mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 17:28:15 +00:00
d0ba88f5dd
Right now the rk3399 sdram driver assume that the board has configured with 2 channels, so any possibility to enable single channel on the same driver will encounter channel #1 data training failure. Log: U-Boot TPL board init sdram_init: data training failed rk3399_dmc_init DRAM init failed -5 So, add an algorithm that can capable to compute the active or configured rank with associated channel like a) do rank loop to compute the active rank, with associated channel numbers b) then, succeed the data training only for configured channel c) preserve the rank for given channel d) do channel loop for setting the active channel e) if given rank is zero or inactive on the specific channel, clear the timings for the associated channel f) finally, return error if number of channels is zero Tested in NanoPI-NEO4 since it support single channel sdram configuration. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> (add PI_READ_GATE_TRAINING for LPDDR3 to support rk3399-evb case) Signed-off-by: Kever Yang <Kever.yang@rock-chips.com> |
||
|---|---|---|
| .. | ||
| dmc-rk3368.c | ||
| Kconfig | ||
| Makefile | ||
| sdram_debug.c | ||
| sdram_rk322x.c | ||
| sdram_rk3128.c | ||
| sdram_rk3188.c | ||
| sdram_rk3288.c | ||
| sdram_rk3328.c | ||
| sdram_rk3399.c | ||