Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-19 11:18:28 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/cpu/ixp/start.S
Ingo van Lil 3eb90bad65 Generic udelay() with watchdog support 
According to the PPC reference implementation the udelay() function is
responsible for resetting the watchdog timer as frequently as needed.
Most other architectures do not meet that requirement, so long-running
operations might result in a watchdog reset.

This patch adds a generic udelay() function which takes care of
resetting the watchdog before calling an architecture-specific
__udelay().

Signed-off-by: Ingo van Lil <inguin@gmx.de>
2009-12-05 01:08:53 +01:00

525 lines
12 KiB
ArmAsm
Raw Blame History

/* vi: set ts=8 sw=8 noet: */
/*
* u-boot - Startup Code for XScale IXP
*
* Copyright (C) 2003 Kyle Harris <kharris@nexus-tech.net>
*
* Based on startup code example contained in the
* Intel IXP4xx Programmer's Guide and past u-boot Start.S
* samples.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/ixp425.h>
#define MMU_Control_M 0x001 /* Enable MMU */
#define MMU_Control_A 0x002 /* Enable address alignment faults */
#define MMU_Control_C 0x004 /* Enable cache */
#define MMU_Control_W 0x008 /* Enable write-buffer */
#define MMU_Control_P 0x010 /* Compatability: 32 bit code */
#define MMU_Control_D 0x020 /* Compatability: 32 bit data */
#define MMU_Control_L 0x040 /* Compatability: */
#define MMU_Control_B 0x080 /* Enable Big-Endian */
#define MMU_Control_S 0x100 /* Enable system protection */
#define MMU_Control_R 0x200 /* Enable ROM protection */
#define MMU_Control_I 0x1000 /* Enable Instruction cache */
#define MMU_Control_X 0x2000 /* Set interrupt vectors at 0xFFFF0000 */
#define MMU_Control_Init (MMU_Control_P|MMU_Control_D|MMU_Control_L)
/*
* Macro definitions
*/
/* Delay a bit */
.macro DELAY_FOR cycles, reg0
ldr \reg0, =\cycles
subs \reg0, \reg0, #1
subne pc, pc, #0xc
.endm
/* wait for coprocessor write complete */
.macro CPWAIT reg
mrc p15,0,\reg,c2,c0,0
mov \reg,\reg
sub pc,pc,#4
.endm
.globl _start
_start: b reset
ldr pc, _undefined_instruction
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
ldr pc, _data_abort
ldr pc, _not_used
ldr pc, _irq
ldr pc, _fiq
_undefined_instruction: .word undefined_instruction
_software_interrupt: .word software_interrupt
_prefetch_abort: .word prefetch_abort
_data_abort: .word data_abort
_not_used: .word not_used
_irq: .word irq
_fiq: .word fiq
.balignl 16,0xdeadbeef
/*
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
* - relocate armboot to ram
* - setup stack
* - jump to second stage
*/
_TEXT_BASE:
.word TEXT_BASE
.globl _armboot_start
_armboot_start:
.word _start
/*
* These are defined in the board-specific linker script.
*/
.globl _bss_start
_bss_start:
.word __bss_start
.globl _bss_end
_bss_end:
.word _end
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
IRQ_STACK_START:
.word 0x0badc0de
/* IRQ stack memory (calculated at run-time) */
.globl FIQ_STACK_START
FIQ_STACK_START:
.word 0x0badc0de
#endif
/****************************************************************************/
/* */
/* the actual reset code */
/* */
/****************************************************************************/
reset:
/* disable mmu, set big-endian */
mov r0, #0xf8
mcr p15, 0, r0, c1, c0, 0
CPWAIT r0
/* invalidate I & D caches & BTB */
mcr p15, 0, r0, c7, c7, 0
CPWAIT r0
/* invalidate I & Data TLB */
mcr p15, 0, r0, c8, c7, 0
CPWAIT r0
/* drain write and fill buffers */
mcr p15, 0, r0, c7, c10, 4
CPWAIT r0
/* disable write buffer coalescing */
mrc p15, 0, r0, c1, c0, 1
orr r0, r0, #1
mcr p15, 0, r0, c1, c0, 1
CPWAIT r0
/* set EXP CS0 to the optimum timing */
ldr r1, =CONFIG_SYS_EXP_CS0
ldr r2, =IXP425_EXP_CS0
str r1, [r2]
/* make sure flash is visible at 0 */
#if 0
ldr r2, =IXP425_EXP_CFG0
ldr r1, [r2]
orr r1, r1, #0x80000000
str r1, [r2]
#endif
mov r1, #CONFIG_SYS_SDR_CONFIG
ldr r2, =IXP425_SDR_CONFIG
str r1, [r2]
/* disable refresh cycles */
mov r1, #0
ldr r3, =IXP425_SDR_REFRESH
str r1, [r3]
/* send nop command */
mov r1, #3
ldr r4, =IXP425_SDR_IR
str r1, [r4]
DELAY_FOR 0x4000, r0
/* set SDRAM internal refresh val */
ldr r1, =CONFIG_SYS_SDRAM_REFRESH_CNT
str r1, [r3]
DELAY_FOR 0x4000, r0
/* send precharge-all command to close all open banks */
mov r1, #2
str r1, [r4]
DELAY_FOR 0x4000, r0
/* provide 8 auto-refresh cycles */
mov r1, #4
mov r5, #8
111: str r1, [r4]
DELAY_FOR 0x100, r0
subs r5, r5, #1
bne 111b
/* set mode register in sdram */
mov r1, #CONFIG_SYS_SDR_MODE_CONFIG
str r1, [r4]
DELAY_FOR 0x4000, r0
/* send normal operation command */
mov r1, #6
str r1, [r4]
DELAY_FOR 0x4000, r0
/* copy */
mov r0, #0
mov r4, r0
add r2, r0, #CONFIG_SYS_MONITOR_LEN
mov r1, #0x10000000
mov r5, r1
30:
ldr r3, [r0], #4
str r3, [r1], #4
cmp r0, r2
bne 30b
/* invalidate I & D caches & BTB */
mcr p15, 0, r0, c7, c7, 0
CPWAIT r0
/* invalidate I & Data TLB */
mcr p15, 0, r0, c8, c7, 0
CPWAIT r0
/* drain write and fill buffers */
mcr p15, 0, r0, c7, c10, 4
CPWAIT r0
/* move flash to 0x50000000 */
ldr r2, =IXP425_EXP_CFG0
ldr r1, [r2]
bic r1, r1, #0x80000000
str r1, [r2]
nop
nop
nop
nop
nop
nop
/* invalidate I & Data TLB */
mcr p15, 0, r0, c8, c7, 0
CPWAIT r0
/* enable I cache */
mrc p15, 0, r0, c1, c0, 0
orr r0, r0, #MMU_Control_I
mcr p15, 0, r0, c1, c0, 0
CPWAIT r0
mrs r0,cpsr /* set the cpu to SVC32 mode */
bic r0,r0,#0x1f /* (superviser mode, M=10011) */
orr r0,r0,#0x13
msr cpsr,r0
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
cmp r0, r1 /* don't reloc during debug */
beq stack_setup
ldr r2, _armboot_start
ldr r3, _bss_start
sub r2, r3, r2 /* r2 <- size of armboot */
add r2, r0, r2 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
/* Set up the stack */
stack_setup:
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
sub sp, r0, #12 /* leave 3 words for abort-stack */
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
cmp r0, r1
ble clbss_l
ldr pc, _start_armboot
_start_armboot: .word start_armboot
/****************************************************************************/
/* */
/* Interrupt handling */
/* */
/****************************************************************************/
/* IRQ stack frame */
#define S_FRAME_SIZE 72
#define S_OLD_R0 68
#define S_PSR 64
#define S_PC 60
#define S_LR 56
#define S_SP 52
#define S_IP 48
#define S_FP 44
#define S_R10 40
#define S_R9 36
#define S_R8 32
#define S_R7 28
#define S_R6 24
#define S_R5 20
#define S_R4 16
#define S_R3 12
#define S_R2 8
#define S_R1 4
#define S_R0 0
#define MODE_SVC 0x13
/* use bad_save_user_regs for abort/prefetch/undef/swi ... */
.macro bad_save_user_regs
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} /* Calling r0-r12 */
add r8, sp, #S_PC
ldr r2, _armboot_start
sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
add r5, sp, #S_SP
mov r1, lr
stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */
mov r0, sp
.endm
/* use irq_save_user_regs / irq_restore_user_regs for */
/* IRQ/FIQ handling */
.macro irq_save_user_regs
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} /* Calling r0-r12 */
add r8, sp, #S_PC
stmdb r8, {sp, lr}^ /* Calling SP, LR */
str lr, [r8, #0] /* Save calling PC */
mrs r6, spsr
str r6, [r8, #4] /* Save CPSR */
str r0, [r8, #8] /* Save OLD_R0 */
mov r0, sp
.endm
.macro irq_restore_user_regs
ldmia sp, {r0 - lr}^ @ Calling r0 - lr
mov r0, r0
ldr lr, [sp, #S_PC] @ Get PC
add sp, sp, #S_FRAME_SIZE
subs pc, lr, #4 @ return & move spsr_svc into cpsr
.endm
.macro get_bad_stack
ldr r13, _armboot_start @ setup our mode stack
sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
str lr, [r13] @ save caller lr / spsr
mrs lr, spsr
str lr, [r13, #4]
mov r13, #MODE_SVC @ prepare SVC-Mode
msr spsr_c, r13
mov lr, pc
movs pc, lr
.endm
.macro get_irq_stack @ setup IRQ stack
ldr sp, IRQ_STACK_START
.endm
.macro get_fiq_stack @ setup FIQ stack
ldr sp, FIQ_STACK_START
.endm
/****************************************************************************/
/* */
/* exception handlers */
/* */
/****************************************************************************/
.align 5
undefined_instruction:
get_bad_stack
bad_save_user_regs
bl do_undefined_instruction
.align 5
software_interrupt:
get_bad_stack
bad_save_user_regs
bl do_software_interrupt
.align 5
prefetch_abort:
get_bad_stack
bad_save_user_regs
bl do_prefetch_abort
.align 5
data_abort:
get_bad_stack
bad_save_user_regs
bl do_data_abort
.align 5
not_used:
get_bad_stack
bad_save_user_regs
bl do_not_used
#ifdef CONFIG_USE_IRQ
.align 5
irq:
get_irq_stack
irq_save_user_regs
bl do_irq
irq_restore_user_regs
.align 5
fiq:
get_fiq_stack
irq_save_user_regs /* someone ought to write a more */
bl do_fiq /* effiction fiq_save_user_regs */
irq_restore_user_regs
#else
.align 5
irq:
get_bad_stack
bad_save_user_regs
bl do_irq
.align 5
fiq:
get_bad_stack
bad_save_user_regs
bl do_fiq
#endif
/****************************************************************************/
/* */
/* Reset function: Use Watchdog to reset */
/* */
/****************************************************************************/
.align 5
.globl reset_cpu
reset_cpu:
ldr r1, =0x482e
ldr r2, =IXP425_OSWK
str r1, [r2]
ldr r1, =0x0fff
ldr r2, =IXP425_OSWT
str r1, [r2]
ldr r1, =0x5
ldr r2, =IXP425_OSWE
str r1, [r2]
b reset_endless
reset_endless:
b reset_endless
#ifdef CONFIG_USE_IRQ
.LC0: .word loops_per_jiffy
/*
* 0 <= r0 <= 2000
*/
.globl __udelay
__udelay:
mov r2, #0x6800
orr r2, r2, #0x00db
mul r0, r2, r0
ldr r2, .LC0
ldr r2, [r2] @ max = 0x0fffffff
mov r0, r0, lsr #11 @ max = 0x00003fff
mov r2, r2, lsr #11 @ max = 0x0003ffff
mul r0, r2, r0 @ max = 2^32-1
movs r0, r0, lsr #6
delay_loop:
subs r0, r0, #1
bne delay_loop
mov pc, lr
#endif /* CONFIG_USE_IRQ */
Reference in a new issue View git blame Copy permalink