mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
272 lines
6.4 KiB
C
272 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
|
* Author: Andy Yan <andy.yan@rock-chips.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <bitfield.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cru_rv1108.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <dm/lists.h>
|
|
#include <dt-bindings/clock/rv1108-cru.h>
|
|
|
|
enum {
|
|
VCO_MAX_HZ = 2400U * 1000000,
|
|
VCO_MIN_HZ = 600 * 1000000,
|
|
OUTPUT_MAX_HZ = 2400U * 1000000,
|
|
OUTPUT_MIN_HZ = 24 * 1000000,
|
|
};
|
|
|
|
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
|
|
|
|
#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
|
|
.refdiv = _refdiv,\
|
|
.fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\
|
|
.postdiv1 = _postdiv1, .postdiv2 = _postdiv2};\
|
|
_Static_assert(((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ) *\
|
|
OSC_HZ / (_refdiv * _postdiv1 * _postdiv2) == hz,\
|
|
#hz "Hz cannot be hit with PLL "\
|
|
"divisors on line " __stringify(__LINE__));
|
|
|
|
/* use integer mode */
|
|
static inline int rv1108_pll_id(enum rk_clk_id clk_id)
|
|
{
|
|
int id = 0;
|
|
|
|
switch (clk_id) {
|
|
case CLK_ARM:
|
|
case CLK_DDR:
|
|
id = clk_id - 1;
|
|
break;
|
|
case CLK_GENERAL:
|
|
id = 2;
|
|
break;
|
|
default:
|
|
printf("invalid pll id:%d\n", clk_id);
|
|
id = -1;
|
|
break;
|
|
}
|
|
|
|
return id;
|
|
}
|
|
|
|
static uint32_t rkclk_pll_get_rate(struct rv1108_cru *cru,
|
|
enum rk_clk_id clk_id)
|
|
{
|
|
uint32_t refdiv, fbdiv, postdiv1, postdiv2;
|
|
uint32_t con0, con1, con3;
|
|
int pll_id = rv1108_pll_id(clk_id);
|
|
struct rv1108_pll *pll = &cru->pll[pll_id];
|
|
uint32_t freq;
|
|
|
|
con3 = readl(&pll->con3);
|
|
|
|
if (con3 & WORK_MODE_MASK) {
|
|
con0 = readl(&pll->con0);
|
|
con1 = readl(&pll->con1);
|
|
fbdiv = (con0 >> FBDIV_SHIFT) & FBDIV_MASK;
|
|
postdiv1 = (con1 & POSTDIV1_MASK) >> POSTDIV1_SHIFT;
|
|
postdiv2 = (con1 & POSTDIV2_MASK) >> POSTDIV2_SHIFT;
|
|
refdiv = (con1 & REFDIV_MASK) >> REFDIV_SHIFT;
|
|
freq = (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000;
|
|
} else {
|
|
freq = OSC_HZ;
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
static int rv1108_mac_set_clk(struct rv1108_cru *cru, ulong rate)
|
|
{
|
|
uint32_t con = readl(&cru->clksel_con[24]);
|
|
ulong pll_rate;
|
|
uint8_t div;
|
|
|
|
if ((con >> MAC_PLL_SEL_SHIFT) & MAC_PLL_SEL_GPLL)
|
|
pll_rate = rkclk_pll_get_rate(cru, CLK_GENERAL);
|
|
else
|
|
pll_rate = rkclk_pll_get_rate(cru, CLK_ARM);
|
|
|
|
/*default set 50MHZ for gmac*/
|
|
if (!rate)
|
|
rate = 50000000;
|
|
|
|
div = DIV_ROUND_UP(pll_rate, rate) - 1;
|
|
if (div <= 0x1f)
|
|
rk_clrsetreg(&cru->clksel_con[24], MAC_CLK_DIV_MASK,
|
|
div << MAC_CLK_DIV_SHIFT);
|
|
else
|
|
debug("Unsupported div for gmac:%d\n", div);
|
|
|
|
return DIV_TO_RATE(pll_rate, div);
|
|
}
|
|
|
|
static int rv1108_sfc_set_clk(struct rv1108_cru *cru, uint rate)
|
|
{
|
|
u32 con = readl(&cru->clksel_con[27]);
|
|
u32 pll_rate;
|
|
u32 div;
|
|
|
|
if ((con >> SFC_PLL_SEL_SHIFT) && SFC_PLL_SEL_GPLL)
|
|
pll_rate = rkclk_pll_get_rate(cru, CLK_GENERAL);
|
|
else
|
|
pll_rate = rkclk_pll_get_rate(cru, CLK_DDR);
|
|
|
|
div = DIV_ROUND_UP(pll_rate, rate) - 1;
|
|
if (div <= 0x3f)
|
|
rk_clrsetreg(&cru->clksel_con[27], SFC_CLK_DIV_MASK,
|
|
div << SFC_CLK_DIV_SHIFT);
|
|
else
|
|
debug("Unsupported sfc clk rate:%d\n", rate);
|
|
|
|
return DIV_TO_RATE(pll_rate, div);
|
|
}
|
|
|
|
static ulong rv1108_saradc_get_clk(struct rv1108_cru *cru)
|
|
{
|
|
u32 div, val;
|
|
|
|
val = readl(&cru->clksel_con[22]);
|
|
div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT,
|
|
CLK_SARADC_DIV_CON_WIDTH);
|
|
|
|
return DIV_TO_RATE(OSC_HZ, div);
|
|
}
|
|
|
|
static ulong rv1108_saradc_set_clk(struct rv1108_cru *cru, uint hz)
|
|
{
|
|
int src_clk_div;
|
|
|
|
src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1;
|
|
assert(src_clk_div < 128);
|
|
|
|
rk_clrsetreg(&cru->clksel_con[22],
|
|
CLK_SARADC_DIV_CON_MASK,
|
|
src_clk_div << CLK_SARADC_DIV_CON_SHIFT);
|
|
|
|
return rv1108_saradc_get_clk(cru);
|
|
}
|
|
|
|
static ulong rv1108_clk_get_rate(struct clk *clk)
|
|
{
|
|
struct rv1108_clk_priv *priv = dev_get_priv(clk->dev);
|
|
|
|
switch (clk->id) {
|
|
case 0 ... 63:
|
|
return rkclk_pll_get_rate(priv->cru, clk->id);
|
|
case SCLK_SARADC:
|
|
return rv1108_saradc_get_clk(priv->cru);
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
}
|
|
|
|
static ulong rv1108_clk_set_rate(struct clk *clk, ulong rate)
|
|
{
|
|
struct rv1108_clk_priv *priv = dev_get_priv(clk->dev);
|
|
ulong new_rate;
|
|
|
|
switch (clk->id) {
|
|
case SCLK_MAC:
|
|
new_rate = rv1108_mac_set_clk(priv->cru, rate);
|
|
break;
|
|
case SCLK_SFC:
|
|
new_rate = rv1108_sfc_set_clk(priv->cru, rate);
|
|
break;
|
|
case SCLK_SARADC:
|
|
new_rate = rv1108_saradc_set_clk(priv->cru, rate);
|
|
break;
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
|
|
return new_rate;
|
|
}
|
|
|
|
static const struct clk_ops rv1108_clk_ops = {
|
|
.get_rate = rv1108_clk_get_rate,
|
|
.set_rate = rv1108_clk_set_rate,
|
|
};
|
|
|
|
static void rkclk_init(struct rv1108_cru *cru)
|
|
{
|
|
unsigned int apll = rkclk_pll_get_rate(cru, CLK_ARM);
|
|
unsigned int dpll = rkclk_pll_get_rate(cru, CLK_DDR);
|
|
unsigned int gpll = rkclk_pll_get_rate(cru, CLK_GENERAL);
|
|
|
|
rk_clrsetreg(&cru->clksel_con[0], CORE_CLK_DIV_MASK,
|
|
0 << MAC_CLK_DIV_SHIFT);
|
|
|
|
printf("APLL: %d DPLL:%d GPLL:%d\n", apll, dpll, gpll);
|
|
}
|
|
|
|
static int rv1108_clk_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct rv1108_clk_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->cru = dev_read_addr_ptr(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv1108_clk_probe(struct udevice *dev)
|
|
{
|
|
struct rv1108_clk_priv *priv = dev_get_priv(dev);
|
|
|
|
rkclk_init(priv->cru);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rv1108_clk_bind(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
struct udevice *sys_child;
|
|
struct sysreset_reg *priv;
|
|
|
|
/* The reset driver does not have a device node, so bind it here */
|
|
ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
|
|
&sys_child);
|
|
if (ret) {
|
|
debug("Warning: No sysreset driver: ret=%d\n", ret);
|
|
} else {
|
|
priv = malloc(sizeof(struct sysreset_reg));
|
|
priv->glb_srst_fst_value = offsetof(struct rv1108_cru,
|
|
glb_srst_fst_val);
|
|
priv->glb_srst_snd_value = offsetof(struct rv1108_cru,
|
|
glb_srst_snd_val);
|
|
sys_child->priv = priv;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP)
|
|
ret = offsetof(struct rk3368_cru, softrst_con[0]);
|
|
ret = rockchip_reset_bind(dev, ret, 13);
|
|
if (ret)
|
|
debug("Warning: software reset driver bind faile\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id rv1108_clk_ids[] = {
|
|
{ .compatible = "rockchip,rv1108-cru" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(clk_rv1108) = {
|
|
.name = "clk_rv1108",
|
|
.id = UCLASS_CLK,
|
|
.of_match = rv1108_clk_ids,
|
|
.priv_auto_alloc_size = sizeof(struct rv1108_clk_priv),
|
|
.ofdata_to_platdata = rv1108_clk_ofdata_to_platdata,
|
|
.ops = &rv1108_clk_ops,
|
|
.bind = rv1108_clk_bind,
|
|
.probe = rv1108_clk_probe,
|
|
};
|