mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
f85a8e8d1d
Delete CONFIG_SKIP_LOWLEVEL_INIT define in ls1021atwr.h and ls1021aqds.h can let it run cpu_init_cp15 to enable i-cache. First stage of u-boot can run faster after that. There is a description about skip lowlevel init in board/freescale/ls1021atwr/README. Signed-off-by: Xiaoliang Yang <xiaoliang.yang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
115 lines
4.8 KiB
Text
115 lines
4.8 KiB
Text
Overview
|
|
--------
|
|
The LS1021ATWR is a Freescale reference board that hosts the LS1021A SoC.
|
|
|
|
LS1021A SoC Overview
|
|
------------------
|
|
The QorIQ LS1 family, which includes the LS1021A communications processor,
|
|
is built on Layerscape architecture, the industry's first software-aware,
|
|
core-agnostic networking architecture to offer unprecedented efficiency
|
|
and scale.
|
|
|
|
A member of the value-performance tier, the QorIQ LS1021A processor provides
|
|
extensive integration and power efficiency for fanless, small form factor
|
|
enterprise networking applications. Incorporating dual ARM Cortex-A7 cores
|
|
running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark
|
|
performance of over 6,000, as well as virtualization support, advanced
|
|
security features and the broadest array of high-speed interconnects and
|
|
optimized peripheral features ever offered in a sub-3 W processor.
|
|
|
|
The QorIQ LS1021A processor features an integrated LCD controller,
|
|
CAN controller for implementing industrial protocols, DDR3L/4 running
|
|
up to 1600 MHz, integrated security engine and QUICC Engine, and ECC
|
|
protection on both L1 and L2 caches. The LS1021A processor is pin- and
|
|
software-compatible with the QorIQ LS1020A and LS1022A processors.
|
|
|
|
The LS1021A SoC includes the following function and features:
|
|
|
|
- ARM Cortex-A7 MPCore compliant with ARMv7-A architecture
|
|
- Dual high-preformance ARM Cortex-A7 cores, each core includes:
|
|
- 32 Kbyte L1 Instruction Cache and Data Cache for each core (ECC protection)
|
|
- 512 Kbyte shared coherent L2 Cache (with ECC protection)
|
|
- NEON Co-processor (per core)
|
|
- 40-bit physical addressing
|
|
- Vector floating-point support
|
|
- ARM Core-Link CCI-400 Cache Coherent Interconnect
|
|
- One DDR3L/DDR4 SDRAM memory controller with x8/x16/x32-bit configuration
|
|
supporting speeds up to 1600Mtps
|
|
- ECC and interleaving support
|
|
- VeTSEC Ethernet complex
|
|
- Up to 3x virtualized 10/100/1000 Ethernet controllers
|
|
- MII, RMII, RGMII, and SGMII support
|
|
- QoS, lossless flow control, and IEEE 1588 support
|
|
- 4-lane 6GHz SerDes
|
|
- High speed interconnect (4 SerDes lanes with are muxed for these protocol)
|
|
- Two PCI Express Gen2 controllers running at up to 5 GHz
|
|
- One Serial ATA 3.0 supporting 6 GT/s operation
|
|
- Two SGMII interfaces supporting 1000 Mbps
|
|
- Additional peripheral interfaces
|
|
- One high-speed USB 3.0 controller with integrated PHY and one high-speed
|
|
USB 2.00 controller with ULPI
|
|
- Integrated flash controller (IFC) with 16-bit interface
|
|
- Quad SPI NOR Flash
|
|
- One enhanced Secure digital host controller
|
|
- Display controller unit (DCU) 24-bit RGB (12-bit DDR pin interface)
|
|
- Ten UARTs comprised of two 16550 compliant DUARTs, and six low power
|
|
UARTs
|
|
- Three I2C controllers
|
|
- Eight FlexTimers four supporting PWM and four FlexCAN ports
|
|
- Four GPIO controllers supporting up to 109 general purpose I/O signals
|
|
- Integrated advanced audio block:
|
|
- Four synchronous audio interfaces (SAI)
|
|
- Sony/Philips Digital Interconnect Format (SPDIF)
|
|
- Asynchronous Sample Rate Converter (ASRC)
|
|
- Hardware based crypto offload engine
|
|
- IPSec forwarding at up to 1Gbps
|
|
- QorIQ Trust Architecture, Secure Boot, and ARM TrustZone supported
|
|
- Public key hardware accelerator
|
|
- True Random Number Generator (NIST Certified)
|
|
- Advanced Encryption Standard Accelerators (AESA)
|
|
- Data Encryption Standard Accelerators
|
|
- QUICC Engine ULite block
|
|
- Two universal communication controllers (TDM and HDLC) supporting 64
|
|
multichannels, each running at 64 Kbps
|
|
- Support for 256 channels of HDLC
|
|
- QorIQ TrustArchitecture with Secure Boot, as well as ARM TrustZone supported
|
|
|
|
LS1021ATWR board Overview
|
|
-------------------------
|
|
- DDR Controller
|
|
- Supports rates of up to 1600 MHz data-rate
|
|
- Supports one DDR3LP SDRAM.
|
|
- IFC/Local Bus
|
|
- NOR: 128MB 16-bit NOR Flash
|
|
- Ethernet
|
|
- Three on-board RGMII 10/100/1G ethernet ports.
|
|
- CPLD
|
|
- Clocks
|
|
- System and DDR clock (SYSCLK, DDRCLK)
|
|
- SERDES clocks
|
|
- Power Supplies
|
|
- SDHC
|
|
- SDHC/SDXC connector
|
|
- Other IO
|
|
- One Serial port
|
|
- Three I2C ports
|
|
|
|
Memory map
|
|
-----------
|
|
The addresses in brackets are physical addresses.
|
|
|
|
Start Address End Address Description Size
|
|
0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
|
|
0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
|
|
0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
|
|
0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
|
|
0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
|
|
0x00_4000_0000 0x00_5FFF_FFFF QSPI 512MB
|
|
0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
|
|
0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB
|
|
|
|
LS1021a rev1.0 Soc specific Options/Settings
|
|
--------------------------------------------
|
|
If the LS1021a Soc is rev1.0, you need modify the configure file.
|
|
Add the following define in include/configs/ls1021atwr.h:
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|