#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
|
|
#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
|
|
#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
|
|
#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
|
|
|
|
#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
|
|
#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
|
|
|
|
/*
|
|
* Common settings for all Local Bus SDRAM commands.
|
|
* At run time, either BSMA1516 (for CPU 1.1)
|
|
* or BSMA1617 (for CPU 1.0) (old)
|
|
* is OR'ed in too.
|
|
*/
|
|
#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
|
|
| CFG_LBC_LSDMR_PRETOACT7 \
|
|
| CFG_LBC_LSDMR_ACTTORW7 \
|
|
| CFG_LBC_LSDMR_BL8 \
|
|
| CFG_LBC_LSDMR_WRC4 \
|
|
| CFG_LBC_LSDMR_CL3 \
|
|
| CFG_LBC_LSDMR_RFEN \
|
|
)
|
|
|
|
#define CONFIG_L1_INIT_RAM
|
|
#define CFG_INIT_RAM_LOCK 1
|
|
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
|
|
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
|
|
|
|
#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
|
|
|
|
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
|
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
|
|
|
/* Serial Port */
|
|
#define CONFIG_CONS_INDEX 1
|
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
#define CFG_NS16550_REG_SIZE 1
|
|
#define CFG_NS16550_CLK 400000000 /* get_bus_freq(0) */
|
|
|
|
#define CFG_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
|
|
|
#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
|
|
#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
|
|
|
|
/* Use the HUSH parser */
|
|
#define CFG_HUSH_PARSER
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
/* pass open firmware flat tree */
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
#define CFG_I2C_EEPROM_ADDR 0x50
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
#define CFG_I2C_OFFSET 0x3000
|
|
|
|
/*
|
|
* General PCI
|
|
* Memory space is mapped 1-1, but I/O space must start from 0.
|
|
*/
|
|
#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
|
|
|
|
#define CFG_PCI1_MEM_BASE 0x80000000
|
|
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
|
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CFG_PCI1_IO_BASE 0x00000000
|
|
#define CFG_PCI1_IO_PHYS 0xe2000000
|
|
#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
|
|
|
|
#ifdef CONFIG_PCI2
|
|
#define CFG_PCI2_MEM_BASE 0xa0000000
|
|
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
|
|
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CFG_PCI2_IO_BASE 0x00000000
|
|
#define CFG_PCI2_IO_PHYS 0xe2800000
|
|
#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
#define CFG_PCIE1_MEM_BASE 0xa0000000
|
|
#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
|
|
#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CFG_PCIE1_IO_BASE 0x00000000
|
|
#define CFG_PCIE1_IO_PHYS 0xe3000000
|
|
#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
|
|
#endif
|
|
|
|
#ifdef CONFIG_RIO
|
|
/*
|
|
* RapidIO MMU
|
|
*/
|
|
#define CFG_RIO_MEM_BASE 0xC0000000
|
|
#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
|
|
#endif
|
|
|
|
#ifdef CONFIG_LEGACY
|
|
#define BRIDGE_ID 17
|
|
#define VIA_ID 2
|
|
#else
|
|
#define BRIDGE_ID 28
|
|
#define VIA_ID 4
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
|
|
#undef CONFIG_EEPRO100
|
|
#undef CONFIG_TULIP
|
|
|
|
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
|
|
/* PCI view of System Memory */
|
|
#define CFG_PCI_MEMORY_BUS 0x00000000
|
|
#define CFG_PCI_MEMORY_PHYS 0x00000000
|
|
#define CFG_PCI_MEMORY_SIZE 0x80000000
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
|
|
#ifndef CONFIG_NET_MULTI
|
|
#define CONFIG_NET_MULTI 1
|
|
#endif
|
|
|
|
#define CONFIG_MII 1 /* MII PHY management */
|
|
#define CONFIG_TSEC1 1
|
|
#define CONFIG_TSEC1_NAME "eTSEC0"
|
|
#define CONFIG_TSEC2 1
|
|
#define CONFIG_TSEC2_NAME "eTSEC1"
|
|
#define CONFIG_TSEC3 1
|
|
#define CONFIG_TSEC3_NAME "eTSEC2"
|
|
#define CONFIG_TSEC4
|
|
#define CONFIG_TSEC4_NAME "eTSEC3"
|
|
#undef CONFIG_MPC85XX_FEC
|
|
|
|
#define TSEC1_PHY_ADDR 0
|
|
#define TSEC2_PHY_ADDR 1
|
|
#define TSEC3_PHY_ADDR 2
|
|
#define TSEC4_PHY_ADDR 3
|
|
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC2_PHYIDX 0
|
|
#define TSEC3_PHYIDX 0
|
|
#define TSEC4_PHYIDX 0
|
|
#define TSEC1_FLAGS TSEC_GIGABIT
|
|
#define TSEC2_FLAGS TSEC_GIGABIT
|
|
#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
|
|
/* Options are: eTSEC[0-3] */
|
|
#define CONFIG_ETHPRIME "eTSEC0"
|
|
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
|
|
#endif /* CONFIG_TSEC_ENET */
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
|
|
#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
|
|
#define CFG_ENV_SIZE 0x2000
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_ELF
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#define CONFIG_CMD_PCI
|
|
#endif
|
|
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Environment Configuration
|
|
*/
|
|
|
|
/* The mac addresses for all ethernet interface */
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_ETHADDR 02:E0:0C:00:00:FD
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD
|
|
#define CONFIG_HAS_ETH2
|
|
#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD
|
|
#define CONFIG_HAS_ETH3
|
|
#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD
|
|
#endif
|
|
|
|
#define CONFIG_IPADDR 192.168.0.55
|
|
|
|
#define CONFIG_HOSTNAME sbc8548
|
|
#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
|
|
#define CONFIG_BOOTFILE /uImage
|
|
#define CONFIG_UBOOTPATH /u-boot.bin /* TFTP server */
|
|
|
|
#define CONFIG_SERVERIP 192.168.0.2
|
|
#define CONFIG_GATEWAYIP 192.168.0.1
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
|
|
#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
|
|
|
|
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
|
|
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
|
|
"tftpflash=tftpboot $loadaddr $uboot; " \
|
|
"protect off " MK_STR(TEXT_BASE) " +$filesize; " \
|
|
"erase " MK_STR(TEXT_BASE) " +$filesize; " \
|
|
"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
|
|
"protect on " MK_STR(TEXT_BASE) " +$filesize; " \
|
|
"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
|
|
"consoledev=ttyS0\0" \
|
|
"ramdiskaddr=2000000\0" \
|
|
"ramdiskfile=uRamdisk\0" \
|
|
"fdtaddr=c00000\0" \
|
|
"fdtfile=sbc8548.dtb\0"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr - $fdtaddr"
|
|
|
|
|
|
#define CONFIG_RAMBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs;" \
|
|
"tftp $ramdiskaddr $ramdiskfile;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
|
|
|
#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
|
|
|
|
#endif /* __CONFIG_H */
|